Philips 26HFL5561L/27 User manual

Brand: Philips

Model: 26HFL5561L/27

Category: LCD TVs

Type: User manual

26HFL5561L/27

26HFL5561V/27

32HFL5561D/27

32HFL5561L/27

32HFL5561V/27

32HFL4441D/27

32HFL4461F/27

37HFL4481F/27

37HFL5581D/27

37HFL5581L/27

37HFL5581V/27

42HFL5581L/27

42HFL5581V/27

52HFL5581L/27

52HFL5581V/27



EN User manual

Enableordisabletheremotecontrol  16

Enablestandalonemode(Decryptioncontrol) 16

Congurethecontroloptions  16

13 Congure different settings 17

ConguretheSmartFeatures  17

ConguretheV-chipandclosedcaptionsettings 19

14 Clone data (TV Setup Data) 20

DownloadclonedatafromaUSBdevice  20

DownloadclonedatafromanRFchannel 20

15 Connect devices 21

Backconnectors  21

Sideconnectors  21

16 Troubleshooting 22

TVpoweron/offissues  22

NoaccesstoPhilipsHospitalitysetupmenu 22

Pictureissues  22

17 Stand assembly 23

Contents

1 Notice 3

OSSdeclaration  3

2 Important 4

Productinformation  4

Safety  4

Screencareandsterilization  4

Environmentalcare  4

3 Your TV 5

Sidecontrolsandindicators  5

Theguestremotecontrol(optional)  6

ThePhilipsHospitalitysetupremotecontrol

(notincludedinbox)  7

4 SmartInstall Software 8

5 TV setup: access setup menu 8

6 Select a language 9

7 Select mode of communication 10

Selectthecommunicationprotocol  10

UseMultiRC  10

8 Automatically install channels 11

Selectavirtualorphysicalchannel  11

Selectachannelring  11

9 Congure the channels 11

Selectthemodeforsignalreception  11

Selectaprogram  11

Selectasourceofinput  12

Selectalogoforachannel  12

Maptoadigitalchannel  12

Assigndigitalmajorandminorchannels  12

Selectapreferredlistofchannels  12

Nameachannel  13

Muteachannel  13

10 View signal strength or congure content ratings,

closed caption and emergency alerts 13

Setupdigitalchannels  13

Congureclosedcaptiontext  13

Enableordisableemergencyalert  14

11 Congure the switch-on settings 14

Setthewelcomemessage  14

Presetthepictureformat  15

Selecttheswitch-onchannel  15

Selecttheswitch-onvolume  15

Enableordisablethevolumeindicator  15

Selectchanneldisplay  15

Selecttheswitch-onpowermode  15

Congurethepictureandsoundsettings  15

12 Congure the security settings 16

Selectthesecuritylevel  16

EnableordisabletheTVcontrols  16

En gl ish

IMPORTANT SAFETY INSTRUCTIONS

Read before operating equipment

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings. Install in accordance with

the manufacturers instructions.

8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including ampliﬁers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug.

A polarized plug has two blades with one wider than the other. A

grounding type plug has two blades and third grounding prong. The wide

blade or third prong are provided for your safety. When the provided

plug does not ﬁt into your outlet, consult an electrician for replacement

of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from the

apparatus.

11. Only use attachments/accessories speciﬁed by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table speciﬁed by

the manufacturer, or sold with the apparatus. When a cart is

used, use caution when moving the cart/apparatus combination

to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long

periods of time.

14. Refer all servicing to qualiﬁed service personnel. Servicing is required

when the apparatus has been damaged in any way, such as power-supply

cord or plug is damaged, liquid has been spilled or objects have fallen

into apparatus, the apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

15. This product may contain lead or mercury. Disposal of these materials

may be regulated due to environmental considerations. For disposal or

recycling information, please contact your local authorities or the

Electronic Industries Alliance:www.eiae.org.

16. Damage Requiring Service - The appliance should be serviced by

qualiﬁed service personnel when:

A. The power supply cord or the plug has been damaged; or

B. Objects have fallen, or liquid has been spilled into the appliance; or

C. The appliance has been exposed to rain; or

D. The appliance does not appear to operate normally or exhibits a

marked change in performance; or

E. The appliance has been dropped, or the enclosure damaged.

17. Tilt/Stability - All televisions must comply with recommended

international global safety standards for tilt and stability properties of its

cabinets design.

• Do not compromise these design standards by applying excessive pull

force to the front, or top, of the cabinet which could ultimately

overturn the product.

• Also,do not endanger yourself, or children, by placing electronic

equipment/toys on the top of the cabinet. Such items could

unsuspectingly fall from the top of the set and cause product damage

and/or personal injury.

18. Wall or Ceiling Mounting - The appliance should be mounted to a

wall or ceiling only as recommended by the manufacturer.

19. Power Lines - An outdoor antenna should be located away from

power lines.

20. Outdoor Antenna Grounding - If an outside antenna is connected to

the receiver, be sure the antenna system is grounded so as to provide

some protection against voltage surges and built up static charges.

Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984,

provides information with respect to proper grounding of the mats and

supporting structure grounding of the lead-in wire to an antenna-

discharge unit, size of grounding connectors, location of antenna-

discharge unit, connection to grounding electrodes and requirements for

the grounding electrode. See Figure below.

21. Objects and Liquid Entry - Care should be taken so that objects do

not fall and liquids are not spilled into the enclosure through openings.

a) Warning: To reduce the risk of ﬁre or electric shock, this apparatus

should not be exposed to rain or moisture and objects ﬁlled with

liquids, such as vases should not be placed on this apparatus.

22. Battery Usage CAUTION - To prevent battery leakage that may

result in bodily injury, property damage, or damage to the unit:

• Install all batteries correctly, with + and - alignment as marked on the

unit.

• Do not mix batteries (old and new or carbon and alkaline, etc.)

• Remove batteries when the unit is not used for a long time.

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE (NEC)

GROUND CLAMP

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT

(

NEC SECTION

810-20)

GROUNDING CONDUCTORS

(

NEC SECTION

810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(

NEC ART

250,

PART H

)

ELECTRIC SERVICE EQUIPMENT

Note to the CATV system installer: this reminder is provided to call the CATV system installer’s attention to Article 820-40 of

the NEC that provides guidelines for proper grounding and, in particular, speciﬁes that the cable ground shall be connected to the

roundin

stem of the buildin

, as close to the

oint of cable entr

ractical.



ManufacturedunderlicensefromDolbyLaboratories.‘Dolby’andthe

doubleDsymbol aretrademarksofDolbyLaboratories.

VESA,FDMIandtheVESAMountingCompliantlogoaretrademarksofthe

VideoElectronicsStandardsAssociation.

Pro:Idiom

isaregisteredtrademarkofZenithElectronicsLLC.

KensingtonandMicroSaverareregisteredUStrademarksofACCO

Worldcorporationwithissuedregistrationsandpendingapplicationsin

othercountriesthroughouttheworld.

Portionsofthissoftwarearecopyright©TheFreeTypeProject(www.

freetype.org).

OSS declaration

Open source software

Thistelevisioncontainsopensourcesoftware.PhilipsBUHospitalityhereby

offerstodeliverormakeavailable,uponrequest,forachargenomorethan

thecostofphysicallyperformingsourcedistribution,acompletemachine-

readablecopyofthecorrespondingsourcecodeonamediumcustomarily

usedforsoftwareinterchange.

Toobtainthesourcecode,writeto:

PhilipsSingaporePteLtd.

PhilipsBUHospitality

SoftwareDevelopmentManager

620ALorong1,ToaPayoh

Singapore319762

Thisofferisvalidforthreeyearsafterthedateofpurchaseofthisproduct.

1 Notice

2010

KoninklijkePhilipsElectronicsN.V.Allrightsreserved.

Specicationsaresubjecttochangewithoutnotice.Trademarksarethe

propertyofKoninklijkePhilipsElectronicsN.V.ortheirrespectiveowners.

Philipsreservestherighttochangeproductsatanytimewithoutbeing

obligedtoadjustearliersuppliesaccordingly.

Thematerialinthismanualisbelievedadequatefortheintendeduseofthe

system.Iftheproduct,oritsindividualmodulesorprocedures,areusedfor

purposesotherthanthosespeciedherein,conrmationoftheirvalidity

andsuitabilitymustbeobtained.Philipswarrantsthatthematerialitselfdoes

notinfringeanyUnitedStatespatents.Nofurtherwarrantyisexpressedor

implied.

Philipscannotbeheldresponsibleneitherforanyerrorsinthecontent

ofthisdocumentnorforanyproblemsasaresultofthecontentinthis

document.ErrorsreportedtoPhilipswillbeadaptedandpublishedonthe

Philipssupportwebsiteassoonaspossible.

Pixel characteristics

LCDproductscontainahighnumberofpixelsanditisnormaland

customarytohavealimitednumberofbrightordarkpixels.Thisisa

structuralpropertyofthedisplay(withincommonindustrystandardsand

specications)andisnotamalfunction.

Warranty

Nocomponentsareuserserviceable.Donotopenorremovecoversto

theinsideoftheproduct.RepairsmayonlybedonebyPhilipsService

Centresandofcialrepairshops.Failuretodososhallvoidanywarranty,

statedorimplied.

Anyoperationexpresslyprohibitedinthismanual,anyadjustments,or

assemblyproceduresnotrecommendedorauthorisedinthismanualshall

voidthewarranty.

Federal Communications Commission Notice

Thisequipmenthasbeentestedandfoundtocomplywiththelimitsfor

aClassBdigitaldevice,pursuanttopart15oftheFCCRules.Theselimits

aredesignedtoprovidereasonableprotectionagainstharmfulinterference

inaresidentialinstallation.Thisequipmentgenerates,uses,andcanradiate

radiofrequencyenergyand,ifnotinstalledandusedinaccordancewith

theinstructions,maycauseharmfulinterferencetoradiocommunications.

However,thereisnoguaranteethatinterferencewillnotoccurina

particularinstallation.Ifthisequipmentdoescauseharmfulinterference

toradioortelevisionreception,whichcanbedeterminedbyturning

theequipmentoffandon,theuserisencouragedtotrytocorrectthe

interferencebyoneormoreofthefollowingmeasures:

• Reorientorrelocatethereceivingantenna.

• Increasetheseparationbetweentheequipmentandthe

receiver.

• Connecttheequipmentintoanoutletonacircuitdifferent

fromthattowhichthereceiverisconnected.

• Consultthedealeroranexperiencedradioortelevision

technicianforhelp.

Modications

TheFCCrequirestheusertobenotiedthatanychangesormodications

madetothisdevicethatarenotexpresslyapprovedby<CompanyName_

Long>mayvoidtheuser’sauthoritytooperatetheequipment.

Cables

Connectionstothisdevicemustbemadewithshieldedcableswithmetallic

RFI/EMIconnectorhoodstomaintaincompliancewithFCCRulesand

Regulations.

Canadian notice

ThisClassBdigitalapparatusmeetsallrequirementsoftheCanadian

Interference-CausingEquipmentRegulations.

Allotherregisteredandunregisteredtrademarksarethepropertyoftheir

respectiveowners.

CLASS 1 WARNING

WARNING

THISTELEVISIONISCONSIDEREDTOBEADEVICEWITHCLASS

1CONSTRUCTION,ANDITMUSTBECONNECTEDTOAMAINS

SOCKETWITHAPROTECTIVEEARTHINGCONNECTION.

En gl ish

• Riskofinjurytochildren!Followtheseprecautionstoprevent

theTVfromtopplingoverandcausinginjurytochildren:

• NeverplacetheTVonasurfacecoveredbyaclothorother

materialthatcanbepulledaway.

• EnsurethatnopartoftheTVhangsovertheedgeofthe

surface.

• NeverplacetheTVontallfurniture(suchasabookcase)

withoutanchoringboththefurnitureandTVtothewallora

suitablesupport.

• Educatechildrenaboutthedangersofclimbingonfurnitureto

reachtheTV.

• Riskofoverheating!NeverinstalltheTVinaconnedspace.

Alwaysleaveaspaceofatleast4inchesor10cmaroundthe

TVforventilation.Ensurecurtainsorotherobjectsnevercover

theventilationslotsontheTV.

• RiskofdamagetotheTV!BeforeyouconnecttheTVtothe

poweroutlet,ensurethatthepowervoltagematchesthevalue

printedonthebackoftheTV.NeverconnecttheTVtothe

poweroutletifthevoltageisdifferent.

• Riskofinjury,reorpowercorddamage!NeverplacetheTV

oranyobjectsonthepowercord.

• ToeasilydisconnecttheTVpowercordfromthepoweroutlet,

ensurethatyouhavefullaccesstothepowercordatalltimes.

• Whenyoudisconnectthepowercord,alwayspulltheplug,

neverthecable.

• DisconnecttheTVfromthepoweroutletandantennabefore

lightningstorms.Duringlightningstorms,nevertouchanypart

oftheTV,powercordorantennacable.

• Riskofhearingdamage!Avoidusingearphonesorheadphones

athighvolumesorforprolongedperiodsoftime.

• IftheTVistransportedintemperaturesbelow5°C,unpack

theTVandwaituntiltheTVtemperaturematchesroom

temperaturebeforeconnectingtheTVtothepoweroutlet.

Screen care and sterilization

Avoidstationaryimagesasmuchaspossible.Stationaryimagesareimages

thatremainon-screenforextendedperiodsoftime.Examplesinclude:

on-screenmenus,blackbarsandtimedisplays.Ifyoumustusestationary

images,reducescreencontrastandbrightnesstoavoidscreendamage.

UnplugtheTVbeforecleaning.

• Useadamp(notwet)clothwithonlynon-aggressivecleaners

towipetheTV.Useanotherdamp(notwet)clothtoclean

offthecleaningagentresiduefromthesurfaceoftheTV.

Recommendedcleaningagentsinclude:

• Bleachsolution(10:90concentrationofbleachtowater).

• Denaturedalcohol(comprisingof80%-90%ethanol,10%-20%

methanol)

RiskofdamagetotheTVscreen!Nevertouch,push,ruborstrikethe

screenwithanyobject.

Toavoiddeformationsandcolorfading,wipeoffwaterdropsassoonas

possible.

Environmental care

Thepackagingofthisproductisintendedtoberecycled.Contactyourlocal

authoritiesforinformationabouthowtorecyclethepackaging.

End of life directives

2 Important

RegisteringyourmodelwithPhilipsmakesyoueligibleforallofthevaluable

benetslistedbelow,sodon’tmissout.

CompleteandreturnyourProductRegistrationCardatonce,orregister

onlineatwww.philips.com/welcometoensure:

• ProofofPurchase

Returningtheenclosedcardguaranteesthatyourdateof

purchaseisonle,sonoadditionalpaperworkisrequiredfrom

youtoobtainwarrantyservice.

• ProductSafetyNotication

Byregisteringyourproductyoureceivenotication-directly

fromthemanufacturer-intherarecaseofaproductrecallor

safetydefect.

• AdditionalBenetsofProductOwnership

Product information

ThisTVconsumesminimalenergyinstandbymodetominimize

environmentalimpact.Theactivepowerconsumptionisgivenonthetype

plateatthebackoftheTV.ThemodelandserialnumberofyourTVcanbe

foundontheTVaswellasonthepackaging.

Safety

• Riskofelectricshockorre!

• NeverexposetheTVtorainorwater.Neverplaceliquid

containers,suchasvases,neartheTV.Ifliquidsarespilton

orintotheTV,disconnecttheTVfromthepoweroutlet

immediately.ContactPhilipsConsumerCaretohavetheTV

checkedbeforeuse.

• NeverplacetheTV,remotecontrolorbatteriesnearnaked

amesorotherheatsources,includingdirectsunlight.

Topreventthespreadofre,keepcandlesorotherames

awayfromtheTV,remotecontrolandbatteriesatalltimes.

• Neverinsertobjectsintotheventilationslotsorotheropenings

ontheTV.

• WhentheTVisswiveledensurethatnostrainisexerted

onthepowercord.Strainonthepowercordcanloosen

connectionsandcausearcing.

• Riskofshortcircuitorre!

• Neverexposetheremotecontrolorbatteriestorain,wateror

excessiveheat.

• Avoidforcecomingontopowerplugs.Loosepowerplugscan

causearcingorre.

• RiskofinjuryordamagetotheTV!

• TwopeoplearerequiredtoliftandcarryaTVthatweighs

morethan55lbs.

• WhenstandmountingtheTV,useonlythesuppliedstand.

SecurethestandtotheTVtightly.PlacetheTVonaat,level

surfacethatcansupportthecombinedweightoftheTVand

thestand.

• WhenwallmountingtheTV,useonlyawallmountthat

cansupporttheweightoftheTV.Securethewallmount

toawallthatcansupportthecombinedweightoftheTV

andwallmount.KoninklijkePhilipsElectronicsN.V.bears

noresponsibilityforimproperwallmountingthatresultsin

accident,injuryordamage.

3 Your TV

Congratulationsonyourpurchase,andwelcometoPhilips!

Side controls and indicators

a POWER:Switchestheproductonoroff.Theproductisnot

poweredoffcompletelyunlessitisphysicallyunplugged.

b P/CH +/- :Switchestothenextorpreviouschannel.

c SOURCE:Selectsconnecteddevices.

d VOLUME +/- :Increasesordecreasesvolume.

These televisions are shipped in accordance with Energy Star

settings and as such the side buttons will not function in the

default settings. To enable these buttons refer to section on

LOW POWER STANDBY (see ‘Congure the SmartFeatures’

on page 17).

Thissetcontainsalampwithmercury;pleasedisposeofaccordingtoall

local,stateandfederallaws.

Philipspaysalotofattentiontoproduceenvironment-friendlyproducts

ingreenfocalareas.YournewTVcontainsmaterialswhichcanberecycled

andreused.Attheendofitslife,specializedcompaniescandismantlethe

discardedTVtoconcentratethereusablematerialsandtominimizethe

amountofmaterialstobedisposedof.Pleaseensureyoudisposeofyour

oldTVaccordingtolocalregulations.

Disposal of used batteries

Thebatteriessupplieddonotcontaintheheavymetalsmercuryand

cadmium.Nevertheless,inmanyareasbatteriesmaynotbedisposedofwith

yourhouseholdwaste.Pleaseensureyoudisposeofbatteriesaccordingto

localregulations.

En gl ish

Selectsachannelorsetting.

m FORMAT

Selectsapictureformat.

n A/CH

Togglesbetweenthecurrentchannelandthelastviewedchannel.

o VOL +/-

Increasesordecreasesvolume.

p MENU

Togglesthemainmenuonoroff.

q SMART SOUND

Launchesthesoundmenu.

r (STOP)*

Stopsplayback.

s (PAUSE)*

Pausesplay.

t CC

Displaysclosedcaptionssettings.

u SOURCE

Selectsconnecteddevices.

*ThisremotecontrolisauniedDVDremotecontrol,nota

universalremotecontrol,andassuchthesebuttonsareforusewith

PhilipsDVDplayersonly,

The guest remote control (optional)

a (Standby-On)

Switchestheproductonoroff.Theproductisnotpoweredoff

completelyunlessitisphysicallyunplugged.

b CH GUIDE

AccessesSmartGuide(see‘Congurethecontroloptions’onpage

16),and/orlistofchannels.

c PLAY*

Startsorresumesplay.

d REW*

Searchesbackward.

e FF*

Searchesforward.

f SMART PICTURE

Launchesthepicturemenu.

g SLEEP

SetsadelayafterwhichtheTVswitchestostandby.

h OK

Conrmsanentryorselection.

i Navigation buttons

Navigatesmenus.

j CH +/-

Switchestothenextorpreviouschannel.

Mutesorrestoresvolume.

l 0-9 (Numeric buttons)

h CH +/-

Switchestothenextorpreviouschannel.

Mutesorrestoresvolume.

j Miscellaneous buttons (Only E and A/V buttons are used.)

Econrmsanentryorselection.

A/Vdisplaysthesourcelist.

k VOL +/-

Increasesordecreasesvolume.

l M

AccessesthePhilipsHospitalitysetupmenu.

m RESET

Notused.

n GUEST/ DCM/ SETUP

GUEST-Functionsasaguestremotecontrol.

DCM-Notused.

SETUP-AllowsaccesstothePhilipsHospitalitysetupmenu.

o CC

Selectstasksoroptions.

p TEXT

Togglesteletextonoroff.

q RECALL

AccessestheCustomerServiceMenu(CSM).

The Philips Hospitality setup remote control

(not included in box)

a (Standby-On)

Switchestheproductonoroff.Theproductisnotpoweredoff

completelyunlessitisphysicallyunplugged.

b SLEEP

SetsadelayafterwhichtheTVswitchestostandby.

c SMART

Launchesthepicturemenu.

d 0-9 (Numeric buttons)

Selectsachannelorsetting.

e CH GUIDE

Displaysthelistofchannels.

f A/CH

Togglesbetweenthecurrentchannelandthelastviewedchannel.

g Navigation buttons

Navigatesmenus.

POWER

SLEEP

GUIDE

CLOCK A / V

SMART

GUEST

DCM

SETUP

TEXT

RECALL

HCLOV

RESET

E F G

4 5 6

2 3

A/CH

_ _

DB CA

En gl ish

5 TV setup: access setup menu

PressMonaPhilipssetupremotecontrolwiththeslidersettoSETUP or

enter3-1-9-7-5-3followedby MUTE(allwithin10seconds)ontheguest

remotecontrol.

WhenthesecuritylevelisHIGH,youmustusethePhilipssetupremote

controltoaccessthePhilipsHospitalitysetupmenu(see‘Selectthesecurity

level’onpage16).

TonavigatethroughthePhilipsHospitalitysetupmenu,

1 Press ontheremotecontroltoselectamenu.

2 Press tocongureormodifythesettingsoftheselectedfunction.

3 PressMonthePhilipssetupremotecontrolorMENUontheguest

remotecontroltoreturntothepreviousmenu.

Access the Philips Hospitality setup menu with guest remote

control

1 SwitchontheTVandselectaTVchannel.

2 Press3-1-9-7-5-3followedby Mutewithin10seconds.

» ThePhilipsHospitalitysetupmenuisdisplayed.

COMMUNICATION >

AUTO INSTALL TV

USE CHANNEL TABLE

YES

CURRENT RING

DIGITAL SETUP

SETUP

CABLE TUNING YES

CHANNEL INSTALL

CONFIGURATION

SMARTCLONE

RING2

LANGUAGE

ENGLISH

4 SmartInstall Software

PhilipsTVcanbecompletelycongurequicklyandeasilyusingPhilips

SmartInstallsoftware,availablefreeofchargefromyoursalesrepresentative

orfromourwebsitewww.philips.com/hospitality.Werecommend

recommendthismethodforthequickestsetup.

6 Select a language

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectalanguage.

» Thesetupandguestmenuswillnowbedisplayedintheselected

language.

Note

• YoucanchooseEnglish,EspañolorFrançaisasyourpreferredlanguage.

Access the Philips Hospitality setup menu with Philips setup

remote control

1 SwitchontheTVandselectaTVchannel.

2 SettheswitchatthesideoftheremotecontroltoSETUP.

3 PressMtodisplaythePhilipsHospitalitysetupmenu.

» ThePhilipsHospitalitysetupmenuisdisplayed.

POWER

SLEEP

GUIDE

SMART

GUEST

DCM

SETUP

TEXT

RECALL

RESET

4 5 6

2 3

A/CH

SETUP

En gl ish

Inthisway,eachTVrespondstoonlyoneRCthatissettothesamecolor

astheTVitself.Thispreventsinterferencefromeachother’sremotecontrol

whenyouwatchmultipleTVsinaroom.

Note

• MultiRCsupportsamaximumoffourTVsinoneroomandrequiresthe

useofspecialremotecontrols.Formoredetails,contactyourlocalPhilips

hospitalityrepresentative.

Set the TV to a particular RC

1 Press toselectCOMMUNICATION > MULTI RC.

2 Press toselectREMOTE COLOR.

3 Press totogglethroughthefourcolorsandselectone.

4 Press toselectSTORE.

» TheTVisconguredtorespondtotheRCthatissettothesame

color.

5 PressMENUandthecolorbutton(samecolorasabove)onthe

guestRCsimultaneously.

» TheguestRCissettotheselectedcolor.

6 PressOKforvesecondswhilepointingtotheTV.

» TheTVdisplaystheRCcolorandtheTVcoloronthescreen.If

theydonotmatch,programtheTVandtheRCagain.

7 Select mode of communication

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectCOMMUNICATION.

3 Press toselectoneofthefollowingoptions:

• COMMUNICATION:Toselectthecommunicationprotocol

betweentheTVandtheexternaldeviceconnectedtotheTV.

• STORE:Tostorethesettingsthataremodiedusingthe

COMMUNICATIONmenu.

• PENDANT:Toenableordisablethehealthcare

pendantcontrol.Thisisavailableonlywhenyouselect

COMMUNICATION > OFF.

Select the communication protocol

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectCOMMUNICATION > COMMUNICATION.

3 Press toselectthecommunicationprotocolbetweentheTV

andtheset-topbox:

• SP-SPI:Mostcommonlyusedconnection.

• SP-I2C:Whentheset-topboxsupportsthisprotocol.When

SP-SPIorSP-I2C areselected,therearesubmenuitemsfor

DCM TYPEandCP.

• SERIAL XPRESS:Whentheset-topboxsupportsthisprotocol.

WhenSERIAL XPRESSisselected,thespeedmustbeset.

• MULTI RC:TouseMultiRC.Seenextsection.

• SMART RC:ToaccessPayTVchannelsusingSmoovieremote

control.

• OFF:ToturnoffthecommunicationbetweentheTVandthe

set-topbox.

4 Press toselectStore.

Note

• ForSP-SPIandSP-I2Cconnections,iftheset-topboxrequiresasource

switch,selectDCM TYPE>GENERIC.

UseMultiRC

MultiRCenablescontrolofmultipleTVsinaroomwithoutanyinterference

fromeachother’sremotecontrol.

ToenableMultiRC,eachremotecontrolissettooneofthefourcolors-

blue,green,yelloworred.EachTVintheroomisseparatelyprogrammedto

aremotecontrolofoneofthosecolors.

STORE >

COMMUNICATION

OFF

9 Configure the channels

Whattheguestortheuseractuallyaccessareprogramnumbers.TheTV

hasprogramnumbers1-250available.Anychannel,orexternalinput,

analogordigitalcanbemappedtoanyprogramnumber,givingthehotel

completeexibilityofchannelmapping.Forexample,localchannelscould

bemappedtoprograms1-9;Newschannelscouldbemappedtothe

teens,Sportschannelstothe20setc.

Select the mode for signal reception

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectCABLE TUNING.

3 Press toselectoneofthefollowing:

• YES:ToreceiveTVsignalsfromacable.

• NO:ToreceiveTVsignalsfromanantenna.

Note

• ThisoptionisavailableonlywhenyouselectCHANNEL INSTALL>

CHANNEL>INPUT>TUNER.

Thissectionexplainshowtoassignprogramnumberstobethesameasthe

programnumbersthattheguestcanassessontheremotecontrol.

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectCHANNEL INSTALL.

3 Press tocongurethechannelsettings.

4 PressMonthePhilipssetupremotecontrolorMENUontheguest

remotecontroltoreturntothemainmenu.

Select a program

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectCHANNEL INSTALL>CHANNEL.

3 Press0-9(Numeric buttons)toenteraprogramnumber.

• Forcablemode,selectanumberbetween01-250.

• Forantennamode,selectanumberbetween02-250.

Note

• Toselectathreedigitprogramnumber,conguretheTVusingthe

controloptions.

INPUT TUNER

DIGITAL

RINGS

LABEL

( )

MUTE NONE

CHANNEL INSTALL

RF CHANNEL NUMBER

CHANNEL LOGO

CHANNEL

TV 2

8 Automatically install channels

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectCABLE TUNING.

3 Press toselectoneofthefollowing:

• YES:ToreceiveTVsignalsfromacable.

• NO:ToreceiveTVsignalsfromanantenna.

4 Press toselectAUTO INSTALL TV>START.

5 Press tostarttheautomaticinstallationofchannels.

6 Pressanykeyontheremotecontroltostoptheautomatic

installationofchannels.

Note

• ThisoptionisavailableonlywhenyouselectCHANNEL INSTALL>

CHANNEL>INPUT>TUNER.

Select a virtual or physical channel

ItisalwaysrecommendedphysicalchannelsbysettingUSE CHANNEL

TABLEtoNO.

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectUSE CHANNEL TABLE.

Note

• ThisoptionisavailableonlywhenyouselectCHANNEL INSTALL>

CHANNEL>INPUT>TUNER.

Select a channel ring

ChannelsareorganizedinringsinPhilipscommercialtelevisions.Tomake

thechannelsvisibletotheguest,theymustbeassignedtothesameringthat

thetelevisionissettodisplayasthecurrentring.

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectCURRENT RING.

3 Press toselectalistofchannelstowatch.

Note

• IfyouselectCOMMUNICATION>SMART RC, RING4 isnotavailable

(see‘Selectthecommunicationprotocol’onpage10).

COMMUNICATION >

AUTO INSTALL TV

CURRENT RING

DIGITAL SETUP

SETUP

CABLE TUNING YES

CHANNEL INSTALL

CONFIGURATION

SMARTCLONE

RING2

LANGUAGE

ENGLISH

USE CHANNEL TABLE NO

En gl ish

Assign digital major and minor channels

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectCHANNEL INSTALL>DIGITAL>YES.

3 Press toselectDIGITAL MAJOR CHANNEL/RF CHANNEL

NUMBER.

4 Press0-9(Numeric buttons)toenterachannelnumberbetween1

and999.

5 Press toselectDIGITAL MINOR CHANNEL/MPEG PROGRAM

NUMBER.

6 Press0-9(Numeric buttons)toenterachannelnumberbetween0

and32768.

Select a preferred list of channels

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectCHANNEL INSTALL>RINGS.

3 Press toselectaringnumber.

» Aashingreddashappearsnexttotheselectedring.

4 Press toselectordeselectalist.

» Theselectedlistismarkedbyan“X”.

CHANNEL TV 2

INPUT TUNER

RINGS

LABEL

( )

MUTE

NONE

CHANNEL INSTALL

DIGITAL CH SCROLL

RF CHANNEL NUMBER

MPEG PROGRAM NUMBER

CHANNEL LOGO

DIGITAL

YES

CHANNEL TV 2

INPUT TUNER

LABEL

( )

MUTE

NONE

CHANNEL INSTALL

DIGITAL CH SCROLL

CHANNEL LOGO

RF CHANNEL NUMBER

MPEG PROGRAM NUMBER

DIGITAL

YES

RINGS

Select a source of input

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectCHANNEL INSTALL>INPUT.

3 Press toselectasourceofinput.

Note

• Externalinputscanalsobeassignedtoaprogramnumber.

Select a logo for a channel

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectCHANNEL INSTALL>CHANNEL LOGO.

3 Press toenterapagecontaininglogos.

4 Press toselectalogoforthechannel.

5 Press“0”tosavethelogoandexitthemenu.

Map to a digital channel

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectCHANNEL INSTALL>DIGITAL.

3 Press toselectYES.

4 Press toselectDIGITAL CH SCROLL.

» Digitalchannelscrollworksonlyfordigitalchannelsthathave

alreadybeeninstallediebyAutomaticchannelinstall-seesection

5 Press totogglebetweentheavailabledigitalchannels.

Note

• SelectCHANNEL INSTALL>DIGITAL > NO,ifthechannelisananalog

channel.

• DIGITAL CH SCROLL, DIGITAL MAJOR CH,andDIGITAL MINOR

CHdonotapplytoanalogchannels.

• WhenyouselectUSE CHANNEL TABLE>NO tousephysicalchannel

numbersinsteadofvirtualchannelnumbers,DIGITAL MAJOR CHis

replacedbyRF CHANNEL NUMBERandDIGITAL MINOR CHis

replacedbyMPEG PROGRAM NUMBER onyourTVscreen.

CHANNEL TV 2

INPUT TUNER

RINGS

LABEL

( )

MUTE

NONE

CHANNEL INSTALL

DIGITAL CH SCROLL

RF CHANNEL NUMBER

MPEG PROGRAM NUMBER

CHANNEL LOGO

DIGITAL

YES

10 View signal strength or configure

content ratings, closed caption

and emergency alerts

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectDIGITAL SETUP.

» Digitalsetupmenuisdisplayedonyourscreen.Youcancongure

thecontentratings,closedcaptionandemergencyalertsettings.

SIGNAL STRENGTHdisplaysthesignalstrengthoftheselected

channelinpercentage.

Note

• Philipsrecommendsasignalstrengthof80%orhigher.Ifyouseeavalue

belowthislevelyoumayexperiencesignaldropoutissues,pixelization,

picturefreezeetc.Toaddresslowsignalstrength,youshouldcontact

yourinstaller.

Setup digital channels

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectDIGITAL SETUP>CHANNEL SETUP.

Selectoneofthefollowingoptions:

• V-CHIP DIGITAL RATING:Toenableordisablethecontent

ratingsformovies,TVprogramsanddataaspertheVCHIP

standard.Formoreinformation,visitwww.fcc.gov/vchip.

• CLEAR ALL RATINGS:Toclearalltheratings.

• US MOVIE RATING:Toenableordisablethemovieratings.

• US TV RATING:ToenableordisabletheTVratings.

• D. RATING:Tocongurethedownloadable(RRT-5)rating.

• FACTORY CH RESET:Toclearthedigitalchannelmap.

Note

• IfyouselectFACTORY CH RESET, youneedtore-installthechannels.

Congure closed caption text

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectDIGITAL SETUP>DIGITAL CC SETUP >

CAPTION TEXT.

3 Press toselectandcongureoptionssuchasCAPTION

SIZE,CAPTION STYLE,TEXT COLOR,BG COLOR,etc.

EMERGENCY ALERT ALWAYS

SIGNAL STRENGTH 63%

DIGITAL SETUP

DIGITAL CC SETUP

CHANNEL SETUP

5 Press tosaveorremoveachannelfromthering.

» Theringismarkedbyan‘X’whenthechannelissavedinit.

6 Press toselectacategoryoption(HIGH DEFINITION,

SPORTS,NEWS,etc)tosavethechannel.

7 Press toselectYES tosavethechanneltothiscategoryorNO

toremovethechannel.

Name a channel

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectCHANNEL INSTALL>LABEL.

3 Press toselectaslottoenteracharacter.

» Aashingredmarkunderlinestheselectedslot.

4 Press toselectacharacter.

5 Repeatsteps3and4untilyounishnamingthechannel.

Mute a channel

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectCHANNEL INSTALL>MUTE.

3 Press toselectoneofthefollowing:

• AUDIO:Tomutetheaudiointhechannel.

• VIDEO:Tomutethevideointhechannel.

• NONE:Toenableaudioandvideointhechannel.

HIGH DEFINITION

RINGS

SPORTS

NEWS

YES

KIDS

YES

MOVIES

YES

NETWORK

YES

EDUCATION

YES

LIFESTYLE

YES

HOSPITAL

YES

CHANNEL RINGS

(1X)(2 )(3 )(4 )

CHANNEL TV 2

INPUT TUNER

MUTE

NONE

CHANNEL INSTALL

DIGITAL CH SCROLL

CHANNEL LOGO

DIGITAL MAJOR CH

DIGITAL MINOR CH

DIGITAL

YES

RINGS

LABEL

( )

___ _ _CNN

En gl ish

11 Configure the switch-on settings

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectCONFIGURATION > SWITCH ON / OSD.

3 Press toselectoneoftheavailableoptions:

• WELCOME MESSAGE:Tosetorclearawelcomemessage.

• SWITCH ON CHANNEL:Toselectachannelthatisdisplayed

whentheTVisturnedon.SWITCH ON CHANNELmustbe

installedandintheactivechannelring.OtherwiseLockedwill

bedisplayed.

• SWITCH ON SMARTGUIDE:WhensettoYes theSmart

guidewillbedisplayedwhenevertheTVispoweredon.

• SWITCH ON VOLUME:Tosetthevolumethatisusedeach

timetheTVisturnedon.

• SWITCH ON PIC FMT:Tocongurethepictureformatthatis

usedfordisplaywhentheTVisturnedon.

• POWER ON:Tocongurethepowerconditionthatwillbe

restoredafteranACpowerinterruption.

• VOLUME INDICATOR:Toenableordisablethedisplayof

volumeindicator.

• CHANNEL DISPLAY:Toenableordisablethedisplayof

channelnumberandchannelnameonthescreen.

Set the welcome message

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectCONFIGURATION > SWITCH ON / OSD >

WELCOME MESSAGE.

3 Press toselectoneofthefollowingoptions:

• DISPLAY:SelectYEStodisplaythewelcomemessage.Select

NOtopreventthedisplayofthewelcomemessage.

• LINE 1:Toentertherstlineofwelcomemessage.Press 

toselectacharacterslotand toselectanalphanumeric

character.

• LINE 2:Toenterthesecondlineofwelcomemessage.Press

toselectacharacterslotand toselectanalphanumeric

character.

• CLEAR:Toclearthewelcomemessage.

Note

• Youcanhaveamaximumof20alphanumericcharactersineachlineof

yourwelcomemessage.

SWITCH ON CHANNEL TV 2

SWITCH ON PIC FMT

WIDESCREEN

POWER ON

VOLUME INDICATOR

SWITCH ON VOLUME

WELCOME MESSAGE

LAST STATUS

YES

SWITCH ON SMARTGUIDE

YES

SWITCH ON / OSD

CHANNEL DISPLAY

ALL

Enable or disable emergency alert

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectDIGITAL SETUP>EMERGENCY ALERT.

3 Press toselectoneofthefollowingoptions:

• ALWAYS:Toenableemergencyalertsatalltimes.

• SKIP LOW PRIORITY:Toskiptheemergencyalertsoflow

priority.

• SKIP MEDIUM LOW PRIORITY:Toskiptheemergencyalerts

ofmediumandlowpriorities.

Note

• Emergencyalertsofhighprioritycannotbedisabledforsafetyreasons.

Congure the picture and sound settings

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectCONFIGURATION > PICTURE / SOUND.

3 Press toselectoneofthefollowingoptions:

• BRIGHTNESS:Toadjusttheblackleveloftheimage.

• COLOR:Toadjustthecolor.

• CONTRAST:Toadjustthepeakbrightareasoftheimage.

• SHARPNESS:Toadjusttheimagesharpness.

• TINT:Toadjustthecolorbalanceinanimage.

• ACTIVE CONTROL:SelectON tone-tunethereceived

signalsaccordingtothelightingconditionsoftheroom.

• TREBLE:Toadjustthetreblelevel.

• BASS:Toadjustthebasslevel.

• BALANCE:Toadjustthebalanceofthespeakers.

• AVL:SelectON toreducetheuctuationsinvolumewhenthe

commercialsareairedorwhenyouswitchchannels.Otherwise,

selectOFF.

COLOR 38

SHARPNESS

TINT

ACTIVE CONTROL

PICTURE / SOUND

CONTRAST

BRIGHTNESS

YES

TREBLE

BASS

BALANCE

AVL

Preset the picture format

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectCONFIGURATION > SWITCH ON / OSD >

SWITCH ON PIC FMT.

3 Press toselectoneoftheavailablepictureformats:

» Theselectedpictureformatisusedtodisplaypictureswhenthe

TVisturnedon.

Select the switch-on channel

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectCONFIGURATION > SWITCH ON / OSD >

SWITCH ON CHANNEL.

3 Press todisplaytheselectedchannelwhentheTVisturnedon.

Select the switch-on volume

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectCONFIGURATION > SWITCH ON / OSD >

SWITCH ON VOLUME.

3 Press tosetavolumethatisusedeachtimetheTVisturnedon.

Enable or disable the volume indicator

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectCONFIGURATION > SWITCH ON / OSD >

VOLUME INDICATOR.

3 Press toselectoneofthefollowing:

• YES:Todisplaythevolumeindicator.

• NO:Tohidethevolumeindicator.

Select channel display

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectCONFIGURATION > SWITCH ON / OSD >

CHANNEL DISPLAY.

3 Press toselectoneofthefollowing:

• NUMBER:Todisplaythechannelnumberonthescreen.

• LABEL:Todisplaythechannelnameonthescreen.

• ALL:Todisplaychannelnumber,nameandlogoonthescreen.

• NONE:Topreventthedisplayofchannelinformation.

Select the switch-on power mode

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectCONFIGURATION > SWITCH ON / OSD >

POWER ON.

3 Press toselectthepowermodethatwillberestoredafteranAC

powerinterruption.

• LAST STATUS:WhenACpowerisrestored,thiswillreturn

theTVtothesamepowerstatusthatitwasinwhenACpower

wasremoved.

• ON:WhenACpowerisrestored,theTVwillalwayscome

upinthe“on”state.The buttonontheTVandtheguest

remotecontrolareenabled.

• STANDBY:WhenACpowerisrestored,theTVwillalways

comeupinthe“Standby”state.

• FORCED ON:WhenACpowerisrestored,theTVwillalways

comeupinthe“on”state.The buttonontheTVandthe

guestremotecontrolaredisabled(TheTVcannotbeturned

off.)

En gl ish

Enable standalone mode (Decryption control)

ThepremiumHDcontentreceivedbyasatelliteorcableisencrypted,

usingadigitalrightsmanagementsystem(DRM)calledPro:Idiom®,toavoid

piracy.ThetechnologyisembeddedintheTVandpreventsguestsfrom

piratingthecontent.

Todecryptthecontent,followthefollowingsteps:

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectCONFIGURATION > SECURITY >

DECRYPTION CONTROL.

3 Press toselectoneofthefollowingsettings:

• PASSWORD:Toenterthepassword.

• CONVERT:Todecrypttheencrypteddigitalsignalreceived

fromasatelliteorPay-Per-Viewservice.

Note

• Ifthepasswordisenteredincorrectlyntimes,theconvertlinewillshow

“LOCKED”.ThiscanbeclearedbyunpluggingandrepluggingtheAC

powertotheTV.

• TheotheroptionsinDECRYPTION CONTROLmenuaredisplayedonly

foryourinformationandcannotbemodied.

• Fordetailedinstructionsondecryptioncontrol,refertothePro:Idiom®

certicate.

Congure the control options

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectCONFIGURATION > CONTROL.

SERIAL # SV1A07071000012

DECRYPTION CONTROL

CURRENT MODE

PPV

MODEL # 32HF5860D/27

CONVERT

PASSWORD

_ _ _ __ _ _ _

STANDALONE

DIGIT TIMEOUT 3.0

SOURCE MENU ITEM

PIC FMT MENU ITEM

SMART WINDOW MENU ITEM

CONTROL

3 DIGIT ENTRY

ESP

OFF

LODGENET CARD

SMART GUIDE

MIN VOLUME

MAX VOLUME

12 Configure the security settings

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectCONFIGURATION > SECURITY.

3 Press toselectoneofthefollowing:

• SECURITY:Tospecifythesecuritylevel.

• KEYBOARD LOCK:ToenableordisablelocalTVcontrols.

• REMOTE CONTROL LOCK:Toenableordisabletheguest

remotecontrolkeys.

• DECRYPTION CONTROL:ToconverttheTVfromPay-Per-

Viewmodetostandaloneprotectedmode.

Select the security level

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectCONFIGURATION > SECURITY > SECURITY.

3 Press toselectoneofthefollowingsettings:

• STANDARD:ToaccessthePhilipsHospitalitysetupmenu

usingtheguestremotecontrolorthePhilipsHospitalitysetup

remotecontrol.

• HIGH:ToaccessthePhilipsHospitalitysetupmenuusingthe

PhilipsHospitalityremotecontrolonly.

Enable or disable the TV controls

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectCONFIGURATION > SECURITY >

KEYBOARD LOCK.

3 Press toselectoneofthefollowingsettings:

• ALL:TolockallcontrolkeysontheTVincludingthe key.

• YES:TolockallcontrolkeysontheTVexcludingthe key.

• NO:TounlockallcontrolkeysontheTV.

Enable or disable the remote control

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectCONFIGURATION > SECURITY > REMOTE

CONTROL LOCK.

3 Press toselectoneofthefollowingsettings:

• NO:Toenableallstandardremotecontrolfunctions.

• YES:Todisableallstandardremotecontrolfunctions.

KEYBOARD LOCK NO

DECRYPTION CONTROL

SECURITY

REMOTE CONTROL LOCK

SECURITY STANDARD

13 Configure different settings

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectCONFIGURATION.

3 Press toselectoneoftheavailableoptionstocongurethe

settings:

• SWITCH ON / OSD:Toconguresettingssuchasvolume,

channel,pictureformat,powermode,etcthatareusedas

defaultwhentheTVisswitchedon.

• PICTURE / SOUND:Tocongurepictureandsoundsettings

suchasbrightness,color,sharpness,tint,bass,balance,AVL,etc.

• SECURITY:Tosetthelevelofsecurity.Toenablekeyboardand

RClock,Pro:IdiomdecryptionandSmartSecure.

• CONTROL:Toconguresettingsforchannels,minimumand

maximumvolume,ESP,etc.

• SMARTFEATURES:ToconguretheSmartPower,USB

break-in,SmartGuideCategory,SmartUpdate,andsoftware

downloadsettings.

• AUDIO FEATURES:Tocongurethecorrectaudiosource.

• CC/ V-CHIP:TocongureclosedcaptionandV-Chipsettings.

• HOTEL INFORMATION:Tocongurethehotelinformation

includinghotelnameandroomnumber(requiredinformation

whenSmartSecureisenabled).

Congure the SmartFeatures

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectCONFIGURATION > SMARTFEATURES.

PICTURE / SOUND >

CONTROL

SMARTFEATURES

AUDIO FEATURES

CONFIGURATION

SECURITY

SWITCH ON / OSD

CC / V-CHIP

HOTEL INFORMATION

HDMI CEC

LOW POWER STANDBY

SMARTFEATURES

SMARTPOWER

OFF

SMARTCP

YES

USB BREAK-IN

SW DOWNLOAD

SMARTUPDATE

YES

SMARTUPDATE CHANNEL

SMARTGUIDE CATEGORIES

SMARTSECURE

3 Press toselectoneofthefollowingoptions:

• ESP (Energy saving programmability):Setatimefrom1-99

hourstoenableESP.IftheTVdoesnotreceiveanycommand

forthistimeperiod,itentersthestandbymodetosaveenergy.

SelectOFFtodisableESP.

• DIGIT TIMEOUT:Setatimebetween1-9.9seconds.When

youpressakeyonyourRC,theTVwillwaitforthespecied

timebeforeassumingthatyouarenishedenteringdigits,and

switchingtotheenteredchannel.Thedefaulttimeisthree

seconds.Ifyouwanttokeyintwo-digitorthree-digitchannel

numbers,donotselectthetimetobetooshort.

• 3 DIGIT ENTRY:SelectYEStoenabletheselectionofthree

digitchannelnumber(channelnumbers1-250forcable

modeand2-250forantennamode).SelectNOtoenablethe

selectionofonlytwo-digitchannelnumbers(channelnumbers

1-99forcablemodeand2-99forantennamode).

• SOURCE MENU ITEM:SelectYEStoallowtheguesttoselect

asourcefromtheguestmenuusingtheguestRC.Otherwise,

selectNO.

• PIC FMT MENU ITEM: SelectYEStoallowtheguesttoselect

apictureformatfromtheguestmenuusingusingtheguestRC.

Otherwise,selectNO.

• SMART WINDOW MENU ITEM:SelectYEStoallow

thegueststowatchinputsfromaPCandanRFchannel

simultaneously,onasplitscreen.Otherwise,selectNO.

• SMART GUIDE:SelectYEStodisplaytheon-screenchannel

guide.ThechannelguideisnotusedwithPay-Per-Viewsystems

andshouldbesettoNO.

• MIN VOLUME:Settheminimumvolume.

• MAX VOLUME:Setthemaximumvolume.

• LODGENET CARD:SelectYEStoallowtheuseofLodgenet.

Note

• TheSMART GUIDEwillshowonlythoseprogramsthathavebeen

assignedtoone(ormore)categories.

En gl ish

3 Press toselectoneofthefollowingoptions:

• SOURCE:SelectRFasthesourceforsoftwaredownload.

• DIRECTION:SelectDOWNLOADtodownloadthesoftware

fromtheRFchannel.

• CABLE TUNING:SelectYEStousechannels1-135for

softwareupdate.SelectNOtousechannels2-69forsoftware

update.YoumustselectcabletuningasYESforusewithPSG.

• RF CHANNEL NUMBER:SelecttheRFchannelnumberfor

softwareupdate.

• SW TYPE:Selectoneofthefollowingtypesofsoftwarefor

download:

• SSB NVM:TodownloadSSBNVMsoftware.

• SSB FIRMWARE:TodownloadthemainTVsoftware.

 STANDBY FIRMWARE:TodownloadthemainTV 

 startupdata.

• IBOARD NVM:TodownloadtheTVsettings.

• IBOARD FIRMWARE:Toupdateiboardsoftware.

• ALL:Todownloadallthesoftwareupgrades.

• SW VERSION CHECK:SelectYEStocheckthesoftware

versionfordownload.Thiswilldownloadanewerversion.

• START:Tostartthesoftwaredownload.

» TheTVwillrestartautomaticallyuponthecompletionofsoftware

download.Therewillbemultipledownloadandrestartcycles

whendownloadALLisselected.

Note

• SoftwaredownloadfromanRFsourceisavailableinonlycertainmodels.

• TheSTANDBY FIRMWAREisrarelyupdatedandisnotincludedwhen

SW TYPE > ALLisselected.ToupdatetheSTANDBY FIRMWARE,the

SW TYPE > STANDBY FIRMWAREmustbeuniquelyselected.

Download software from a USB device

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectCONFIGURATION > SMARTFEATURES >

SW DOWNLOAD.

3 Press toselectoneofthefollowingoptions:

• SOURCE:SelectUSBasthesourceforsoftwaredownloador

upload.

• DIRECTION:SelectUSB TO TVtodownloadthesoftware

fromtheUSBdevice.SelectTV TO USBtouploadthe

softwaretotheUSBdevice.

• SW TYPE:Selectoneofthefollowingtouploadordownloada

particulartypeofsoftware.

• SSB NVM:TodownloadSSBNVMsoftware.

• SSB FIRMWARE:TodownloadthemainTVsoftware.

DIRECTION TV TO USB

START

SW DOWNLOAD

SW TYPE

IBOARD NVM

SOURCE

USB

3 Press toselectoneofthefollowingoptions:

• SMARTPOWER:Toenableordisablethepowersavingmode.

SelectHIGHformaximumpowersavings.

• LOW POWER STANDBY:Touseminimumpowerwhenthe

TVisinstandbymode.

• SMARTCP:SelectYEStoenabletheautosensingfeatureto

switchtosourcewhereavideosignalispluggedtoasideI/O.

SelectNOtodisabletheautosensingfeatureandtoyouhave

toselectthevideosourcemanually.

• SMARTSECURE:Seedetailsinthenotebelow.

• SMARTGUIDE CATEGORIES:Todeterminewhichfunction

iscalledontherstpressoftheCH guidebuttonandwhich

categorieswillbeavailable.

• USB BREAK-IN:SelectYEStoenabletheautomaticswitchover

totheUSBrootmenuwhenaUSBdeviceispluggedin.USB

Break-inallowsgueststoview.jpgimagesorlistento.mp3

musicles.SelectNOtodisableautomaticswitchover.

• SMARTUPDATE:SelectYEStoupdateinformationona

channel.AnoptionSMARTUPDATE CHANNELwillappear

belowonthescreentoenableyoutoselectachannelto

update.

• SW DOWNLOAD:Toenablesoftwaredownloadandcloning

throughaUSBdeviceoranRFchannel.Availableonlyincertain

models.SelectUSBorRFasthesourceofsoftwaredownload.

PhilipsUS-PSG-1000devicesupportsstreamingofsoftware

downloadsandSmartCloneupdateles.

Note

• IfLOW POWER STANDBYissettoYES,

• theTVcanonlybeswitchedonwitharemotecontrol.Pleaseensurethe

remotecontrolisalwaysavailable.Thecontrolbuttonsatthesideofthe

TVwillnotbeabletoswitchontheTV.

• IfLOW POWER STANDBYissettoYES,theTVwillbeconguredto

theoptimalenergysavingmodewhenevertheTVisswitchedtostandby

mode.Asaresult,theTVwilltakealittlelongertoswitchonagain.Ifyou

needafastswitchontime,selectNO.

• SMARTSECUREisafeatureinthenewrangeofcommercialTVsfrom

Philips.ThisfeaturerequiresaPhilipsSmartGateway(PSG)aspartof

theinstalledsystem.ThePSGmustbeconguredtobroadcastasecurity

key.Then,whenSMARTSECUREisenabledintheTV,theTVwillnot

operatefroma“coldstart”unlessitrst“sees”thissecuritykeybeing

broadcast.

Download software from an RF channel

1 EnterthePhilipsHospitalitysetupmenu.

2 Press toselectCONFIGURATION > SMARTFEATURES >

SW DOWNLOAD.

DIRECTION

SW DOWNLOAD

SOURCE

RF TO TV

CABLE TUNING

RF CHANNEL

YES

RF TO TV

Page is loading ...

Philips 26HFL5561L/27 User manual

Brand: Philips

Model: 26HFL5561L/27

Category: LCD TVs

Type: User manual

Download PDF

report

Philips 26HFL5561L/27 User manual

Philips 26HFL5561L/27 User manual

Related papers

Other documents