Sunjoy D-AW001 Assembly Instruction Manual

Brand
Sunjoy
Model
D-AW001
Type
Assembly Instruction Manual
Assembly Instruction
D-AW001
1.0 Awning Part List
1.1 Caution ..................................................................................................................... ..1
1.2 Safety Tips................................................................................................................ .2
2.0 Product Introduction
2.1 Main Function ............................................................................................................2
2.2 Awning Main Parts List ............................................................................................ .2
3.0 Installation
3.1 Installation of Wall Bracket ........................................................................................3
3.2 Installation of Awning ............................................................................................... ..4
4.0 Awning Operation
4.1 Fabric Cover .............................................................................................................. .5
4.2 Open & Close of manual-operated Awning ................................................................6
4.3
Motorized awning .................................................................................................. ..6
5.0 Maintenance ................................................................................................................. ..7
!
!
1.0 Part List:
(1) Awning
(2) Wall Brackets
(3) Crank handle
(4) Locking Bolts (M10x65), M10 Washers and M10 Nuts
(5 ) Anchors /expansion bolts (M10x70) & Wood lag bolts (M12x60).
1.1 Caution
Notice: Refer to usual notice.
Notice: To show the information of proper use to avoid damage on the products and
accident to the user.
3
!
1.2 Safety Tips
KNotice:
This product should not be used with wind over scale 5 (29-38km/h)
This product is to be used only for shade purposes, do not use to shelter from bad
weather.
Please close this product in bad weather, medium to high winds, heavy rain or snow. Do
not use in cold weather, may damage or affect product performance.
2.0 Product introduction
2.1 Main function:
1. Easily open and close, adjustable shading area;
2. Adjusting pitch angle for shade from 15-45degree
2.2 Awning Main Parts List:
1. Wall bracket 6. Valance
2. Gear box 7 . Crank handle
3. Back square bar 8 . Roller tube bracket
4. Fabric cover 9. Right arm
5. Front bar 10. Left arm
Level
Installation of equal wall
Motor (motorized awning)
3.0 Installation
3.1 Installation of wall bracket
Open packaging, remove wall bracket, anchor/expansion bolt, to install on wall or ceiling.
Notice: Please call a professional for assistance on installation for
walls other than wood or concrete.
Place anchors/expansion bolt or wooden bolt into the holes, install
the wall bracket and keep all brackets level, and tightly fasten
screws.
t
Expansion bolt
Wooden Wall
Square bar screw
Wall bracket
Concrete Wall
Expansion bolt
Square bar screw
!
3.2 Installation of awning
Remove awning, including all hardware from box;
Using two people lift the awning to the height of wall bracket, and slide the awning into wall
bracket, fasten screw and nut.
When installing wall bracket, the distance (L) between the wall bracket and shoulder
bracket should not be larger than 50mm.
Nuts
Bolt
Warning: Do not fix the screw too
tight, in case of the accident!
4.0 Awning Operation
4.1 Fabric cover
cover cover
correct way wrong way
!
4.2 Open and close manual-operated awning
Put the crank handle into gear box loop, Place hands on plastic handle and turn handle
clockwise to open awning.
4.3 Motorized awning:
Place crank handle into gear box loop, place hands on plastic handles, turn the
handle counter-clockwise to close awning.
Noticeğthe cover need to remain tight
when the awning is fully open
NoticeğWhen turning the crank
handle. make sure it Keeps in the same
straight line with loop.
correct way
wrong way
plastic handle
Notice: Do not turn screw B to
adjust angle before untightening
When adjusting angle, please hold
the screw A.
awning arm.
5.0 Maintenance
Awning should be maintained and inspected after one year of use. Please contact dealer if
there are any visible manufacturer defects.
Please keep manual in a safe place for future reference.
Please keep any and all awning related items out of the reach of children.
Check the cable regularly for signs of damage, please stop use until it is repaired.
When doing the inspection and maintenance, please make sure that the power supply is cut
off.
WARRANTY
(1-year warranty)
Thank you for purchasing this SUNJOY product. These products have been made to
demanding, high-quality standards and are guaranteed for domestic use against manufacturing
faults. This warranty does not affect your statutory rights.
In case of any malfunction of your SUNJOY Collection product (failure, missing part,
etc.), please contact one of our service technicians at our toll-free service line at
1-866-578-6569 in the US continent or 1-844-SUNJOY1(1-844-786-5691) in the Canada
Continent from 8 AM to 4:30 PM, Monday to Friday, Eastern time. You can also send
email to
customer.care@sunjoydirect.com for assistance. The manufacturer reserves
the right to repair or replace the defective product, at its discretion.
The product is guaranteed if used for normal trade purposes. Any warranty is invalid
if the product has been overloaded or subject to neglect, improper use or an attempted
repair other than by an authorized agent. Heavy-duty or daily professional/commercial
usage are not guaranteed. Due to continuous product improvement, we reserve the right to
change the product specifications without prior notice.
Made in China
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Sunjoy D-AW001 Assembly Instruction Manual

Brand
Sunjoy
Model
D-AW001
Type
Assembly Instruction Manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents