Strong SRT 8102+ User manual

Brand: Strong

Model: SRT 8102+

Category: TV set-top boxes

Type: User manual

This manual is also suitable for

STR 8102 PLUS

Strong SRT 8102+ is a digital high definition terrestrial receiver that allows you to enjoy free-to-air broadcasts in stunning quality. With its HDMI and SCART connectivity, you can easily connect it to your TV and enjoy your favorite channels. The receiver also features a USB port, enabling you to record your favorite shows or play multimedia files from a USB storage device. Additionally, the time shift function allows you to pause and rewind live TV, so you never miss a moment of your favorite programs.

www.strong.tv

User manual

Digital High Deﬁ nition Terrestrial Receiver

SRT 8102+

Picture similar

PART 1 • English

English

TABLE OF CONTENTS

1.0 INTRODUCTION 2

1.1 Safety Instructions 2

1.2 Storage 2

1.3 Equipment Set-up 3

1.4 Accessories 3

1.5 Usage of external USB devices 3

2.0 YOUR RECEIVER 3

2.1 PIN-CODE DEFAULT: 0000 3

2.2 Front Panel 3

2.3 Rear Panel 4

2.4 Remote Control 4

3.0 CONNECTION 5

3.1 Connecting to a Terrestrial Antenna 5

3.2 Connecting to TV with HDMI cable 5

3.3 Connecting to TV with SCART cable 5

3.4 Connecting to a Digital Audio Ampliﬁer with S/PDIF 5

3.5 Connecting to a Digital Audio Ampliﬁer and TV using HDMI 5

3.6 Connecting a USB storage device 5

4.0 STARTING UP FOR THE FIRST TIME 6

5.0 QUICK GUIDE TO USING YOUR RECEIVER 7

6.0 OPERATION 7

6.1 Changing channels 7

6.2 Info Banner 8

6.3 Selection of audio language 8

6.4 Teletext 8

6.5 Subtitles 8

6.6 Time Shift 8

6.7 EPG (Electronic Programme Guide) 8

6.8 Instant Recording 9

7.0 MAIN MENU 9

7.1 Edit Channel 9

7.2 Installation 11

7.3 System Setup 12

7.4 Tools 14

7.5 Games 16

7.6 Media+ 16

8.0 TROUBLESHOOTING 18

9.0 TECHNICAL SPECIFICATIONS 19

STRONG declares that this item complies with the basic requirements and other relevant regulations

of directives 2004/108/EC and 73/23/EC, RoHS 2002/95/EC

Subject to alterations. In consequence of continuous research and development technical speciﬁcations, design and appearance of products may

change. All product names are trademarks or registered trademarks of their respective owners.

30 Aug 2012 12:33

PART 1 • English

1.0 INTRODUCTION

1.1 Safety Instructions

DO NOT INSTALL YOUR RECEIVER:

 In a closed or poorly ventilated cabinet; directly on top of or under any other

equipment; on a surface which might obstruct the ventilation slots.

DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES:

 To direct sunlight or any other equipment that generates heat; to rain or intense

moisture; to intense vibration and to any shock which may cause permanent damage

to your receiver or to any magnetic objects, such as loudspeakers, transformers, etc.

 Do not use a damaged power cord. It may cause a ﬁre or an electric shock. Do not

touch a power cord with wet hands. It may cause an electric shock.

 When the receiver is not used for a long period of time, you should unplug the power

cord from the wall socket.

 Do not use alcohol or ammonia based liquids to clean the receiver. If you wish, you

may clean your receiver with a soft lint-free cloth slightly made damp with a mild soap

solution, and only after disconnecting from the mains voltage supply. Make sure no

foreign objects fall through the ventilation slots because this could cause ﬁre or an

electric shock.

 Do not place any objects on top of the receiver because this might prevent proper

cooling of the components inside.

Safety Precautions

 Never try to open the receiver. It is dangerous to touch the inside of the receiver due to high

voltages and possible electrical hazards. Opening the receiver will void the warranty of the

product. Refer all maintenance or servicing to suitably qualiﬁed personnel.

 When you are connecting cables, be sure that the receiver is disconnected from the

mains supply voltage. Wait a few seconds after switching off the receiver before you

move the receiver or disconnect any equipment.

 It is a necessity that you only use an approved extension and compatible wiring that

is suitable for the electrical power consumption of the installed equipment. Please

ensure that the electrical power supply corresponds with the voltage on the electrical

identiﬁcation plate at the back of the receiver.

If the receiver does not operate normally even after strictly following the instructions in this user

manual, it is recommended to consult your dealer.

1.2 Storage

Your receiver and its accessories are stored and delivered in a packaging designed to protect against

electric shocks and moisture. When unpacking it, make sure that all the parts are included and keep

the packaging away from children. When transporting the receiver from one place to another or if you

are returning it under warranty conditions, make sure to repack the receiver in its original packaging

with its accessories. Failing to comply with such packaging procedures could damage the product

and void your warranty.

PART 1 • English

English

1.3 Equipment Set-up

We recommend you consult a professional installer to set up your equipment. Otherwise, please

follow the instructions below:

 Refer to the user manual of your TV and antenna.

 Make sure that the HDMI cable and outdoor components are in a good condition.

 Use only a HDMI 1.3 cable or higher for maximum performance.

 If you use TV SCART connection, use then well shielded SCART cable.

This manual provides complete instructions for installing and using this receiver. The following

symbols will serve as follow.

MENU Represents a button on the remote control or the receiver.

(Bold Character)

Move to Represents a menu item within a window.

(Italic Character)

1.4 Accessories

 User manual

 1 remote control unit

 2x batteries (AAA type)

NOTE: The batteries should not be recharged, disassembled, electrically short-

circuited, be mixed or used with other types of batteries.

1.5 Usage of external USB devices

 It is recommended to use USB 2.0 storage devices or higher. If your device is not

compatible to USB 2.0 speciﬁcations, recording, playback and other multimedia

functions of the receiver might not work properly.

 To ensure best performance of your USB storage device please format it by this

receiver (menu “Media+”) to FAT32 system. Other ﬁle systems are not supported by

the receiver. However, it is possible to use already NTFS formatted disks. STRONG

cannot guarantee compatibility with all types of USB storage devices.

 It is advised not to store important information on USB storage devices used with

the receiver. Always make backups of data on your USB storage device before using it

with this receiver. STRONG will not take responsibility for any loss of information or

circumstances caused by loss of information.

2.0 YOUR RECEIVER

2.1 PIN-CODE DEFAULT: 0000

2.2 Front Panel

Fig. 1

1. USB: Connector for USB devices.

2. IR sensor: Point your remote control towards this sensor.

PART 1 • English

3. Mode indicator: RED indicates that the receiver is in STANDBY mode.

GREEN indicates that the receiver is in OPERATING mode.

2.3 Rear Panel

Fig. 2

1. ANT IN To connect to your antenna for the reception of broadcast signal.

2. TO TV To connect to the terrestrial antenna input of your TV set.

This connection will allow you to watch analogue terrestrial

programmes via the tuner in your TV.

3. TV SCART To connect your receiver with your TV set using a SCART cable.

4. S/PDIF To connect your receiver to a digital audio ampliﬁer.

5. HDMI To connect your receiver with your TV set using a HDMI cable.

6. Power Cord Your receiver requires a voltage of 220~240 V AC (Auto-

selectable), 50/60 Hz +/-5%. Check the local power speciﬁcation

before connecting your receiver to the wall outlet.

2.4 Remote Control

Fig. 3

1. q Turns the receiver On/Standby

2. ! Mutes audio output of the receiver

3. PG+/PG Page up/down and 10 channels steps in channel list mode

4. DTV/VCR No function

5. INFO Shows the current channel information

6. VOL+/VOL Volume up/down

7. MENU Opens the main menu, In menu you will get one step back

8. EXIT Exits from the menu or sub-menu

9. pq Menu Off: Change channel to previous/next.

Menu On: Moves the cursor up/down.

10. tu Menu Off: Increases/decreases the volume level.

Menu On: Change settings for speciﬁc Menus

11. OK Menu Off: Displays the current channel list

Menu On: Activates the highlighted menu item.

12. RECORD Records the TV programme to the connected storage device

13. TIMESHIFT Activates the time shift function

14. 0~9 Channel selection or value input

15. EPG Shows the EPG (Electronic Programme Guide) in TV mode

16. RECALL Back to previous shown channel

17. AUDIO Sets the current audio channel to left, right or stereo

18. TV/RADIO Toggles between TV or RADIO mode

19. FAV Favourite group selection

20. FILE Shows the Media Player list

21. TXT Shows Teletext on OSD (On Screen Display)

22. SUBTITLE Shows list of subtitled languages

23. 5 6 Fast rewind / Fast forward

24. Coloured buttons for Multimedia and Teletext functions

PART 1 • English

English

3.0 CONNECTION

3.1 Connecting to a Terrestrial Antenna

Fig. 4

To receive broadcast signal, your terrestrial indoor or outdoor antenna must be connected to the ANT IN

connector on the back of the receiver. Use a properly shielded antenna cable and suitable connectors.

The TO TV connector allows you to loop the antenna signal to a second receiver or TV set.

3.2 Connecting to TV with HDMI cable

Fig. 4

The TV set shall be connected with the receiver using a good quality HDMI 1.3 or higher cable. This

connection gives the highest possible quality.

3.3 Connecting to TV with SCART cable

Fig. 4

SRT 8102+ is also equipped with a SCART connector; alternatively, the TV set can be connected to the

receiver using a good quality SCART cable.

3.4 Connecting to a Digital Audio Ampliﬁer with S/PDIF

Fig. 4

By connecting your receiver to a digital ampliﬁer or home theatre system, you can enjoy the best possible

sound quality and multi-channel audio (depending on broadcast). Connect your Digital Audio Ampliﬁer or

home theatre system with a suitable cinch cable to the S/PDIF connector on the back of the receiver.

3.5 Connecting to a Digital Audio Ampliﬁer and TV

using HDMI

Fig. 5

By connecting your receiver to the latest digital ampliﬁers or Home Cinema systems with HDMI

connections, you will enjoy the best possible sound quality and multi-channel audio (depending on

broadcast). Connect the HDMI output of the receiver to an input of your ampliﬁer, and then connect

the HDMI output of the ampliﬁer to your TV set. Select the correct input on your ampliﬁer to watch

and listen to programmes.

3.6 Connecting a USB storage device

Fig. 6

NOTE: We recommend the use of a hard disk drive USB 2.0 or higher for recording

and play back of TV events.

For proper functioning of Time Shift and recording functions, a fast USB device (such as a hard

disk drive) is needed. Interrupted playback or a distorted picture during playback or Time Shift are

indications for a low device speed. STRONG cannot guarantee proper functioning of recoding and or

Time Shift functions with all USB devices.

PART 1 • English

4.0 STARTING UP FOR THE FIRST TIME

If you use your receiver for the ﬁrst time, the Welcome “Easy install” menu appears. Use pq to move

the highlight to the setting you wish to alter and use tu to change values. Start by selecting your

language using tu. Once you have selected your language, press q to move the highlight to the

next item and use tu to change.

Language: Select your language.

Region: Select your region where this receiver is used.

Subtitle: Select Normal to display subtitles per default, Select Hard of Hearing to show

HoH subtitles per default. Select Off to hide subtitles per default.

Aspect Mode: Use this option to select the aspect ratio of your TV and the preferred

conversion method. Options are: Auto (automatic detection of aspect ratio),

4:3 Panscan (Displays 16:9 widescreen broadcasts full screen on your 4:3 TV),

4:3 letterbox (black bars on top and under the picture on a 4:3 TV) and 16:9

(use this setting for 16:9 TV sets).

Scan mode: Select All to store scrambled and free to air channels or select Free to store

only free to air channels.

Connection: Use this option to select the connection to your TV set. Select HDMI or

SCART.

When all settings have been made, move the highlight to OK and press OK to continue.

NOTE: Wrong region selection can lead to missing channels or channels being

stored on wrong positions in the channel list.

The receiver will now advance to the Aerial Adjustment screen.

This part of the wizard is of great help when setting up your antenna system.

Use pq to move the highlight to the setting you wish to alter and use tu to change values.

The following settings are available:

Antenna Power: Set to On if you use an active antenna. When set to On, 5 V will be present on

the ANT IN connector of the receiver. Select Off for passive antennas.

Beeper: Select On for an audible indication of signal reception. Off turns the

beeper off.

Channel No.: Select a channel that is known to carry a broadcast in your region. The Signal

Strength and Signal Quality bars give a visual indication of the reception.

Adjust your antenna to obtain maximum signal strength and quality.

Once all settings are made, press OK to start scanning.

The receiver will now search for all available channels. Once scanning is ﬁnished, the receiver

switches to viewing mode.

TIP: If the Welcome “Easy install” menu does not appear after switching on the

receiver the ﬁrst time, reset the receiver to factory settings by pressing the

MENU button and selecting Load Factory Setting in the submenu Tools.

(Default PIN 0000)

PART 1 • English

English

5.0 QUICK GUIDE TO USING YOUR RECEIVER

We at STRONG understand that you can’t wait to enjoy your new high deﬁnition digital terrestrial

receiver. The following quick guide will make you familiar with the basic operation of this device. We

do, however, advice you to read the full manual to get the best performance from your receiver.

To turn your receiver ON or to Standby, use the q button on the remote control.

Choose the desired channel with the pq buttons. Alternatively, you can digit the channel number

with the 0~9 buttons on the remote control. Or press OK in viewing mode to display the channel list.

The volume can be adjusted with the tu buttons.

6.0 OPERATION

Your new receiver is equipped with several features to make watching TV a true pleasure. This

paragraph describes these features. Please also read chapter 7.0 to get familiar with the menu of

your receiver.

6.1 Changing channels

Your new receiver is equipped with four ways to change channels.

 Via direct access using the 0~9 buttons.

 Via the channel list trough OK button.

 Via the PG+ and PG- keys.

 Via the pq keys.

6.1.1 Direct access via 0~9 buttons

To gain direct access to a certain channel, simply input its number with the 0~9 buttons on the

remote control. Channel numbers can be up to four digits long. Entering a number with less than

four digits is possible. Just wait a few seconds and your receiver will switch to the selected channel or

press OK immediately after selecting the channel number.

6.1.2 Channel list

Press OK in viewing mode to display the Channel List. Use pq in the Channel List to highlight your

channel of choice and press OK once to select the highlighted channel. Press OK again to leave the

Channel List.

TIP: Use tu to toggle between the All Channel list and favourite lists or press

FAV for a list of available favourite lists.

6.1.3 Using the pq or PG+/PG- keys

p switches to the next channel.

q switches to the previous channel.

PG+ switches to the next 10 channels.

PG- switches to the previous 10 channels.

PART 1 • English

6.2 Info Banner

While watching TV you can press the INFO button any time to get information about the current

channel and event*. Press INFO twice for extended EPG details about the current channel. Press

INFO three times for technical details about the current channel.

*Event information is displayed when available. Availability depends on broadcast.

6.3 Selection of audio language

Some channels support a choice of audio formats and/or languages. To select another audio stream,

press AUDIO in viewing mode. A list with available audio streams will now be displayed. Use pq to

select the desired stream and conﬁrm with OK. The audio channel as stereo, mono, left and right can

be selected with the tu buttons.

6.4 Teletext

Your receiver includes a fully featured Teletext. To access Teletext, press the TXT button in viewing

mode and use the 0~9 buttons to input the number of the page you wish to see. The coloured

buttons of the remote control allow you to jump to selected pages directly, as indicated on the bottom

of the teletext screen. Use the pq buttons to select one page up or down, use tu buttons to select

subpages. Press EXIT or TXT to get back to viewing mode.

6.5 Subtitles

Some channels support a choice of subtitle languages. Press SUBTITLE in viewing mode to display a

list of available subtitle languages. Select your subtitle of choice with pq and press OK to conﬁrm.

Press EXIT to leave without making changes.

6.6 Time Shift

Time Shift allows you to pause live broadcasts and resume playback later. Press TIMESHIFT in

viewing mode to activate this mode. On screen the message Timeshift On appears, live TV keeps

playing. To pause press the 2 button and press u to resume Time shifted playback. Press 5 6 for

fast rewind/fast forward. Press 3 to return to live TV.

Press EXIT to exit Time Shift mode.

NOTE: Time Shift needs a connected USB storage device with sufﬁcient free space

and sufﬁcient speed in order to work properly.

6.7 EPG (Electronic Programme Guide)

The Electronic Programme Guide is a very useful function that allows you to view event schedules

and information and to mark programmes for recording. To access the EPG, press the EPG button in

viewing mode. Use pq to select a channel and tu to select an event. Press OK to display detailed

information on the selected event. Use EXIT to quit the detailed information screen. Press RED to

get to the Step Time function. Use tu to select the desired step and OK to execute it. Press EXIT to

quit the Step Time function. Press GREEN to set a timer for a selected event. Refer to section 7.3.4 for

details on the timer function.

NOTE: Availability of EPG data depends on broadcast.

PART 1 • English

English

6.8 Instant Recording

Your new receiver allows you to make an instant recording of the programme you are watching.

Simply press RECORD to start the recording. To enter the duration for the recording, press RECORD

again. Use the 0~9 keys to input the desired recording time.

During the start of recording a recording sign will be shortly shown on the upper left of your TV

screen. To stop the recording, press 3. Select Yes and press OK again to stop the recording.

Note: You can access the Record Manager via the RED button, see chapter 7.6.2 for

details.

*Please connect an USB storage device with sufﬁcient free space before you start a recording.

7.0 MAIN MENU

The main menu gives you access to settings, multimedia functions and inbuilt games. To access the

main menu, press MENU in viewing mode. The main menu consists of the following sub menus:

Edit Channel, Installation, System Setup, Tools, Game and Media+.

Throughout the main menu, MENU or EXIT can be used to get back to the previous screen.

7.1 Edit Channel

Use pq to select Edit Channel and press OK or u to enter.

Use pq to highlight the submenu of choice and press OK to select.

Press EXIT or t to get back to the main menu.

7.1.1 TV Channel List

In Edit Channel menu select TV Channel List with pq and press OK to enter.

Use tu to change the channel group (assumed you have already set up favourite groups).

Select the channel of choice with pq. Press OK to view the selected channel in the preview box.

7.1.1.1 Adding channels to favourite lists

Channels from the TV Channel List can be added to up to 8 different favourite groups. Press FAV

while in TV Channel List to access this function. The FAV sign on the top of the screen will move up

to indicate that the favourite function is selected. Use pq to select a channel you wish to add to a

favourite group. When the highlight is on the channel of your choice, press OK. A list with all available

favourite lists will now pop up. Use pq to select the favourite list you wish to add the channel to and

press OK, press EXIT to ﬁnalize the process. Favourite channels will be marked with a heart symbol.

When all changes have been made, press EXIT twice. A conﬁrmation banner will pop up. Select Yes to

save the changes or No to discard.

7.1.1.2 Locking channels

Locked channels can only be watched after entering the pin code. (DEFAULT PIN: 0000)

To lock or unlock a channel, press RED while in TV Channel List. The red Lock sign on the top of the

screen will move up to indicate that the Lock function is selected. Use pq to select the a channel

and press OK to lock or unlock it. You are asked to input the pin code. (DEFAULT PIN: 0000) Locked

channels will be marked with the  symbol. Locking/unlocking multiple channels in one session is

possible. When all changes have been made, press EXIT twice. A conﬁrmation banner will pop up.

PART 1 • English

Select Yes to save the changes or No to discard. Locking/unlocking multiple channels in one session

is possible.

7.1.1.3 Skipping channels

Channels marked with Skip will be skipped when zapping channels with the pq buttons. The

channels will still be available from the channel list.

To mark channels for skipping, press GREEN while in TV Channel List. The Skip symbol on the top of

the screen will move up to indicate that the Skip function is selected. Use pq to select the channel

and press OK to mark or unmark it for skipping. Channels set for skipping will be marked with the

 symbol. When all changes have been made, press EXIT twice. A conﬁrmation banner will pop up.

Select Yes to save the changes or No to discard.

7.1.1.4 Moving channels

To enable the Move function, press YELLOW while in TV Channel List. The Move symbol on the top of

the screen will move up to indicate that the Move function is selected. Use pq to select the channel

and press OK to select it. You can now move the selected channel up or down the channel list using

pq. When the channel is on the position of your choice, press OK again. The channel is now ﬁxed

on its new position. When all changes have been made, press EXIT twice. A conﬁrmation banner will

pop up. Select Yes to save the changes or No to discard.

7.1.1.5 Editing channels

The Edit function allows you to Sort, Rename or Delete channels. To enter the Edit menu, press BLUE

while in TV Channel List. The Edit Channel menu will appear.

If you made changes in the previous menu, but not saved them yet, you will be asked to do so now.

Sort

Press RED to enter the Sort menu.

Use pq to select sorting method and press OK to conﬁrm.

Possible methods are:

Name (A-Z): Sorting in alphabetical order from A to Z.

Name (Z-A): Sorting in alphabetical order from Z to A.

Free/Scramble: First in the list will be Free-To-Air channels.

Lock: All unlocked channels will placed ﬁrst in the list.

Default: Sorting by searched Order (from lowest to highest frequency or by LCN

numbering).

Rename

Press GREEN in Edit Channel to enable the Rename function. The Rename sign will move up to

indicate that Rename is selected. Use pq to highlight a channel and press OK to select it. A text ﬁeld

will now pop up at the right of the screen. Use tu pq to select characters and enter them with OK.

When you have ﬁnished editing, press BLUE to enter the changes. When all changes have been made,

press EXIT twice. Select Yes to save the changes or No to discard.

PART 1 • English

English

Delete

Press BLUE in Edit Channel to enable the Delete function. The Delete sign will move up to indicate

that Delete is selected. Use pq to highlight a channel and press OK to mark it for deletion. The

receiver asks you to enter the pin code. Once you have marked all channels you wish to delete, press

EXIT twice. A conﬁrmation banner will be displayed. Select Yes to delete the marked channels or No

to cancel.

7.1.2 Radio Channel List

Basically, the operation of the Radio Channel List is the same as in the TV Channel List. The only

difference is that in Radio Channel List there is no video information, so it will always display the radio

logo at the right preview screen.

7.1.3 Delete all

Use this menu to delete all stored channels. Select Delete All with pq and press OK. The receiver

asks you to enter the pin code. (Default pin:0000). In the conﬁrmation window select Yes with tu

and press OK to delete or select No to cancel.

WARNING! The Delete all function will permanently delete all current channels and all

favourite lists from your receiver, and you are not able to leave the menu until

you search for channels again.

7.2 Installation

7.2.1 Auto Scan

Use pq to select Installation and press OK or u to advance.

Select Auto Scan with pq and press OK to enter.

Use tu to toggle between FTA Only Yes or No. When FTA Only is set to Yes, scrambled channels

won’t be stored in the channel list. Use pq to highlight Search. Now press OK to start auto scan.

The receiver will store all newly found channels in the channel list.

7.2.2 Channel Scan

Use pq to select Installation, press OK or u to advance.

Use pq to select Channel Scan and press OK to enter.

Use tu to toggle between available scan modes: By Channel and By Frequency.

If By Channel is selected, use the cursor buttons to select Scan Band and Channel No. If By Frequency

is selected, use the cursor buttons to select Frequency and Bandwidth. Highlight Search and press OK

to start scanning. Newly found channels will be stored in the channel list.

7.2.3 Aerial Adjustment

Use pq to select Installation, press OK or u to advance.

Use pq to select Aerial Adjustment and press OK to enter.

Use pq move the highlight to the setting you wish to alter and use tu to change values.

PART 1 • English

The following settings are available:

Antenna Power: Set to On if you use an active antenna. When set to On, 5 V will be present on

the ANT IN connector of the receiver. Select Off for passive antennas.

Beeper: Select On for an audible indication of signal reception. Off turns the

beeper off.

Channel No.: Select a channel that is known to carry a broadcast in your region. The Signal

Strength and Signal Quality bars give a visual indication of the reception.

Adjust your antenna to obtain maximum signal strength and quality.

Press EXIT to leave the Aerial Adjustment screen.

7.2.4 LCN (Logical Channel Numbering)

If LCN (Logical Channel Numbering) is activated and an LCN signal is provided by the operator,

channels will be stored in an operator deﬁned order. Set LCN to On to activate operator deﬁned

channel numbering or Off to store channels in found order.

7.3 System Setup

This menu allows you to manage the system settings of your receiver. It consists of the following sub-

menus: Language, TV System, Local Time Setting, Timer Setting, Parental Lock, OSD Setting, Favourite

and Auto Standby.

Press pq to highlight the menu of choice and press OK advance to the next screen. Use pq to

move the highlight to the setting of choice. Values can be changed with tu. Press EXIT to leave.

7.3.1 Language

This menu allows you to set up your language preferences.

Language: Use tu to select the language for the On Screen Display.

First Audio: Use tu to select Audio language.

Second Audio: Use tu to select a language that will be played when the language selected

at First Audio isn’t available.

Subtitle Language: Use tu to select the preferred subtitle language.

Subtitles: Use tu to select the preferred subtitle type to be displayed automatically.

Select Normal, Hard of Hearing or Off

Teletext: Use tu to select the preferred teletext language (when available.)

7.3.2 TV System

Use this menu to match your receiver to your TV set. The following settings are available:

Video Resolution: Toggles between 576i up to 1080p. Please use a setting that matches your

TV’s speciﬁcations. After a selection is made, you will be asked to conﬁrm.

NOTE: Selection is only applicable on HDMI.

Aspect Mode: Use this option to select the aspect ratio of your TV and the preferred

conversion method. The options are: Auto (automatic detection of aspect

ratio), 4:3 Panscan (Displays 16:9 widescreen broadcasts full screen on your

4:3 TV), 4:3 letterbox (black bars on top and under the picture on a 4:3 TV)

and 16:9 (use this setting for 16:9 TV sets).

PART 1 • English

English

Connection: Use this option to select the connection to your TV set. Select HDMI or TV

SCART. If connection type HDMI is selected, then only the CVBS signal is

available on the TV SCART.

Digital Audio Output: Toggles between PCM and Bitstream output. When PCM is selected, all

all digital audio will be converted to stereo audio. Bitstream enables multi-

channel audio on HDMI for use with a Home Cinema Set.

7.3.3 Local Time Setting

Here you can set up your region and time zone.

Region: Use tu to select the region you live in.

GMT Usage: Set to On for broadcaster deﬁned time or to Off to input time and

date manually.

GMT Offset: Allows you to adjust the time zone you live in. This option is only available

when GMT Usage is set to On.

The GMT Offset range is "-11:30 ~ +12:00", increasing by half hours

progressively. The cities matching the set GMT Offset are displayed at the

bottom of the screen.

Summer Time: Select Off or On to add one hour extra for summer time during the summer.

Date: Date and Time settings are available only when GMT Usage is set to Off. Use

the 0~9 buttons to enter the date. Press EXIT to proceed.

Time: Date and Time settings are available only when GMT Usage is set to Off. Use

the 0~9 buttons to enter the time. Press EXIT to proceed.

Time Display: Select On to display time on screen, Off to remove.

7.3.4 Timer Setting

This menu allows you to set up to 8 timed events for recording or waking up the receiver.

Use pq to select Timer Setting from the System Setup menu and press OK to enter.

The receiver will display a list with 8 timers, followed by their respective status. Select the timer you

wish to set or change with pq and press OK to proceed.

The timer setup menu will now be displayed.

The following settings are available:

Timer Mode: Choose between Off (Timer inactive), Once or Daily (Timer will be executed

every day, same time) or Weekly (timer will be executed every week, same day,

same time)

Timer Service: Choose between Channel (Timer will wake up the receiver) or Record (Timer

will start to record the scheduled event).

Wakeup Channel: Use tu to select the channel the timer will wake up with.

Wakeup Date: Use the 0~9 buttons to input the date for the timed event.

Wakeup Time: Use the 0~9 buttons to input the start time.

Duration: Use the 0~9 buttons to input the timer duration.

When all settings are according to your wishes, use pq to move the highlight to Save and press OK

to conﬁrm. To quit the timer without saving your settings, move the highlight to Cancel.

PART 1 • English

7.3.5 Parental Lock

This menu allows you to protect the installation menu and/or channels with a password. You can also

enter a new password in the Parental Lock menu.

Use pq to select Parental Lock from the System Setup menu and press OK to proceed. You will be

asked to enter your pin code. (DEFAULT: 0000)

Menu Lock: Locks the installation menu. You can set Menu Lock to On or Off.

Channel Lock: Choose between: Off, AGE 4, AGE 5, …up to AGE 18. Channels with a

parental rating above the chosen age will be protected with a password (if

available in your local broadcast.)

New Password: Enter your new password (4 digits) here.

Conﬁrm Password: Re-enter your password here to conﬁrm.

7.3.6 OSD Setting

This menu allows you to change settings for: OSD Timeout and OSD Transparency.

OSD timeout: Sets the time after which on screen banners and messages disappear. The

range is 1~10 seconds.

OSD Transparency: To set the OSD transparency from Off ~ 40% with 10% steps.

Load Default OSD Setting:

Press OK to clear all OSD settings and reset to default values.

7.3.7 Favourite

This menu allows you to personalize the names of the 8 available favourite lists.

Use pq to select Favourite from the System Setup Menu and press OK to proceed. The names of all

groups are now displayed. Select favourite group with pq and press OK to edit its name. A text ﬁeld

will now pop up at the right of the screen. Use tu pq to select characters and enter them with OK.

When you have ﬁnished editing, press BLUE to save the changes. When all changes have been made,

press EXIT twice.

7.3.8 Auto Standby

Auto Standby is a new feature that helps you reducing power consumption. When set to On, the

receiver will turn to standby if it doesn’t receive any commands for three hours. Set Auto Standby to

Off to avoid the automatic switch down.

7.4 Tools

Press MENU in viewing mode to enter the Main Menu.

Select the Tools submenu with pq and press OK or u to enter.

Use pq to highlight the submenu of choice and press OK proceed.

Press EXIT to leave.

7.4.1 Receiver Information

This submenu shows receiver speciﬁc information such as hardware version and software version.

It also displays our web address www.strong.tv. Please have the Receiver Information screen on hand

when you call our hotline. The person who answers your call might ask for the information given in

this screen.

PART 1 • English

English

7.4.2 Load Factory Setting

This option allows you to reset the receiver to factory settings, which clears all stored channels.

WARNING! By resetting your receiver to factory default, all your settings and stored

channels will be permanently deleted. It will restore your receiver to an “out of

the box” state. Please use this option with care.

Use pq to select "Load Factory Setting" in the Tools menu and press OK. You are asked to

input password.

Input the correct password using the 0~9 buttons (default: 0000). A conﬁrmation window

is displayed.

Select Yes to return to factory settings. Select No to cancel.

Press EXIT to leave.

7.4.3 S/W Upgrade by OTA

This receiver is equipped with an Over The Air software upgrade option. An Over The Air update

might not be available in your region. Please visit our website www.strong.tv or contact your local

service hotline for more information about this option.

7.4.4 Upgrade by USB

This feature allows you to upgrade receiver software via the USB port. When new software is available

for your receiver, it can be downloaded from our website www.strong.tv.Place the software ﬁle

(unzipped) in the root directory of your USB storage device (HDD, memory stick etc.) and insert this

device into the USB port of the receiver.

Select Upgrade by USB from the Tools menu and press OK to proceed.

The upgrade menu will now be displayed.

Use pq to select Upgrade Mode and choose option Allcode.

Use pq to select Upgrade File and choose the ﬁle containing the new software.

Once all settings are made, move the highlight to Start and press OK to start the upgrade process.

After a few seconds, the receiver asks: “Are you sure to burn ﬂash?”. Select Yes to ﬁnalize the upgrade

or No to quit without upgrading.

NOTE If, after a software upgrade, the receiver should behave in an unexpected way,

please perform a factory reset as well. See chapter 7.4.2

WARNING! After an update the receiver restarts automatically. During the upgrade

process NEVER disconnect the receiver from the mains or switch off the

power! Doing so might damage your receiver and will void warranty!

7.4.5 Remove USB device safely

Select Remove USB device safely from the tools menu and press OK. The receiver will display a

message indicating that you can safely remove your storage device from the receiver.

PART 1 • English

NOTE: After performing this function, the USB device is no longer accessible from

your receiver. To gain access to your storage device again, re insert it or switch

the receiver to standby and on again.

7.5 Games

Your receiver is equipped with two games which can be played on your TV screen using the receiver

remote control.

Use pq to select Game from the Main menu and press OK or u to proceed.

Select one of the available games (Othello or Sudoku) using pq and press OK to start the game.

Follow the directions on screen.

Press EXIT to quit a game.

7.6 Media+

The Media+ menu consists of the following submenus: Media Player, Record Manager, DVR HDD

Information, HDD Format and DVR Conﬁguration.

Use pq to highlight the menu of choice and press OK to enter.

Press EXIT to quit.

7.6.1 Media Player

This function allows you to play MPEG, AVI, MP3, JPG many other type ﬁles from connected storage

device (see details in technical part).

Select Media Player from the Media+ menu and press OK to proceed.

Use pq to browse the connected USB device and use OK to open folders. Press OK to play the

highlighted selection.

The help banner at the bottom of the screen explains all buttons used in the Media player. Press EXIT

to quit.

NOTE: You can also access the Media Player from viewing mode with the FILE

button on the remote control.

7.6.2 Record Manager

The Record Manager gives you access to previously recorded events.

Select Record Manager from the Media+ menu and press OK to enter.

Use pq to highlight the recording you wish to play and press OK start playback.

Press EXIT to exit.

During playback, it is possible to perform the following actions:

YELLOW To pause the playback.

BLUE To resume playback.

5 6 For fast forward or fast rewind during playback.

RED Press to stop playback and return to Record Manager.

When the timer banner is on screen (activated by pressing PLAY or INFO), the following actions are

possible:

Use tu and press OK to jump forwards and backwards in time during playback.

PART 1 • English

English

1 = Set marker point in playback, press again to delete marker point.

2 = Jump to next marker point.

3 = Jump forwards in time. (See details in 7.6.5 DVR Conﬁguration under Step to.)

NOTE: You can also access the Record Manager from viewing mode with the RED

button on the remote control. The help banner at the bottom of the screen

explains all buttons in the Record Manager. Press EXIT to save the settings

and quit the menu.

7.6.3 DVR HDD Information

This option shows relevant information about the connected USB device.

Select DVR HDD Information from the Media+ menu and press OK to enter.

Press EXIT to leave.

7.6.4 HDD Format

The HDD format menu allows you to format the connected USB device.

WARNING! Formatting will permanently delete ALL data stored on the connected device.

Please make a backup copy of all data you wish to keep before entering the

HDD Format menu. STRONG cannot be held responsible for loss of data

from USB devices used with this receiver.

Select HDD Format from the Media+ menu and press OK to enter. Use tu to select the partition you

wish to format (Partition 1 is set per default) and press q to highlight Format. Press OK to proceed,

select FAT or Cancel, or press EXIT to leave without formatting.

NOTE: It is possible to use already NTFS formatted USB disks.

7.6.5 DVR Conﬁguration

This menu allows you to make settings for Time Shift, recording and playback.

Select DVR Conﬁguration from the Media+ menu and press OK to enter.

Use pq to move the highlight and tu to change settings.

Press EXIT to quit.

Time Shift: On or Off. When Time Shift is set to Off, Time Shift becomes inactive.

Time Shift to Record: On or Off. When set to On, Time Shift is also possible during recording.

Record Type: TS or PS. When TS is selected, recordings will also include subtitles and

teletext (when available). PS makes recordings without these extras.

Record Selection Select the partition whereto the receiver should record.

Standby after record: On or Off. Select if receiver must go to standby mode after Timer record.

Step to: 30 sec to 10 min. Set the time step you like to jump forward with the button 3

during playback of recorded ﬁles.

Page is loading ...

Strong SRT 8102+ User manual

Brand: Strong

Model: SRT 8102+

Category: TV set-top boxes

Type: User manual

This manual is also suitable for

STR 8102 PLUS

Download PDF

report

Strong SRT 8102+ User manual

This manual is also suitable for

Strong SRT 8102+ User manual

Related papers

Other documents