Rugged Ridge 11546.62 Installation guide

Brand
Rugged Ridge
Model
11546.62
Type
Installation guide

Rugged Ridge 11546.62 is a heavy-duty tire carrier designed for Jeep Wranglers from 1997 to 2006. It allows for easy access to the rear cargo area and secure mounting of an off-road spare tire. The carrier is made of durable materials and is built to withstand the rigors of off-road use.

Here are some of the key features and benefits of the Rugged Ridge 11546.62:

  • Easy installation: The carrier can be installed in a matter of minutes using the included hardware.
  • Durable construction: The carrier is made of heavy-duty steel and is built to last.
  • Secure mounting: The carrier securely mounts the spare tire to the tailgate, preventing it from bouncing around or falling off.

Rugged Ridge 11546.62 is a heavy-duty tire carrier designed for Jeep Wranglers from 1997 to 2006. It allows for easy access to the rear cargo area and secure mounting of an off-road spare tire. The carrier is made of durable materials and is built to withstand the rigors of off-road use.

Here are some of the key features and benefits of the Rugged Ridge 11546.62:

  • Easy installation: The carrier can be installed in a matter of minutes using the included hardware.
  • Durable construction: The carrier is made of heavy-duty steel and is built to last.
  • Secure mounting: The carrier securely mounts the spare tire to the tailgate, preventing it from bouncing around or falling off.
Copyright © 2016 Omix-Ada®, Inc.
460 HORIZON DR. SUITE 100 | SUWANEE, GA 30024 | PHONE: 770-614-6101 | FAX: 770-614-6069 | [email protected]
HD Tire Carrier, Jeep Wrangler 97-06
Page 1/5
Part #11646.62
OMIX-ADA® TECHNICAL SUPPORT
PHONE: M-F 8am - 5pm EST 1-800-449-6649 | EMAIL: [email protected]
FOR WARRANTY INFORMATION VISIT: www.Omix-Ada.com
Wheel Mount
1/2”-20 Bolt x 3
M8 Bolt x 4 M8 Washer x 4 M8 Nut x 4
Lug Nut x 3
5/16”-18 Bolt x 4 5/16”-18 Washer x 4
Copyright © 2016 Omix-Ada®, Inc.
460 HORIZON DR. SUITE 100 | SUWANEE, GA 30024 | PHONE: 770-614-6101 | FAX: 770-614-6069 | [email protected]
HD Tire Carrier, Jeep Wrangler 97-06
Page 2/5
Important Safety Information
Your Rugged Ridge® Tire Carrier is intended to increase the utility and enjoyment of your
Jeep® by providing easy access to your rear cargo area and secure mounting of your off-
road spare tire. Before installation, please take a moment to review the following safety infor-
mation and installation instructions. Important safety information is generally preceded by one
of three signal words indicating the relative risk of injury. The signal words mean:
Installation Instructions
• Wear gloves and safety glasses during installation.
• Tire Carrier and spare tire/wheel are heavy. Use jack or seek assistance when lifting, fastening
parts, or installing wheel/tire to carrier.
• Tire Carrier is subject to vibration and shock loads from on and off road use. Regularly inspect
carrier and lug nuts fastening spare to carrier. Do not use and repair if damaged. Use thread
locker and keep lug nuts torqued to 80 ft./lbs.
A hazardous situation which, if not avoided, could result in serious
injury or death. You can be killed or seriously hurt if you do not follow
instructions.
A hazardous situation which, if not avoided, could result in minor or
moderate injury. You can be moderately hurt and may also suffer
property damage if you do not follow instructions.
To reduce risk of personal injury during assembly and use of this product:
Careful attention is required to this instruction or operation, but does
not generally relate to personal injury. Damage to your product or
other property may result if you do not follow instructions.
WARNING
!
CAUTION
!
NOTICE
Copyright © 2016 Omix-Ada®, Inc.
460 HORIZON DR. SUITE 100 | SUWANEE, GA 30024 | PHONE: 770-614-6101 | FAX: 770-614-6069 | [email protected]
HD Tire Carrier, Jeep Wrangler 97-06
Page 3/5
1. Remove spare tire.
- If using HD Wheel Mount with Rugged
Ridge HD Hinge Casting (Part# 11546.61), it is
necessary to use the installations included with Hinge
Casting.
2. On vehicles equipped with a third brake light,
using Phillips screwdriver, remove wiring cover inside
tailgate. Note where each wire is attached, then
disconnect and rout wires out of the cover bracket.
Pass third brake light wiring through tailgate.
NOTICE
Copyright © 2016 Omix-Ada®, Inc.
460 HORIZON DR. SUITE 100 | SUWANEE, GA 30024 | PHONE: 770-614-6101 | FAX: 770-614-6069 | [email protected]
HD Tire Carrier, Jeep Wrangler 97-06
Page 4/5
4. Remove stock spare tire carrier.
3. Using 13mm socket, remove third brake light
housing.
5. Attach Wheel Mount to tailgate using supplied
5/16” hardware.
Copyright © 2016 Omix-Ada®, Inc.
460 HORIZON DR. SUITE 100 | SUWANEE, GA 30024 | PHONE: 770-614-6101 | FAX: 770-614-6069 | [email protected]
HD Tire Carrier, Jeep Wrangler 97-06
Page 5/5
5x 5.5” 5x 4.5”
7. If using a 5x5.5” bolt pattern wheel, thread
supplied 1/2” bolts into outer threaded holes on
Wheel Mount. If using a 5x4.5” bolt pattern wheel,
thread supplied 1/2” into inner threaded holes on
Wheel Mount.
6. Install OE third brake light using supplied M8
hardware. Feed third brake light back through
tailgate and reconnect wires to tailgate ...
8. Re-install spare tire and torque lug nuts to 80ft•lb.
Have another person help lift the tire
onto tire carrier.
Failure to tighten lug nuts to proper
torque specication could result in
serious injury or property damage.
CAUTION
!
WARNING
!
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Rugged Ridge 11546.62 Installation guide

Brand
Rugged Ridge
Model
11546.62
Type
Installation guide

Rugged Ridge 11546.62 is a heavy-duty tire carrier designed for Jeep Wranglers from 1997 to 2006. It allows for easy access to the rear cargo area and secure mounting of an off-road spare tire. The carrier is made of durable materials and is built to withstand the rigors of off-road use.

Here are some of the key features and benefits of the Rugged Ridge 11546.62:

  • Easy installation: The carrier can be installed in a matter of minutes using the included hardware.
  • Durable construction: The carrier is made of heavy-duty steel and is built to last.
  • Secure mounting: The carrier securely mounts the spare tire to the tailgate, preventing it from bouncing around or falling off.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents