2. WURM
  3. DGF980

WURM DGF980 Product information

  • I've reviewed the datasheet for the Wurm DGF980 temperature sensor. It's designed for high-temperature measurements, particularly in heating and ventilation systems. The sensor uses a precise NTC resistor and has a heat-resistant 6m cable. I'm ready to answer any questions you may have.
  • What is the measurement range of the sensor?
    What is the measuring precision?
    What is the length of the connection cable?
DGF980
Temperature sensor for high temperatures
DGF980_Vx.x_PI_2018-09_EN Subject to technical changes Page 1 of 11
Front view
Features
Measurement of high temperatures, e.g. of hot water in heating and ventilation systems
Precision NTC resistor
Dimensions
Technical data
Ambient temperature
0…+150°C
Degree of protection
IP65
Measurement cell
NTC resistor
Measuring precision
Better than ±1.5K in the range of +25…+120°C
Insulation
Insulation resistance >1MΩ, test voltage 1000V, test duration 1s
Connection cable
6m, heat resistant up to 150°C
Weight
About 190g
RoHS II
NOTE
To calibrate the measured section, please refer to the instructions in the
documentation for the device.
Validity of the documentation
Date
2018-09
Documentation status
This document automatically ceases to be valid if a new technical description is issued.
Manufacturer: Wurm GmbH & Co. KG Elektronische Systeme, Morsbachtalstraße 30, D-42857 Remscheid
For further information, see our website at www.wurm.de
/