Motorola i95cl Supplementary Manual

Motorola iBoard

i95cl Support

Change-Out Instructions

@NNTN4315A@

NNTN4315A

i95cl Support.fm Page 1 Wednesday, May 22, 2002 11:13 AM

Detaching Support from iBoard

1. Slide the dock all the way out of the iBoard until

the rear support springs upward.

2. While holding the rear support, gently bend out

one of the wires until the support is free.

Attaching support to iBoard

Install desired support in manner opposite from Step 2

above.

NOTE: Ensure that the hinges face away from

the iBoard when installing.

IMPORTANT: Do not over bend the wire while

attempting to attach the support

to the iBoard.

i95cl Support.fm Page 2 Wednesday, May 22, 2002 11:13 AM