Assembly Instruction
THANK YOU
We appreciate the trust and confidence you have on Sunjoy fire pit. We strive to continually create quality products designed to
enhance your home.
D-FT007PST
Questions, problems, missing parts? Please call at 1-866-578-6569
for US user or 1-844-SUNJOY1(1-844-786-5691) for Canada user
from 8 AM to 4:30 PM, Monday to Friday, Eastern time. You can
also send Email to [email protected]om for assistance
Table of Contents
Table of Contents .......................................................... 2
Safety Information ......................................................... 2
Warranty ......................................................................... 2
What is Covered ...............................................................2
What is Not Covered ........................................................2
Pre-Assembly ............................................................ 3-4
Tools Required...............................................................3
Hardware Included........................................................3
Package Contents...........................................................4
Assembly ...................................................................... 5
Care and Cleaning ........................................................ 6
Safety Information
PRECAUTIONS
alone.
1.
Some parts may contain sharp edges. Wear protective
gloves.
2.
When assembling and using this product, basic safety
precautions should always be followed to reduce the risk of
personal injury and damage to equipment. Please read all
instructions before assembly and usage.
NOTICE:
For outdoor use only.
Warranty
6 MONTH WARRANTY
WHAT IS COVERED
This limited warranty is extended to the original purchaser and applies to defects in materials and workmanship of your item
provided the item is maintained with care and used only for personal, residential purposes. The item is warranted to be free
from defects in material or workmanship for a period of 1 year.
2
In case of any malfunction of your SUNJOY Collection product (failure, missing part, etc.), please contact one of our
service technicians at our toll-free service line at 1-866-578-6569 for US user or 1-844-SUNJOY1(1-844-786-5691) for
Canada user from 8 AM to 4:30 PM, Monday to Friday, Eastern time. You can also send Email to
customer.care@sunjoydirect.com for assistance. The manufacturer reserves the right to repair or replace the defective
product, at its discretion
WHAT IS NOT COVERED
We do not reimburse for transportation of delivery costs, or compensate the individual or any outside party for assembling or
disassembling the product.
DANGER: This unit is heavy! Do not assemble this item
Planning Assembly ........................................................3
Pre-Assembly
If any part is missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
AA
CC
DD
EE
Part
Description
Quantity
AA
BB
CC
DD
EE
FF
M6 x 15 Bolt
12
4
M6 x 10 Bolt
M6 Flat Washer
M6 Nut
20
9
1
4
3
PLANNING ASSEMBLY
Before beginning assembly of this product, make sure all parts are present. Compare parts with the Hardware Included and
Package Contents lists.
BB
M6 Wrench
__FF
M6 x 25 Bolt
Pre-Assembly (continued)
PACKAGE
CONTENTS
Part
A
Description
Handle
Quantity
1
1
4
1
1
1
4
1
B
Screen
C
Support ring
Bowl
D
E
Upper ring
Bottom ring
Leg
F
G
H
Poker
4
Assembly
1
Connect the handle to the screen
□
Connect handle (A) and screen (B) by using nut (DD)
and
wrench (EE).
□
Put screen (B) on the bowl. Now, your fire pit is ready
to
use.
5
2 Connecting the legs to the rings
Attach leg (G) to the bottom ring (F) by using bolt (FF),
flat
washer (CC) and nut (DD). Do not tighten them fully.
And
then, attach leg (G) to the upper ring (E) by using bolt
(AA)
and flat washer (CC). Tighten all bolts with wrench (EE).
□
NOTE: To avoid destroying the finish, please handle it
with care.
NOTE: To avoid destroying the finish, please handle it
with care.
3
□
Assembling the support ring and
connect the bowl to the upper
ring
Connect support ring (C) and bowl (D) by using bolt (BB)
and flat washer (CC). Fully tighten by using wrench (EE).
4 Competing the assembly
Care and Cleaning
□
□
Before using, clean the fire pit completely with a soft dry towel.
When not in use, store in a cool, dry area.
6
/
