BEA GS-1 User guide

Brand: BEA

Model: GS-1

Type: User guide

BEA GS-1

The BEA GS-1 is a compact gate sensor that uses microwave and microprocessor technology to detect motion. It has a detection area of 2.40 m (W) x 3.60 m (D) and a minimum speed detection of 5 cm/s. The sensor is powered by a 12V to 24V DC power supply and has a power consumption of less than 2W. It has an output transistor (open collector) with a maximum current of 60 mA and a voltage drop of 2 V at 10mA. The sensor has a temperature range of -20°C to +55°C and conforms to EMC 2004/108/EC. It measures 40 mm (W) x 30 mm (H) x 30 mm (D) and weighs 140g. The cable length is 1 m

BEA GS-1

The BEA GS-1 is a compact gate sensor that uses microwave and microprocessor technology to detect motion. It has a detection area of 2.40 m (W) x 3.60 m (D) and a minimum speed detection of 5 cm/s. The sensor is powered by a 12V to 24V DC power supply and has a power consumption of less than 2W. It has an output transistor (open collector) with a maximum current of 60 mA and a voltage drop of 2 V at 10mA. The sensor has a temperature range of -20°C to +55°C and conforms to EMC 2004/108/EC. It measures 40 mm (W) x 30 mm (H) x 30 mm (D) and weighs 140g. The cable length is 1 m

1/1

CGS-1

USER’S GUIDE

COMPACT GATE SENSOR

Sensitivity Potentiometer

Vertical angle: 0°

Mounting height: 1m

LED

- flashes for a few seconds after power-on.

- lights up when the sensor detects motion.

Wiring

GREEN Power supply (+)

BROWN Ground

WHITE Output transistor (open-collector)

Avoid

vibrations!

Do not cover

the sensor!

Avoid moving objects

in proximity of the

sensor!

Avoid HF lamps and

fluorescent lighting in

proximity of the sensor!

Do not remove the protection

which avoids contact with the

electronical parts!

Technology : microwave and microprocessor

Transmitter frequency : 24.175 GHz

Transmitter radiated power : <20 dBm EIRP

Transmitter power density : < 5 mW/cm²

Mounting height : from 0.8 m to 1.2 m

Detection area (mounting height = 1 m) : 2.40 m (W) x 3.60 m (D)

Detection mode : motion

Minimum speed : 5 cm/s (measured in the sensor axis)

Supply voltage : 12V to 24V DC +30% / -10%

Power consumption : < 2W (VA)

Output transistor (open collector)

Max. Current

Voltage Drop

: 60 mA

: 2 V @ 10mA

Temperature range : -20°C to +55°C

Norm Conformity

: EMC 2004/108/EC

Dimensions : 40 mm (W) x 30 mm (H) x 30 mm (D)

Weight : 140g

Length of cable : 1 m (max. 3m)

SYMPTOMS POSSIBLE CAUSES

CORRECTIVE ACTION

The gate will not open and no red LED lights up. The sensor power is off. Check the wiring and the power supply.

The gate opens and closes constantly. The sensor "sees" the gate

moving.

Increase the tilt angle and/or reduce the

sensitivity.

Closing the gate creates

vibrations picked up by the

sensor.

Ensure that the sensor is correctly fixed to avoid

vibrations.

42.0214 / V3 – 12.08

1 General Information

3 Troubleshooting

4 Technical Specifications

2 Installation Tips

+

The declaration of conformity and other technical documentation are available on our website or can be requested by phone or mail.

BEA S.A. - LIEGE Science Park – Allée des Noisetiers 5 – B-4031 Angleur - Tel: +3243616565 – Fax: +3243612858 – [email protected] - www.bea.be

1

BEA GS-1 User guide

Brand: BEA

Model: GS-1

Type: User guide

BEA GS-1

The BEA GS-1 is a compact gate sensor that uses microwave and microprocessor technology to detect motion. It has a detection area of 2.40 m (W) x 3.60 m (D) and a minimum speed detection of 5 cm/s. The sensor is powered by a 12V to 24V DC power supply and has a power consumption of less than 2W. It has an output transistor (open collector) with a maximum current of 60 mA and a voltage drop of 2 V at 10mA. The sensor has a temperature range of -20°C to +55°C and conforms to EMC 2004/108/EC. It measures 40 mm (W) x 30 mm (H) x 30 mm (D) and weighs 140g. The cable length is 1 m

Related papers

Other documents