Placement Description Weight Height Width Depth
Attaches to the oor, between the seats
of most common vans and trucks
Complete Large Mobile Workstation
with Vertical Surface Mount
67 lbs 15.2” to 17.7” 15.0” 18.1”
Workstation Features:
• Heavy gauge steel construction for long-term durability
• Black powdercoat nish for maximum corrosion resistance
• Contains locking storage for supplies and devices
• Includes attachable convenient clipboard holder
• Larger handle to allow easy opening or closing of door
• Mounting holes on the front accommodates computer mounting brackets
• Box attaches separately to mounting legs which allows for easy installation and quick removal of the workstation
from the vehicle
• Attaches to leveling feet that will adjust to vehicle oor variations
• Can be used with MCS Vehicle Legs and either of the new MCS Top Plates (Item No. 7160-0085 or 7160-0086) for a
no drilling option)
Vertical Surface Mount Features:
• Heavy gauge steel construction for long-term durability
• Black powdercoat nish for maximum corrosion resistance
• Allows a computer to be mounted in front of the box without obstructing access to the storage compartment
• A computer can be mounted on top of the workstation by using a Motion Attachment (Item No. CLEVIS 0-90T),
any Upper Pole and any Gamber-Johnson Cradle or Docking Station
Item No. 7160-0105
W
D
H
3001 Borham Ave. | Stevens Point, WI 54481, USA
Phone: 715.344-3482 | Toll-free: 800.487-9220 | Fax: 715.344-5209
Email: [email protected] | Website: www.gamberjohnson.com
This document, including images, may not be reproduced partly or fully without the expressed written
consent of Gamber-Johnson’s Marketing Department. © Copyright 2012 Gamber-Johnson LLC
EXCEPTIONAL ENGINEERING | ROCK SOLID | EXTENSIVE TESTING
LARGE MOBILE WORKSTATION
LARGE MOBILE WORKSTATION
WITH VERTICAL SURFACE MOUNT
WITH VERTICAL SURFACE MOUNT
/
