Goodmans GDB01SFV1 Quick start guide

SET TOP BOX

The full User Manual is available online at:

www.goodmans.co.uk/support

Set Top Box

Model: GDB01SFV1 QSG-AUGUST14-GDB01SFV1

WANT TO KNOW MORE?

FIRST TIME INSTALLATION:GETTING STARTED:

Follow the instructions below to connect and power

on the set top box.

When connected correctly, the ﬁrst time you

power on the set top box you will see the

above screen.

Use the

/ buttons to navigate up or down

and the / buttons to change the options.

When complete press the ENTER button.

To complete the installation use the /

buttons to select YES and then press the

ENTER button.

A channel search will begin automatically

and list the available stations. If multiple

transmitters are available, select from the pop

up menu using the

/ buttons, and press

ENTER.

Take the antenna coax cable and connect it to the ANT

IN connector on the back panel of the set top box.

Connect a scart cable (not supplied) between the

SCART-TV socket on the back panel of the set top box

and the scart socket on your TV

Plug the mains lead into an available socket.

Insert batteries (AAA) into the remote control.

Ensuring the + and - marks match.

SCART-TV

ANT IN LOOP OUT

SCART-TV

ANT IN LOOP OUT

SCART-TV

ANT IN LOOP OUT