ZTE H220N User manual

ZTE
Brand
ZTE
Model
H220N
Category
Networking
Type
User manual

This manual is also suitable for

NO.55, Hi-Tech Road South,Shenzhen, P.R.China
Postcode:518057
Technical Support Website: http://support.zte.com.cn
Customer Support Center:
E-mail: support@zte.com.cn
ZXV10 H108L
Home Gateway
User Manual
Version 1.0
LEGALINFORMATION
Copyright©2010ZTECORPORATION.
Thecontentsofthisdocumentareprotectedbycopyrightlawsandinternationaltreaties.Anyrepro-
ductionordistributionofthisdocumentoranyportionofthisdocument,inanyformbyanymeans,
withoutthepriorwrittenconsentofZTECORPORATIONisprohibited.Additionally,thecontentsof
thisdocumentareprotectedbycontractualcondentialityobligations.
Allcompany,brandandproductnamesaretradeorservicemarks,orregisteredtradeorservice
marks,ofZTECORPORATIONoroftheirrespectiveowners.
Thisdocumentisprovided“asis” ,andallexpress,implied,orstatutorywarranties,representations
orconditionsaredisclaimed,includingwithoutlimitationanyimpliedwarrantyofmerchantability,
tnessforaparticularpurpose,titleornon-infringement.ZTECORPORATIONanditslicensorsshall
notbeliablefordamagesresultingfromtheuseoforrelianceontheinformationcontainedherein.
ZTECORPORATIONoritslicensorsmayhavecurrentorpendingintellectualpropertyrightsorappli-
cationscoveringthesubjectmatterofthisdocument.Exceptasexpresslyprovidedinanywritten
licensebetweenZTECORPORATIONanditslicensee,theuserofthisdocumentshallnotacquireany
licensetothesubjectmatterherein.
ZTECORPORATIONreservestherighttoupgradeormaketechnicalchangetothisproductwithout
furthernotice.
UsersmayvisitZTEtechnicalsupportwebsitehttp://ensupport.zte.com.cntoinquirerelatedinfor-
mation.
TheultimaterighttointerpretthisproductresidesinZTECORPORATION.
RevisionHistory
RevisionNo.RevisionDateRevisionReason
R1.120100325Abridgedversion
R1.020100118FirstEdition
SerialNo.SJ-20100115161948-001
PublishingDate:20100325
1
1 1
1
Safety Safety
Safety
Instructions Instructions
Instructions
DuringInstallationandApplication
lUsethepoweradapterdeliveredwiththeproduct.Otherpoweradaptermaymakethe
deviceunabletoworknormallyorevendamagethedevice.
lCheckloadcapacityofpowersocketandpowercable.Overloadingofpowersocketor
brokenpowercablemaycauseanelectricshockorre.Itisrecommendedtocheckcables
periodicallyandreplacethebrokenoneimmediately.
lAppropriatespaceforheatdissipationisrequiredtopreventtheproductfromoverheating.
lKeeptheproductawayfromheatsources.Donotexposethedevicetohightemperature
environmentanddirectsunlight.
lKeeptheproductawayfrommoistureorvapor.Donotsplashanyuidontheproduct.
lDonotplacetheproductonanyunstablesurface.
lSwitchOFFandunplugthisproductcarefullywhenitisnotinuseorbeforecleaning.Pay
attentiontothehightemperatureonthesurfaceofthetransformer.
lDelaybetweenswitchingOFFandswitchingONshouldbemorethan3seconds.
lDonotblocktheheatdissipationopeningoftheproduct.
lWhentheproductisnotusedforalongperiodoftime,unplugthepowercord.
lWatchoutthechildrenespeciallywhentheyareusingthedevicewithoutanycustody.
lIfanyabnormalphenomenonappearonthisproduct(suchassmoke,weirdsoundand/or
smell),unplugthepoweradapter.
lDonotusethedeviceinthethunderstorm.
ForService
Donotattempttodisassemble,repair,oropenthisproduct,whichwillcauseyoulosethewar-
rantyservices.Contactqualiedservicepersonnelincaseofproblems,especiallyunderthe
followingconditions:
lThepowersocketorcableisdamaged.
lLiquidissplashedintotheproduct.
lTheproductisexposedtorainorwater.
lTheproductdoesnotworknormallywhentheoperatinginstructionsarefollowed.
lTheproductisdroppedorstruck,causingtheproductdamaged.
2
2 2
2
Introduction Introduction
Introduction
2.1Product Product
Product
Overview Overview
Overview
ThankyouforusingZXV10H108L(hereafterreferredtoasH108L)HomeGateway.
H108LcanserveasthecenterofahomenetworkwherevariousdevicescansharetheInternet
connectiontoprovidedata,communication,andentertainmentservices.
Thedeliveryofservicesneedsthesupportoflocaloperators,contactlocaloperatorsformore
information.
2.2Introduction Introduction
Introduction
to to
to
Indicators Indicators
Indicators
IndicatorsonthefrontpanelareusedtoshowthestatusofH108L,whichisshowninthegure
below.
Indicatorsonthefrontpanelaredescribedinthetablebelow.
IndicatorStatusDescription
Constantly
on
Thepowerisconnectedandswitchedon.
Power
Off
Thepowerisnotconnectedorthedevicefailsto
function
FlashingThedeviceisfunctioning.
Run
OffThedevicefailstofunction.
Constantly
on
TheconnectionisestablishedandtheIPaddressis
allocated.
FlashingDataisbeingtransmitted.
Internet
Off
Thefollowingproblemsmaybepresent:
lThesystemisnotpoweredon.
lADSLconnectionisnotestablished.
lTheIPorPPPsessionisterminatedduetoa
reasonotherthanIdleTimeout.
lADSLisinthebridgemodeonly.
Constantly
on
ADSLconnectionisestablished.
FlashingADSLconnectionisbeingestablished.
DSL
OffADSLconnectionisnotestablished.
3
IndicatorStatusDescription
Constantly
on
LANconnectionisestablished.
FlashingDataisbeingtransmitted.
LAN1–LAN4
OffLANconnectionisnotestablished.
OnWLANRFisswitchedon.
FlashingDataisbeingtransmitted. WLAN
OffWLANRFisswitchedoff.
On
WPSisswitchedonandfunctioning.Theindicator
willturnoffinfiveminutes.
Slowly
flahsing
NegotiationisinprocessthroughWPS.
FastflashingWLANterminal’sWPSaccessencounteredanerror.
WPS
OffDevicefailureornotinuse.
OnUSBstoragedeviceconnected.
Flashing
IdentifyingUSBstoragedevicesorperformingdata
read/write.
USB1/USB2
OffNon-USBstoragedeviceconnected.
Notes:
ThequantityofUSBindicatorsrangesfrom0to2dependingontheactualproduct
model.
2.3Introduction Introduction
Introduction
to to
to
Sockets Sockets
Sockets
and and
and
Buttons Buttons
Buttons
lSocketsandbuttonsontherearpanelofH108L
ThesocketsandbuttonsontherearpanelofH108Lareasfollows:
ThedescriptionofsocketsandbuttonsontherearpanelofH108Lisasfollows:
NameFunctionDescription
PowerPowersocket
ConnectstostandardpoweradaptertoobtainDC
powersupply.
ResetResetbutton
Whenthedeviceisoperating,keeppressingthe
buttonformorethan5secondstorestorethedefault
settings.Thenthesystemrestartsautomatically.
4
NameFunctionDescription
LAN1–LAN4
Ethernet
ports
ConnectstoPC’snetworkadapterorothernetwork
deviceviaRJ-45cable.
DSLDSLsocket
ConnectstoADSLcableorsplitterviaRJ-11
telephoneline.
lSocketsandbuttonsonthesidepanelofH108L
SocketandbuttonsonthesidepanelofH108Lareasfollows:
ThedescriptionofsocketsandbuttonsonthesidepanelofH108Lisasfollows:
NameFunctionDescription
On/OffPowerswitchSwitchesonoroffpowersupply.
WLANWLANRFswitch
keeppressingthebuttonformorethan5seconds
toswitcheonoroffWLANRF.
WPS
WPSaccess
switch
SwitchesonoroffWPSaccess.
USB1/USB2USBportConnectsUSBstoragedevices.
Notes:
ThequantityofUSBportsrangesfrom0to2dependingontheactualproduct
model.
3 3
3
Installation Installation
Installation
3.1Installing Installing
Installing
Device Device
Device
Appropriatespaceforheatdissipationisrequiredtopreventthedevicefromoverheating.Do
notplacethedeviceclosetoheatsourcesorunderdirectsunlight.Donotblocktheheatdis-
sipationopening.
1.Placement:Placethedeviceataplacewhereitssurfaceisplaneandwheretherewillbe
lessobstacleswhencommunicatingwiththewirelessterminalstoensurethebestsignal
strength.ItisrecommendedtousewirelessterminalsintheroomwhereH108Lisplaced
ortheimmediateroom.
2.H108LadoptstheADSLuplinkmodetogetconnectedtotheInternet.Itisrecommended
toconnectthedeviceastheapproachshowninthefollowinggure.
5
3.Ifatelephoneisrequiredtobeinstalledbeforethesplitter,makesuretoconnectavoice
lterproperlytotheLinesocketofthesplitter,andthenconnectthetelephonetothelter.
Connectothersocketsastheabovegure.
Notes:
Pleaseusethepoweradapterdeliveredwiththedevice.Otherwisethedevice
mightbedamaged.
3.2Setting Setting
Setting
Preparations Preparations
Preparations
3.2.1Checking Checking
Checking
PC PC
PC
Settings Settings
Settings
ItisrecommendedtoturnoffVPNandrewallsonyourPC.
ThefollowingusesMicrosoftIEasanexampletointroducethestepstodisableIEproxyservice.
1.Select[Tools→InternetOptions]inthebrowser.ThentheInternetOptionswindowpops
up.
2.IntheInternetOptionswindow,selectConnectionstabandclickLANSettings.
3.UncheckUseaproxyserverforyourLANinthepop-upwindow.ThenclickOKtosubmit.
3.2.2Configuring Configuring
Configuring
TCP/IP TCP/IP
TCP/IP
ThefollowingusesWindowsXPasanexampletointroducethestepstocongureTCP/IP .
1.IntheWindowstaskbar,select[Start→ControlPanel].
2.IntheControlPanelwindow,double-clickNetworkConnection.
3.IntheNetworkConnectionwindow,right-clickLocalAreaConnection.Inthepop-up
menu,clickProperties.ThentheLANPropertiesdialogboxpopsup.
4.SelectInternetProtocol(TCP/IP)andclickProperties.ThentheInternetProtocol
(TCP/IP)Propertiesdialogboxpopsup.
5.TherearetwoapproachestocongureTCP/IP .However,therstapproachisrecom-
mended.
6
lFirstapproach:AcquireanIPaddressautomaticallyfromH108LviaDHCP .
a.IntheInternetProtocol(TCP/IP)Propertiesdialogbox,checkObtainanIPad-
dressautomanticallyandObtainDNSserveraddressautomatically.
b.ClickOKtosaveconguration.
lSecondapproach:SpecifyastaticIPaddressforPC.
a.IntheInternetProtocol(TCP/IP)Propertiesdialogbox,checkUsethefollowing
IPaddresstosettheIPaddressesofPCandH108Ltothesamenetworksegment,
intheformof192.168.1.x(xisanintegerbetween2to254).
Forexample,IPissetto192.168.1.2,subnetmaskissetto255.255.255.0,and
bothdefaultgatewayandDNSserveraresetto192.168.1.1.
b.ClickOKtosaveconguration.
3.3Configuring Configuring
Configuring
Wireless Wireless
Wireless
Connection Connection
Connection
1.ThePCisabletoconnecttoWLANnetworkwhenitisequipedwithwirelessnetworkcard.
2.BeforethePCisabletogetconnectedwithaWLANnetwork,theinstallationandcongu-
rationofwirelessnetworkcardmustbecompleted.
3.Thewirelessnetworkcardwillsearchforwirelessnetworksautomaticallyafterinstallation
andcongurationiscompleted.ThePCwillbereadyforuseaftersearchsucceed.If
encryptionisenabledonH108L,userswillbepromptedforcorrespondingencryptionkey.
3.4Restoring Restoring
Restoring
Default Default
Default
Settings Settings
Settings
Ifthedevicefailstofunctionorusersforgettheirloginpasswordduetoincorrectcongurations,
theproblemcanberesolvedbyrestoringdefaultsettings.
Refertothe label on thebottomofdevicefordetaileddefault settingparameters.
1.Whenthedeviceisoperatingnormally,keeppressingtheResetbuttonformorethan5
seconds(usinganeedleorapin).
2.Thesystemwillrestoredefaultsettingsandrestartautomatically.
4 4
4
WEB WEB
WEB
Configuration Configuration
Configuration
4.1Login/Logout Login/Logout
Login/Logout
H108LprovidesWeb-basedconguration,whichenablesuserstocongureandmanage
H108LviaWebbrowser.
1.Typehttp://192.168.1.1(thedefaultIPaddressoftheLAN-sideinterfaceofH108L)inthe
addressbarofIEbrowserandpressEnter.ThentheLoginpageshowninthefollowing
gurepopsup.
7
2.Inputusernameandpassword(defaultusernameandpasswordareadminandadmin)and
clickLogintoenterH108Lpage.
3.ClickLogoutatthetop-rightcornerofcorrespondingpagetoexit.
4.2Network Network
Network
Configuration Configuration
Configuration
4.2.1Creating Creating
Creating
WAN WAN
WAN
Connection Connection
Connection
1.Select[Network→WAN→WANConnection]toopentheWANConnectionpageas
showninthegurebelow.
2.Settheparametersaccordingtothedescriptionbelow.
ParameterNameDescription
ConnectionName
ThedefaultvalueisCreateWANConnection.Users
canselectcreatednetworkconnectionsfromthe
drop-downmenu.
Type
Typeofconnection.SelectWANconnectiontypefrom
fiveoptionsincludingPPPoE,PPPoA,Static(needthe
operatortoprovideIPaddress),DHCPandBridge
Connection.ThedefaultvalueisPPPoE.
NewConnectionNameContains1to256characters.
8
ParameterNameDescription
EnableNAT
Enable/disableNetworkAddressTranslation(NAT).This
functioncanbeconfiguredinroutemodeonly.Itcannot
beconfiguredinbridgemode.
EnableVLAN
Enable/disableVLANconfiguration.VLANIDand802.1p
areusedtodefinetowhichVLANthedevicebelongs
aswellasthepriority.
VLANID
VLANIDofdatapacketsatWANinterface.Thevalue
rangesfrom1to4094.
802.1p
Dealswithpriority,suitableformultipleWANconnections
only.Thevaluerangesfrom0to7.Thedefaultvalueis
0,whichindicatesnopriorityset.Thegreaterthevalue
is,thehigherthepriorityis.
VPI/VCI
VPI/VCI(VirtualPath/ChannelIdentifier)identifiesvirtual
pathandvirtualchannelofalink.
Inthecaseoffirst-timeconfiguration,selectCreate,and
thenconfiguretheVPI/VCIvalues.Otherwise,selecta
previouslyusedVPI/VCIvaluesfromthedrop-downlist.
NewVPI/VCI
ConfiguresVPI/VCIvalues,whichrangefrom0to255
andfrom0to65535respectively.Bothofwhichare
providedbytheISP.
EncapsulationType
Theprotocolencryptiontype,whichsupportsLLCand
VCMUX.
ServiceType
ConfigurationofATMQoSwhichimposesrestrictionson
uplinktraffic.Fourtypesareavailable:CBR,RT-VBR,
nRT-VBRandUBR.
Username/Password
UsernameandpasswordforWANconnection
authentication.BothofwhichareprovidedbytheISP.
AuthenticationType
Authenticationprotocoltype.Options:Auto,PAPand
CHAP.ThevalueisAutobydefault.
ConnectionTrigger
Connectiontriggeringmode.Options:AlwaysOn,On
Demand,andmanual.ThemodeisAlwaysonbydefault.
IdleTimeout
Thedefaultvalueis1200seconds.Itcanbesetwhen
theConnectionTriggerissettoOnDemandonly.
3.ClickCreatetocreateconnection.
9
4.2.2WLAN WLAN
WLAN
Configuration Configuration
Configuration
1.Select[Network→WLAN→Basic11n]toopentheWLANBasicParameterpage,as
showninthegurebelow.
2.Settheparametersaccordingtothedescriptionbelow.
ParameterNameDescription
EnableWirelessRFEnable/disableWLANRF.
EnableIsolationEnable/disableinternalisolation.
Mode
Wirelesscommunicationmode,including
Mixed(802.11b+802.11g)andMixed
802.11b+802.11g+802.11n.
Country/RegionCountryorregionwherethedevicetobeused.
BandWidth
Bandwidthtobeset.Options:20MHzand40MHz.
Thevalueis20MHzbydefault.Configurablewhen
Mixed(802.11b+802.11g+802.11n)isenabledonly.
Channel
Wirelesssignalchannel.Selectfromautoandinteg
ersfrom1to13accordingtothecountrycode.The
defaultvalueisAuto.
Wirelesschannelusedinthecommunicationbetween
thewirelessaccesspointandwirelessstation,which
channeltousedependsonthelocaladministration.
AllstationscommunicatingwithH108Lmustusethe
samechannel.
SGIEnable
Enable/disableSGI.Configurablewhen802.11n
modeisenabledonly.
BeaconIntervalThedefaultvalueis100ms.
10
ParameterNameDescription
TransmittingPower
Transmittingpowerlevel.Options:100%,80%,60%,
40%and20%.Thedefaultvalueis100%.
TransmittingPowerindicatestherationoftheoutput
powertothemaximumpower.Thehigherthepower
is,thelongerthetransmittingdistanceis.
QoSTypeThedefaultvalueisWMM.
3.ClickSubmitbuttontocompleteWLANconguration.
4.2.3WLAN WLAN
WLAN
Security Security
Security
Configuration Configuration
Configuration
1.Select[Network→WLAN→Security]toopentheWLANSecurityCongurationpage.
2.Congureparametersonthebasisofthefollowingdescription.
ParameterNameDescription
ChooseSSIDThedefaultvalueisSSID1.
AuthenticationType
Options:OpenSystem(indicatingnoencryption),
sharedkey,WPA-PSK,WPA2-PSKand
WPA/WPA2-PSK.
WPAPassphrase
WPAencryptionkey,whichcontains8to63
characters.
WPAGroupKeyUpdate
Interval
TheintervalofWPAgroupkeyupdate.Thedefault
valueis600seconds.
WPAEncryptionAlgorithm
WPAentryptionalgorithm,whichsupportsTKIP ,AES
andTKIP+AES.
IfuserswanttoenableTKIPorTKIP+AESencryption
algorithm,pleasefirstlyenableMixed(802.11b+802.
11g)wirelesscommunicationmode.
AvailableencryptionmethodsincludeWPAencryption,WEPencryption,andnoencryption.
11
lWPAencryption
Wi-FiProtectedAccess(WPA)includesWPA-PSK,WPA2–PSK,and
WPA/WPA2–PSK.
a.SelectWPA-PSK,WPA2–PSKorWPA/WPA2–PSKfromthedrop-downlistofAu-
thenticationTypeoptiontoenableWPAencryption.
b.Settheparametersaccordingtothedescriptionabove.
lWEPencryption
WiredEquivalentPrivacy(WEP)isawidelyusedWLANsecurityprotocol.
a.SelectSharedKeyfromthedrop-downlistofAuthenticationTypeoptiontoopen
thepageasshowninthefollowinggure.
b.Settheparametersaccordingtothedescriptionbelow.
ParameterNameDescription
WEPEncryption
Enable/disableWEPencryption.Theencryption
isdisabledbydefault.
WEPEncryptionLevel
ThelengthofWEPencryptionkeyis64bitor
128bit.
WEPKeyIndexIndexofWEPencryptionkey.
WEPKey1–WEPKey4
WEPencryptionkeys.64bitWEPencryption
keycorrespondsto5ASCIIcharactersor
10hexadecimalcharacters.128bitWEP
encryptionkeycorrespondsto13ASCII
charactersor26hexadecimalcharacters.
3.ClickSubmitbuttontocompleteWLANsecurityconguration.
12
5 5
5
Troubleshooting Troubleshooting
Troubleshooting
YoumayencountersomeproblemswheninstallingorusingH108L.Pleasetrythefollowing
solutions.Iftheproblemstillexists,pleasecontacttheserviceproviderforhelp.
ProblemSolution
Thepowerindicatorisoff
afterthedeviceisswitched
on
Usestandardpoweradapter,suchasthepoweradapter
deliveredwiththedevice.Makesurethattheadapteris
connectedproperlytobothH108Landthepowersocket.
TheLANindicatorisoffafter
Ethernetcableisconnected
MakesurethattheEthernet,PC,andH108Larecorrectly
connected,andthatthePCandH108Lareswitchedon.
TheDSLindicatorisoffafter
telephonelineisconnected.
Makesurethatthetelephonelineinuseisstandardline
(deliveredwiththedevice)andalldevicesarecorrectly
connectedaccordingtothepreviousdescription.Check
whetherthecablesareproperlypluggedin.Pleaseallow60
secondsforH108Ltoestablishconnectiontotheoperator.
TheDSLindicatorflashes
slowlyaftertelephonelineis
connected
IndicatesthatH108Lfailedtogetconnectedwiththe
DSLAMsystemoftheoperator.Pleasemakesurethat
H108Liscorrectlyconnectedaccordingtotheprevious
solutions.Ifatelephoneisinstalledbeforethesplitter,
pleasemakesurethatthesplitteriscorrectlyinstalled.
WLANcannotbeconnected
lMakesurethattheWLANRFisswitchedon,andthe
WLANindicatorison.
lCheckwhetherthewirelessnetworkcardiscorrectly
configured.
lCheckwhetherthenetworkname,encryptionmode,
andencryptionkeystoredinthePCareconsistentwith
thesettingsofH108L.
PCisunabletoaccessthe
network
lCheckwhethertheIPaddressofH108L(192.168.1.1by
default)canbepingedsuccessfullyfromthePC.Ifcann
ot,pleasechecktheEthernetconnectionandwhether
theindicatorstatusisnormal.
lItisrecommendedtosettheIPaddressandDNSserver
addresstobeobtainedautomatically.
lItisrecommendedtodisableallrunningfirewallorsecu
ritysoftware.
lDisabletheproxyserveroftheWebbrowser.
lCheckwhethertheindicatorstatusisnormal.
13
6 6
6
Specification Specification
Specification
PhysicalSpecification
lSize
Excludingbracket:200mm*168mm*36mm(length*width*height)
Includingbracket:200mm*168mm*75mm(length*width*height)
lWeight
Excludingbracket:300g(excludingpoweradapter)
Includingbracket:360g(excludingpoweradapter)
ElectricSpecification
lNon-USBScenario
Powersupply:Input220VAC/50Hz,output12VAC/750mA
Power:9W
lUSBScenario
Powersupply:Input220VAC/50Hz,output12VAC/1A
Power:12W
EnvironmentalRequirements
Temperature:0℃-45℃,humidity:5%-95%.
Qualifications
CCC,NetworkAccessLicense,Wi-Fi,RadioTransmitterModelAuthorization.
ZTECORPORATIONreservestherighttoupgradeormaketechnicalchangetothisproduct
withoutfurthernotice.
14
NO.55, Hi-Tech Road South,Shenzhen, P.R.China
Postcode:518057
Technical Support Website: http://support.zte.com.cn
Customer Support Center:
E-mail: support@zte.com.cn
ZXV10 H108L
Home Gateway
User Manual
Version 1.0
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

ZTE H220N User manual

ZTE
Brand
ZTE
Model
H220N
Category
Networking
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents