2. Computers & electronics
  3. Telecom & navigation
  4. Screen protectors
  5. Zagg
  6. 200102249

Zagg 200102249 User guide

  • Hello! I am an AI chatbot trained to assist you with the Zagg 200102249 User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
REMOVE TAB 2
To apply your InvisibleShield Ultra Privacy, read and
follow these instructions. For best results, please view the
application video at zagg.com/installation
InvisibleShield Application Instructions
Step 3: Apply Screen
Protection
Step 1: Prepare Your Device
Inside
Step 2: Align and Activate
Dust Removal Layer
Remove tab 1 and align the
InvisibleShield to the top
speaker and sides of the
phone. Start at the top of
the screen and run the
squeegee down and over
the InvisibleShield. This will
activate the built-in static
dust removal layer.
REMOVE TAB 1
Lift the top half of the screen
protector labeled "2" while
maintaining alignment with
the bottom half. Starting just
below the lifted top half, run
the squeegee up to the top of
the screen, simultaneously
applying the screen protector
and removing the protective
backing labeled "2."
Clean your screen thoroughly,
even if it just came out of the
box. Start with the wet wipe,
followed by the microfiber
cloth. Use the included dust
removal sticker to remove
any remaining lint or dust.
Step 4: Push Out Bubbles
Push any remaining
bubbles to the sides of the
phone using the squeegee
and your fingers.
Step 5: Press Down
the Sides
Step 6: Finish
Use your thumb to press the
sides of the InvisibleShield
down on the curved edges of
the phone.
Carefully peel off tab “4” to
remove the top protective layer.
*Any micro bubbles should
disappear within 24-48 hours.
REMOVE PROTECTIVE
LAYER
PEEL BACK TAB 3
Starting at the midpoint,
where you started last time,
lift the lower half of the
screen protector labeled "3"
and squeegee down to the
bottom of the screen. This
will simultaneously apply the
screen protector and remove
the protective backing
labeled "3."
Instructions | InvisibleShield | Ultra Privacy
PROJECT: Ultra Privacy
DIMENSIONS: 70mm x 130mm
BLEED: 3mm
CREATIVE/PRODUCTION ARTIST: Megan Pace
PM: Jordan M
REQUESTER: Max
DATE: May 23, 2019
REV: C
COLORS: SPECIAL INSTRUCTIONS:CMYK +
PANTONE Cool Gray 10 C
ARENA: 314-00291
English
™
WWW.ZAGG.COM
801.263.0699
NASDAQ : ZAGG
314-00291 REV C
Outside
*Shipping charges may apply
Get the Limited Lifetime Warranty by registering your
InvisibleShield at zagg.com/register.
If your InvisibleShield ever gets scratched, torn or
damaged while protecting your device, we’ll replace
it for as long as you own your device
*
.
When you register your InvisibleShield, you qualify
for exclusive email offers, new gear, and more. You’ll
be the first to hear about our new product updates
and special sale previews.
Register Your InvisibleShield Online
Get the Benefits of Ownership
Get the Most Out of
Your InvisibleShield
LIMITED LIFETIME WARRANTY
Connect with us @InvisibleShield
/