Duramax Building Products 00384 Operating instructions

Type
Operating instructions

Duramax Building Products 00384 is a storage shed designed to provide secure and convenient storage for a variety of items. With its spacious interior and durable construction, this shed is perfect for storing tools, equipment, and other belongings. The shed is made of high-quality materials and is built to last, so you can be sure that your belongings will be safe and protected from the elements.

Some of the key features of the Duramax Building Products 00384 storage shed include:

*Spacious interior: The shed has a large interior that provides ample space for storing a variety of items. *Durable construction: The shed is made of high-quality materials and is built to last.

Duramax Building Products 00384 is a storage shed designed to provide secure and convenient storage for a variety of items. With its spacious interior and durable construction, this shed is perfect for storing tools, equipment, and other belongings. The shed is made of high-quality materials and is built to last, so you can be sure that your belongings will be safe and protected from the elements.

Some of the key features of the Duramax Building Products 00384 storage shed include:

*Spacious interior: The shed has a large interior that provides ample space for storing a variety of items. *Durable construction: The shed is made of high-quality materials and is built to last.



Custe
eie tie
00 3
A 1
AMB   X 
A 2
A X   X 
te F sed it etesi use tis u .

 MAA 

ie  Ft   Ft
it tesi its
Stoge Shed
Stoge Shed
Building imensions (ne tension) :
Aroimate
ie
torage Area
. Ft.
Cu. Ft.
terior imension
 Roof de to Roof de 
Interior imension
 all to all 
idt et eigt idt et eigt
8  2 12
20
105 12
94 38
31 73 92 14 31 63 38
Feet
 inc   inc   inc   inc   inc   inc 

RR



T
ST
R

u t uti  Mitee Fee tge eds.
Aie its




Patent 416.091
urama torage ed
imited ifteen ear arranty
U.S. Polymer Inc. ill send a relacement art free of care, in te event of material defects and or
ormansi for a eriod of fifteen years from te date of rcase.
is arranty is etended only to te oriinal rcaser. A rcase receit or oter roof of date of oriinal
rcase ill be reired before arranty service is rendered. In no event sall e ay te cost of floorin,
labor, installation or any oter costs related tereto.
is arranty only covers failres de to defects in material or ormansi ic occrs drin normal
se and does not etend to color cane arisin de to normal eaterin or to damae resltin from
misse or nelect, commercial se, failre to follo assembly instrctions and te oners manal incldin
roer ancorin of te sed, aintin, forces of natre and oter cases ic is beyond or control.
Claims nder tis arranty mst be made itin te arranty eriod by callin 1-800-483-4674 or mail in
a dated sales sli and clear otora of te art to
U.S. Polymers Inc.
1057 S. Vail Ave
Montebello,CA 90640.
e reserve te rit to discontine or cane comonents. If a comonent as been discontined or is
not available, U.S. Polymers, Inc. reserves te rit to sbstitte a comonent of eal ality as may be
comatible.
imits and clusions
ere are no eress arranties ecet as listed above. e arrantor sall not be liable for incidental or
conseential damaes resltin from te se of tis rodct, or arisin ot of any breac of tis arranty.
All eress arranties are limited to te arranty eriod set fort above. Some states do not allo te
eclsion or limitation on o lon an imlied arranty lasts, so te above limitations may not aly to yo.
is arranty ives yo secific leal rits and yo may also ave oter rits ic vary from state to
state and contry to contry.

C C 
 RTT
R RTRT
 S
 T
 RT
 
 RR
 TR
R RTR
 RTTR
 STR
 TRSRT
 TR
 RTRSSTR
RS RSRSTRTR
RS RSRSTRTR
RS RSRSTRTR
RS RSRSTRTR
RS RSRSRTTR
RS RSRSTRTRS
RS RSRSTRTRSSRT
 SRT
RS RSRSTRTRSRT
RS RSRSTRTRSRTSRT
RS RSRSTRTRSRT
RS SSRT
S RSTRRT
S S
 T
R RT
R R
RRS RR
 TR
R RTR
S RTS
   Parts ist

R
S
S



T

S
S

Tools ou ill eed
MI CM (CMB)
Cannels (B1B)(B1RB)
(B21) (B22) (B2B)
RF TRCTR (RB)
RF TRCTR (R  1XB
3B B B)
(CB 1B 2B 3B 3XB 4B) (M)
PC  R IT
(R)
RF PI (PI)
 P AR (P)
RF PPRT (R2B)
(R1B)
RF PPRT (R4XB)
(R11B) (R12B)
R CM FITTI
(FC)
R CM FITTI
(FCR)
CRR CM
FITTI
(FCC)
ACCRI
C C 
 RTTT
R RTTRT
 RRTT
 TT
 TRTT
R RT
 RSR 
 R 
S SR
 TRR
S 
STTSR 
S 

STTSR
S 
STTSR
FT R CM
(CB)
CRR CM (CCB)
RIT R CM
(CRB)
R TPPR ()
AI PPRT (R14B)
MI CM FITTI
(FMC)
CTR BA CR
(CBC)
CTR BA FITTI
(FCB)
RF P IT
AR (PP)

0
ote
8’ x 6’ Exploded View
RS5
DL
DR
FPRB
FPLB
CMB
CCB
B2B
CCB
RS5
FPLB
FPRB
RS10B
RS10B
RS4XB
RS3B
RS3B
RS5B
RS4XB
CCB
CCB
B1LB
B1RB
B21
B22
B2B
CDLB
CDRB
CMB
CMB
CMB
CB2B
CB2B
CB1B
CB1B
CB3XB
RS11B
RS5B
RS2B
RS2B
RRS
RS2B
RS2B
DSH
CB4B
CB4B
FSP
FSP
RP
RP
RP
RP
CB3B
RS1XB
RS1XB
MJ
RS9B
RS8B
MJ
RS12B
RRS

C C 
T TST
TR TSRT
 
 TR
RSS RSRSTRTRSRT
RS RSRSTRTR
RS RSRSTRTR
RS RSRSTRTR
RS RSRSTRTRSRTSRT
RS RSRSTRTRSRT
RS RSRSTRTR
RS SSRT
S S
R R
RRS RR
ne tension Parts ist
MI CM (CMB)
Cannels (XT)
(XTR)
RF TRCTR
(RB) (RB) (R13B)
RF TRCTR
(R3B) (CB3B)
RF PI (PI)
RF PPRT (R4B)
(R11B)
(R12B)
ACCRI
C C 
 TT 
 RSR 
 R 
S 
STTSR 
S 
SRTT 
AI PPRT (R14B)
MI CM FITTI
(FMC)
RF P IT
AR (PP)
Exploded View with One Extension
CB3LB
CB3LB
EXTL
EXTR
CMB
CMB
RS4B
RS4B
RS7B
RS3SB
RS11B
RS12B
RS3SB
RS13B
RS13B
RS13B
RS13B
RS13B
RS6B
A. Foundation & Base Frame
1. Use ressre treated ood stds 2  45  10cm
to bild a fondation strctre tat as an otside
dimension of 65  96 1651mm2438.4mm.
3. Start it Cannel bases (B21) & (B22) to insre a
ic and accrate layot.
Position all bases (B1B B1RB B2B) on ood
fondation. It is critical tat yo allo 1 14 (1mm)
beteen front bases (B1RB) and (B1B) for door
lacement. Measre in all directions as son in fi.1.
Mae sre te U-cannel assembly is a erfect sare.
uraMa must be installed on a leel wooden latform
or a leel concrete foundation.
e folloin are a list of lmber and sies yo ill need.
2. Usin eterior rade CD 34 19mm lyood, ct
and fit toeter te seets to form solid lyood floor as
son. ondation mst be sare and level.
ooden Platform ot Inclded


ooden platform is etra and is not included.
ont install under ind conditions.
Parts needed:
ote
1 tn. U cannel left 
1 tn. U cannel rit R
6 Dia. 4.2  16mm Scres S1
Parts needed For ac tension:
e folloin are a list of lmber and sies yo ill need.
ooden Platform for ac tension (ot Included)
Pressure Treated  ood tuds: terior rade (CX):
2ea 2489 50  88.9  2260.6mm 34 19mm lyood
2ea 2432 50  88.9  812.8mm 1ea 34  32  96
19812.82260.6mm
Brackets: 4ea
Pressure Treated  ood tuds: terior rade (CX):
4ea 2  4  89 50  88.9  2260.6mm 34 19mm lyood
2ea 2  4  65 50  88.9  1651mm 1ea 34  48  96
19  1219.2  2438.4mm
1ea 34  17  96
19  431.8  2438.4mm
Brackets: 4ea
3a. or eac etension add one (XT) & (XTR) in
te bac side, movin (B21) & (B22) bacards.
1 U cannel ront left 1
1 U cannel ront rit 1R
1 U cannel ac 21
1 U cannel ac 22
2 U cannel Side 2
22 Dia. 4.2  16mm Scres S1
1a. Use ressre treated ood stds 2  45  10cm
to bild a fondation strctre tat as an otside
dimension of 32  96 812.8mm  2438.4mm for eac
etension.
(11mm)
BRACT
(243.4mm)
BRACT
BRACT
11 12 (22.1mm)
2 (mm)
1 12 (4.3mm)
BRACT
32 (12.mm)
 (243.4mm)
1 (431.mm)
4 (121.2mm)
32 (12.mm)
eft ide
Rigt ide
oor ening
1 14 (1mm)
B1B
B2B
B21
B22
B2B
X
X
PART : Asseing Shed ith Extension Kit
a 2 4 (cm  1cm) Flat
ote
R 1b. Use ressre treated ood stds 2  4
5  10cm to bild a fondation strctre tat as an
otside dimension of 97  96 2463.8mm 
2438.4mm for sed wit one etension.
B1B
2 14 (2343mm)
2 14 (2343mm)
2 14 (2343mm)
2 14 (2343mm)
2 14 (2343mm)
2 14 (2343mm))
Fig.1
Foundation tructure
Plwood Floor
Cannel aout
Parts eeded: Parts eeded For ac tension:
 CCB
 CB
R CB
 CMB
S 
S F
 CB1B
S CB2B
 CB3B
 CB3XB
 CBB
S M
 FCB
 CBC
1.Slide rit door column (CRB) into te Cannel
Base (B1RB) on te rit side of te door. ine  te
re-drilled oles on (CRB) Column it re-drilled
oles on Cannel Base. Secre it to 1
scres from inside.
See blo detail fig.1
4. Usin a carenters sare, line  all corners.
Secre base to ood fondation sin 1) scres
B. alls & Columns


X
B22
fig.1
1
side
ote
B1B
CB
CB
B1B
 CMB
S 
 CB3B
igt
CB
Concrete foundation
4b. Sed or sed fondation sold be laced on
concrete footin by se of ancor bolt and nt.
Usin a carenters sare, line  corners. Alin
Cannel base mar te concrete tro te
oles in te base and drill concrete it 12 dia.
12.5mm concrete bit to accet ancor bolts to a 1
34 44mm det. Relace base and secre it
14  1 12 M6  40mm ancor bolts.
Ancor bolt for asic Sed - 22os. not rovided
ac tension - 6os. not rovided
4

las place panels into frame at an
angle on top and slide in sideas and
donard for eas insertion.
2. Insert te front side anel (FP ) into te roove
of column (CRB). Start at te bottom of te anel at
an anle ten s into lace.
utside
1
3. Slide corner column (CCB) into side anel
(FP ) sin te colmn to te side anel.
4. orin otside se 1scres to secre
colmn to bases (B1RB) and (B2B).
ote
ake sure panels are right side up
ith panel shingles facing don.
Check the stamped label on top.
of all panels.
ote
CCB
B1B
B2B
F
Inside
F
C
B1B
CB
CB
F
F
CCB
Inside
F
CCB
5.o stabilie te front anel attac te front center
band rigt (CB1B). Start it te center band
fitting. i to corner colmn (CCB) it 2scres.
o contine See fires (fig.1) (fig.2) and (fig.3).
4
Ti



CB1B
Inside
CCB
CB
B1B
CBB
CB1B
13
2
6. Attac center band (CB4B) to door colmn
(CRB) and base cannel (B1RB).
Fig.2: Use
1scre.
i CB4Bto
base (B1RB)
CBB
B1B
Fig.1: Use 1scre.
i CB4Bto (CRB)
CB
CBB
CB1B
Fig.3: Use 1scre.
i CB1Bto (CRB).
Fig.2: Use 1scre.
i CB1Bto FCB.
Fig.1: Use 2scre.
i FCBto CCB.
eave it loose.
CB1B

CBB
Fig.3: i te (P) at te end
of (CB1B) (CB4B).
CBB
Inside
CB1B
CB
CCB
3
12
F
CB1B
CB
CCB
CB1B
FCB
CCB
FCB
2
1
1
1
1

For Center Band Roof structure (R3B) & (R3B).
erlaing Metod
te 2
te 
te 4
TIP
te 1
te 3
Use a hammer to
align the holes.
M
CB3XB
M
7. Assemble back center bands (CB3B) and (CB3XB) it middle
oining suort (M). Use (1) scres.
CB3B
CB3B
CB3XB
CB2B
CB3B
1
8. Assemble te center bands (CB2B)(CB3B) it (3) scres it nts. ollo verlain Metod
son belo.
Make 2 sets.
Add one (CB3B) for eac etension.
3
CCB
X
B22
11. orin from otside se (1) scres to
secre te colmn to bases (B22) and (XTR).
X
CCB
utside
1
B22
9. orin from inside, contine connectin te side
anels (P ) and columns (CMB) in seence alon
(B2B) & (XTR) base. Use 1 scres to fi columns
to base.
Inside
B2B
CMB
CMB
CMB
1
X
Inside
9a. or eac etension add one side anel (P ) and
one middle column (CMB) in etension base U-cannel
(XTR) & (XT).
10. Slide corner column (CCB) into side anel (P )
sin te colmn to te side anel.
CCB
Fig.4: Use 1
scres. i (CB3B)
to (CMB) columns.
12. Stabilie te side anels it center bands (CB3B)
(CB2B). i te center band fittin (FCB) to corner
colmn (CCB) See Fig.1
ollo te Fig. 2 3 4 & .
Fig.3: i to (CMB)
it (1) scre.
CMB
CB3B
CB2B
CMB
CB3B
CB2B
CB3B
CMB
B2B
CCB
CB3B
X
Inside
CB2B
Fig. 2 : Use (1) scres.
i (CB2B) to (FCB)
and (CB1B).
Fig.1: Use (2)
scres. i (FCB)
to (CCB). eave it
loose.
Fig.: Use (1)
scres. i (CB3B)
to (FCB).
CB2B
CCB
FCB
CCB
FCB
CB3B
2
1
1
1
1
14. i te corner column (CCB) to last anel and
base.
15. orin from otside se (1) scres to secre
te corner colmn (CCB) to bases (B21) and (XT).
13. Contine connectin te bac anels and columns
in seence alon base (B22) and (B21). i colmns to
base it 1 scres.
CMB
CMB
CCB
B21
CCB
X
1
CMB
1
B22
B21
Back all
  

CCB
CMB
CCB
B21
X

Inside
utside
16. Stabilie te side anels it center bands CB3B & CB3XB. i te center band fittingFCBto corner
columnCCBsee figure 1. ollo fires 2 3, 4 and .
CMB
B21
CCB
CB3XB
B22
CB3B
1
4
3 &
2
CB3X
B
CB3B
Fig. 2: Use (1) scres.
i (CB3B) to (FCB)
and (CB2B).
Fig.1: Use (2)
scres. i (FCB)
to (CCB). eave it
loose.
Fig.: Use (1)
scres. i (CB3XB)
to (FCB).
Fig.4: i to (CMB)
it (1) scres.
CB3B
CCB
FCB
CCB
FCB
CB3XB
CMB
CB3XB
Fig.: Center band oint
mst be cover it (CBC)
cover to avoid te inry.
CB3B
CMB
CBC
Fig.3: i to (CMB)
it (1) scre.
CB3B
CMB
CB3XB
CB3XB
2
1
1
1
1
0
19. orin from otside se (1) scres to
secre colmn to bases (B2B) and (B1B).
18. Slide corner column (CCB) into side anel (P )
sin te colmn to te side anel.
B2B
CCB
utside
1
B1B
17. orin from inside, contine connectin te side
anels (P ) and columns (CMB) in seence alon
(B2B) & (XT) base. Use 1 scres to fi columns to
base.
Inside
X
CMB
CMB
CMB
1
B2B
B1B
CCB
B2B
B1B
Inside
CCB

Fig.3: Use 1
scres. i (CB3B)
to (CMB) columns.
20. Stabilie te side anels it center bands (CB3B)
(CB2B). i te center band fitting (FCB) to corner
column (CCB). See Fig.1
ollo te Fig. 2 3 4 & .
Fig.4: i to (CMB)
it (1) scre.
Inside
CMB
B22
CCB
CB2B
X
CB3B
CB2B
CB3B
CMB
CB3B
CMB
CB3B
CB2B
Fig.2: Use
(1) scres. i
(CB3B) to (FCB)
and (CB3XB).
Fig.1: Use (2)
scre. i (FCB)
to (CCB). eave
it loose.
Fig.: Use
(1) scre.
i (CB2B) to (FCB).
CCB
FCB
CB2B
CB1A
FCB
CB3B
CCB
FCB
CB3XB
2
1
1
1
1
23. Attac te center band (CB1B) to door
column corner column and center band
(CB2B). See fires 1 and 2.
21. Insert te side anel (FP ) into te roove
of column (CCB). Start at te bottom it anel at
an anle ten s into lace.
22. Slide door column (CB) into te Cannel
Base (B1B) on te left side of te door. ine  te
re-drilled oles on (CB) Column it re-drilled
oles on Cannel Base (B1B). Secre it to
1 scres from inside.
see blo detail.

CB
CCB
CB1B
CCB
B1B
CB
B1B
1
CB
Fig.2: Use
1scre.
i CB1Bto
(CB)
CB
CB1B
B1B
2
1
F
ote
After comletin te center band assembly flly titen
te for center band fittins (FCB) to te corner colmn
(CCB).
CB
Fig.1: Use (1) scres.
i (CB1B) to
(FCB) and (CB2B).
CB2B
CB1B
FCB

Inside
CCB
B1B
B1B
CCB
F
F
1
1
Inside

CB
CCB
CB1B
Inside
Fig.1: Use
1scre.
i CB4Bto
(CB)
Fig.2: Use
1scre.
i CB4Bto
base (B1B)
CBB
CB
CBB
CB1B
B1B
CBB
B1B
1
3
2
24. i te center band (CB4B) to (CB) and base (B1B).
ee Fig. 1 2 and 3.
Fig.3: i te (P)
at te end of
(CB1B) (CB4B).
25. Mae sre te door oenin beteen te door
columns (CB) and (CRB is 1 14 (1mm).
is ill ensre a erfect fit for te doors.
C. Roof Frame
Parts eeded:
RSRS 1XB
RSRS 2B
RSRS 3B
RSRS XB
RSRS B
RSRSS B
RSRSSS B
S M
RSRSS 10B
RSRSSS 11B
RSRSS 12B
S 
 FC
R FC
 FCC
 FMC
 

Parts eeded For ac tension:
RSRSS 3B
RSRS B
RSRS B
RSRS B
RSRSSS 11B
RSRSS 12B
RSRS 13B
 FMC
CB
CB
1 14
oor ening
1mm
1
1

CB1B
CB
CBB

4
CB
CB
FMC
FMC
FMC
FMC
FMC
CMB
CMB
CMB
CMB
CMB
CMB
FCC
CCB
FCC
FCC
FCC
CCB
CCB
CCB
FC
FC
3. Insert te door column fittings (FC) and (FCR)
left and rit into te door columns (CB) and
(CRB). i it 1) scres from inside te sed.
1. Insert te middle column fitting (FMC) into
to of te middle columns (CMB). i te
colmn to fittins it (1) scres from inside
te sed.
2. Insert te corner column fittings (FCC) into
te corner colmns (CCB). i it (1) scres
from ot side of te sed.
CCB
1
FCC
FC
FMC
Inside
1
Inside
CMB
CMB
FCC
CCB
1
FMC
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47

Duramax Building Products 00384 Operating instructions

Type
Operating instructions

Duramax Building Products 00384 is a storage shed designed to provide secure and convenient storage for a variety of items. With its spacious interior and durable construction, this shed is perfect for storing tools, equipment, and other belongings. The shed is made of high-quality materials and is built to last, so you can be sure that your belongings will be safe and protected from the elements.

Some of the key features of the Duramax Building Products 00384 storage shed include:

*Spacious interior: The shed has a large interior that provides ample space for storing a variety of items. *Durable construction: The shed is made of high-quality materials and is built to last.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI