3com SuperStack II 3300 SM User manual

Category
Network switches
Type
User manual

This manual is also suitable for

®
http://www.3com.com/
SuperStack
®
II Switch 3300 SM
User Guide
3C16987
Part No. DUA1698-7AAA01
Published May 2000
3Com Corporation
5400 Bayfront Plaza
Santa Clara, California
95052-8145
Copyright © 2000, 3Com Technologies. All rights reserved. No part of this documentation may be reproduced
in any form or by any means or used to make any derivative work (such as translation, transformation, or
adaptation) without written permission from 3Com Technologies.
3Com Technologies reserves the right to revise this documentation and to make changes in content from time
to time without obligation on the part of 3Com Technologies to provide notification of such revision or
change.
3Com Technologies provides this documentation without warranty, term, or condition of any kind, either
implied or expressed, including, but not limited to, the implied warranties, terms or conditions of
merchantability, satisfactory quality, and fitness for a particular purpose. 3Com may make improvements or
changes in the product(s) and/or the program(s) described in this documentation at any time.
If there is any software on removable media described in this documentation, it is furnished under a license
agreement included with the product as a separate document, in the hard copy documentation, or on the
removable media in a directory file named LICENSE.TXT or !LICENSE.TXT. If you are unable to locate a copy,
please contact 3Com and a copy will be provided to you.
UNITED STATES GOVERNMENT LEGEND
If you are a United States government agency, then this documentation and the software described herein are
provided to you subject to the following:
All technical data and computer software are commercial in nature and developed solely at private expense.
Software is delivered as “Commercial Computer Software” as defined in DFARS 252.227-7014 (June 1995) or
as a “commercial item” as defined in FAR 2.101(a) and as such is provided with only such rights as are
provided in 3Coms standard commercial license for the Software. Technical data is provided with limited rights
only as provided in DFAR 252.227-7015 (Nov 1995) or FAR 52.227-14 (June 1987), whichever is applicable.
You agree not to remove or deface any portion of any legend provided on any licensed program or
documentation contained in, or delivered to you in conjunction with, this User Guide.
Unless otherwise indicated, 3Com registered trademarks are registered in the United States and may or may not
be registered in other countries.
3Com, the 3Com logo, Net Age, SmartAgent, SuperStack and Transcend are registered trademarks of
3Com Corporation. CoreBuilder and PACE are trademarks of 3Com Corporation. 3ComFacts is a service mark
of 3Com Corporation.
Novell and NetWare are registered trademarks of Novell Incorporated.
Adobe and Acrobat are registered trademarks of Adobe Systems Incorporated.
All other company and product names may be trademarks of the respective companies with which they are
associated.
Environmental Statement
It is a 3Com policy to be environmentally friendly in all operations. This manual is printed on paper that comes
from sustainable, managed European forests. The production process for making the pulp has a reduced AOX
level (adsorbable organic halogen) resulting in elemental chlorine-free paper.
The paper is fully biodegradable and recyclable.
C
ONTENTS
A
BOUT
T
HIS
G
UIDE
Conventions 8
Related Documentation 9
Year 2000 Compliance 10
Documentation Comments 10
Product Registration 10
1
I
NTRODUCING
THE
S
WITCH
3300 SM
About the SuperStack II Switch 3300 SM 12
Summary of Features 12
Switch 3300 SM Front View Detail 13
10BASE-T/100BASE-TX Ports 13
1000BASE-SX Port 13
LEDs 13
Switch 3300 SM Rear View Detail 15
Unit Information Label 15
Power Socket 15
Redundant Power System Socket 15
Console Port 16
Matrix Port 16
Network Configuration Examples 17
Switch 3300 SM as a Segmentation Switch 17
Switch 3300 SM as a Collapsed Backbone Switch 18
Switch 3300 SM as a Desktop Switch 19
Configuration Rules for Fast Ethernet 20
Configuration Rules with Full Duplex 21
Configuration Rules for Gigabit Ethernet 22
Configuration Rules for the 3300 SM 22
2
I
NSTALLING
THE
S
WITCH
Choosing a Suitable Site 24
Rack-mounting 24
Placing Units On Top of Each Other 25
Stacking Units 26
Stacking Two Units 26
Stacking Up To Four Units 27
The Power-up Sequence 29
Connecting a Redundant Power System 29
Powering-up the Switch 3300 SM 29
Checking for Correct Operation 29
Choosing the Correct Cables 30
Solving Problems Indicated by LEDs 31
Managing the Switch 32
A
S
AFETY
I
NFORMATION
Important Safety Information 34
Linformation de Sécurité Importante 36
Wichtige Sicherheitsinformationen 38
B
P
IN
-
OUTS
Null Modem Cable 41
PC-AT Serial Cable 41
Modem Cable 42
RJ45 Pin Assignments 42
C
T
ECHNICAL
S
PECIFICATIONS
D
T
ECHNICAL
S
UPPORT
Online Technical Services 47
World Wide Web Site 47
3Com Knowledgebase Web Services 47
3Com FTP Site 48
3Com Facts Automated Fax Service 48
Support from Your Network Supplier 48
Support from 3Com 48
Returning Products for Repair 50
G
LOSSARY
I
NDEX
3C
OM
C
ORPORATION
L
IMITED
W
ARRANTY
EMC S
TATEMENTS
A
BOUT
T
HIS
G
UIDE
This guide provides all the information you need to install and use a
SuperStack
®
II Switch 3300 SM (3C16987) unit with default settings. If
you want to change the way the Switch works using management
software, refer to the SuperStack II Switch Management Guide.
The guide is intended for use by network administrators who are
responsible for installing and setting up network equipment;
consequently, it assumes a basic working knowledge of LANs (Local Area
Networks).
If the information in the release notes that are shipped with your product
differs from the information in this guide, follow the instructions in the
release notes.
Most user guides and release notes are available in Adobe Acrobat
Reader Portable Document Format (PDF) or HTML on the 3Com
World Wide Web site:
http://www.3com.com/
This guide makes reference to the SuperStack II Switch 3300 MM. This
Switch has three fixed Matrix Ports on its rear panel and can be used to
stack any 1100/3300 family Switch. Note that any 1100/3300 family
Switch fitted with a Matrix Module can also be used to stack Switches.
All the Switches mentioned in this guide are compatible with the
Switches found within the SuperStack II 1100/3300 family range.
8 A
BOUT
T
HIS
G
UIDE
Conventions
Table 1 and Table 2 list conventions that are used throughout this guide.
Tab le 1
Notice Icons
Icon Notice Type Description
Information note Information that describes important features or
instructions
Caution Information that alerts you to potential loss of data or
potential damage to an application, system, or device
Warning Information that alerts you to potential personal injury
Tab le 2
Text Conventions
Convention Description
Screen displays
This typeface represents information as it appears on the
screen.
Syntax
The word syntax means that you must evaluate the syntax
provided and then supply the appropriate values for the
placeholders that appear in angle brackets. Example:
To change your password, use the following syntax:
system password <password>
In this example, you must supply a password for
<password>.
Commands
The word command means that you must enter the
command exactly as shown and then press Return or Enter.
Commands appear in bold. Example:
To display port information, enter the following
command:
bridge port detail
The words enter
and type
When you see the word enter in this guide, you must type
something, and then press Return or Enter. Do not press
Return or Enter when an instruction simply says type.
Keyboard key names If you must press two or more keys simultaneously, the key
names are linked with a plus sign (+). Example:
Press Ctrl+Alt+Del
Related Documentation 9
Related
Documentation
In addition to this guide, each Switch 3300 SM document set includes the
following:
Management Guide
This guide contains all the management information for the Switch.
Quick Reference Guide
This guide contains a quick summary of the hardware and software
information for the Switch.
Quick Installation Guide
This guide contains a summary of the package contents, and a quick
summary of the installation information for the Switch.
Release Notes
These notes provide information about the current software release,
including new features, modifications, and known problems.
SuperStack II Switch Help
This help provides information about the web interface software of
the Switch. It is supplied on the SuperStack II Switch CD-ROM.
SuperStack II Switch README File
This file provides information about the current software release,
including new features, modifications, and known problems. It is
supplied on the SuperStack II Switch CD-ROM.
Words in
italics
Italics are used to:
Emphasize a point.
Denote a new term at the place where it is defined in the
text.
Identify menu names, menu commands, and software
button names. Examples:
From the
Help
menu, select
Contents
.
Click
OK
.
Tab le 2
Text Conventions (continued)
Convention Description
10 A
BOUT
T
HIS
G
UIDE
In addition, there are other publications you may find useful:
Documentation accompanying the Advanced Redundant Power
System.
Year 2000
Compliance
For information on Year 2000 compliance and 3Com products, visit the
3Com Year 2000 Web page:
http://www.3com.com/products/yr2000.html
Documentation
Comments
Your suggestions are very important to us. They will help make our
documentation more useful to you. Please e-mail comments about this
document to 3Com at:
pddtechpubs_comments@3com.com
Please include the following information when commenting:
Document title
Document part number (on the title page)
Page number (if appropriate)
Example:
SuperStack II Switch 3300 SM User Guide
Part Number DUA1698-7AAA01
Page 21
Product
Registration
You can now register your SuperStack II Switch on the 3Com web site to
receive up-to-date information on your product:
http://www.3com.com/productreg/pdd
1
I
NTRODUCING
THE
S
WITCH
3300 SM
This chapter contains introductory information about the Switch and how
it can be used in your network. It covers the following topics:
About the SuperStack II Switch 3300 SM
Switch 3300 SM Front View Detail
Switch 3300 SM Rear View Detail
Network Configuration Examples
Configuration Rules for Fast Ethernet
Configuration Rules with Full Duplex
Configuration Rules for Gigabit Ethernet
Configuration Rules for the 3300 SM
12 C
HAPTER
1: I
NTRODUCING
THE
S
WITCH
3300 SM
About the
SuperStack II
Switch 3300 SM
The SuperStack
®
II Switch 3300 SM connects:
your existing 10Mbps devices.
high-performance workgroups with a 100Mbps or 1000Mbps
backbone or server connection.
users to dedicated 100Mbps ports in one switch.
In addition, as part of the 3Com
®
SuperStack II range of products, you
can combine it with any SuperStack II system as your network grows.
Summary of Features
The Switch has the following hardware features:
24 Fast Ethernet auto-negotiating 10BASE-T/100BASE-TX ports
1000BASE-SX Gigabit Ethernet port
One Matrix Port for connecting units in the Switch 1100/3300 family
to form a stack. This enables you to:
Connect two units back-to-back using a single Matrix Cable
Stack the Switch with up to three other units in the Switch
1100/3300 family, when one of the units is a Switch 3300 MM unit
SuperStack II architecture
Connects to Redundant Power System/Advanced Redundant
Power System
19-inch rack or stand-alone mounting
For information about the software features of the Switch, refer to the
“SuperStack II Switch Management Guide”.
Switch 3300 SM Front View Detail 13
Switch 3300 SM
Front View Detail
Figure 1
Switch 3300 SM front view
10BASE-T/
100BASE-TX Ports
The Switch has 24 auto-negotiating 10BASE-T/100BASE-TX ports
configured as MDIX (cross-over). These ports can be set to 10BASE-T half
duplex, 10BASE-T full duplex, 100BASE-TX half duplex, 100BASE-TX full
duplex, or they can automatically detect the speed and duplex mode of a
link and provide the appropriate connection. The maximum segment
length is 100m (328ft) over Category 5 twisted pair cable.
As these ports are configured as MDIX (cross-over), you need to use a
cross-over cable to connect to devices whose ports are MDIX-only. See
Choosing the Correct Cables
on
page 30
for more information.
1000BASE-SX Port
The Switch has a Gigabit Ethernet Port that provides a 1000Mbps
connection to another Gigabit Ethernet device. This port uses 62.5
µ
m or
50
µ
m multimode fiber optic cable with MT-RJ duplex connectors.
LEDs
Table 3
(overleaf) lists the LEDs visible on the front of the Switch, and
their states according to color. For information on using the LEDs for
problem solving, see Solving Problems Indicated by LEDs
on page 31.
green
flashing green
= enabled, link OK
= disabled, link OK
10BASE-T / 100BASE-TX
Unit
3
3
4
4
6
6
5
5
7
7
8
8
9
9
10
10
11
11
12
12
1
1
2
2
3
5
1
4
7
6
8
2
13
13
14
14
15
15
16
16
17
17
18
18
19
19
20
20
21
21
22
22
23
23
24
24
SuperStack II
Switch 3300 SM
®
Power/Self Test
6x 7x
18x 19x
1x
13x
12x
24x
Packet
Status
Packet
Status
1000BASE-SX
10BASE-T / 100BASE-TX Ports
Port Status LEDs Power / Self Test LED
Unit LED
1000BASE-SX Port
14 C
HAPTER
1: I
NTRODUCING
THE
S
WITCH
3300 SM
Tab le 3
LED behavior
LED Color Indicates
Port Status LEDs
Packet Yellow Packets are being transmitted/received on the port.
Off No packets are being transmitted/received on the
port.
Status Green A link is present, and the port is enabled.
Green flashing A link is present, but the port is disabled.
Off No link is present.
Unit LEDs
18 Green The Switch forms a stack with other Switch units;
the LED indicates the position of the Switch in the
stack and that a link is present. Note that although
there are eight LEDs, only four Switch units can be
stacked at present.
Off The Switch is stand-alone.
Power/Self Test LED
Green The Switch is powered-up.
Green flashing The Switch is either downloading software or is
initializing (which includes running a Power On Self
Test).
Yellow The Switch has failed its Power On Self Test.
Off The Switch is not receiving power.
Switch 3300 SM Rear View Detail 15
Switch 3300 SM
Rear View Detail
Figure 2
Switch 3300 SM rear view
Unit Information
Label
This label shows the following:
The 3Com product name of the Switch
The 3Com 3C number of the Switch
The unique MAC address (Ethernet address) of the Switch
The serial number of the Switch
You may need this information for fault reporting purposes.
Power Socket
The Switch automatically adjusts its power setting to any supply voltage
in the range 90240V A.C.
Redundant Power
System Socket
To protect against internal power supply failure, you can use this socket
to connect a SuperStack II Advanced Redundant Power System (ARPS) to
the Switch. See Connecting a Redundant Power System
on page 29.
Matrix Port
Console
(max) 19200,8,1,N
Switch 3300 SM 24 Port
MAC Addr: XXXXXXXXXX
3C16987
Serial XXXXXXXXXXXX
Power Socket
Unit Information Label
Redundant Power System Socket
Console Port Matrix Port
16 C
HAPTER
1: I
NTRODUCING
THE
S
WITCH
3300 SM
Console Port
The console port allows you to connect a terminal and perform remote or
local out-of-band management. The console port uses standard null
modem cable and is set to auto-baud, 8 data bits, no parity and 1 stop
bit.
Matrix Port
The Matrix Port allows you to:
Stack the Switch with another unit in the Switch 1100/3300 family
using a single Matrix Cable
Stack the Switch with up to three other units in the Switch 1100/3300
family, when one of the units is a Switch 3300 MM unit
For more information about the role of the Matrix Port, see Stacking
Units on page 26.
Network Configuration Examples 17
Network
Configuration
Examples
The following illustrations show some examples of how the Switch can be
used in your network.
Switch 3300 SM as a
Segmentation Switch
The example in Figure 3
shows how a Switch 3300 SM stack can segment
a network of shared 10Mbps,100Mbps and 1000Mbps connections.
There is a 10/100 shared segment on each floor, and these segments are
connected to the Switch which is positioned in the basement. The Switch
3300 SM also provides a Gigabit Ethernet connection to a local server.
Figure 3
Using the Switch to segment your network
Dual Speed Hub 500
Dual Speed Hub 500
Endstations on shared 10Mbps
and 100Mbps connections
Endstations on shared 10Mbps
and 100Mbps connections
Endstations and servers on switched 10Mbps,
100Mbps and 1000Mbps connections
Local server on a shared
100Mbps connection
Local server on a shared
100Mbps connection
100Mbps
Switch 3300 SM stack
1000Mbps
18 C
HAPTER
1: I
NTRODUCING
THE
S
WITCH
3300 SM
Switch 3300 SM as a
Collapsed Backbone
Switch
The example in Figure 4
shows how a Switch 3300 SM stack can act as a
backbone for both shared and switched network segments.
Figure 4
Using the Switch as a collapsed backbone
Switch 3300 SM stack
Endstations on
switched 10Mbps
connections
Endstations on switched
10Mbps connections
Servers on dedicated
1000Mbps connections
Switch 1100
Switch 1100
Dual Speed Hub 500
Dual Speed Hub 500
Endstations on
switched 10Mbps
connections
Endstations on
shared 10Mbps
and 100Mbps
connections
Endstations on
shared 10Mbps
and 100Mbps
connections
100Mbps
Network Configuration Examples 19
Switch 3300 SM as a
Desktop Switch
The example in Figure 5
shows how a Switch 3300 SM can be used,
within a stack, for a group of users that require dedicated 10Mbps or
100Mbps connections to the desktop. The 3300 SM Switches provide a
Gigabit Ethernet connection to a SuperStack II Switch 9300 in the
basement and to a local server.
Figure 5
Using the Switch in a desktop environment
Switch 9300
Endstations on switched 10Mbps
or 100Mbps connections
Local server on a switched
1000Mbps connection
Switch 3300:
1000Mbps
MM
XM
SM
SM
20 C
HAPTER
1: I
NTRODUCING
THE
S
WITCH
3300 SM
Configuration Rules
for Fast Ethernet
The topology rules for 100Mbps Fast Ethernet are slightly different to
those for 10Mbps Ethernet. Figure 6
illustrates the key topology rules and
provides examples of how they allow for large-scale Fast Ethernet
networks.
Figure 6
Fast Ethernet configuration rules
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62

3com SuperStack II 3300 SM User manual

Category
Network switches
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI