Fujitsu DESKPOWER 5000 User manual

i

DESKPOWER 5000 Series User’s Manual

Fujitsu endeavours to ensure that the information in this document is correct, but accepts no liability

for any error or omission in the same. Any procedures described in this document for operating Fujitsu

products should be read and understood by the operator before such products are used. To ensure

that Fujitsu products function without risk to safety and health, such procedures should be strictly

observed by the operator. The development of Fujitsu products and services is continuous and

published information may not be up to date. Any particular issue of a product may contain facilities

not described herein. It is important to check the current position with Fujitsu. Specifications and

statements as to performance in this document are Fujitsu estimates intended for general guidance.

They may require adjustment in particular circumstances and should therefore not be taken as formal

offers or commitments.

DESKPOWER is a trademark of Fujitsu Limited. The following are registered trademarks of Microsoft

Corporation: MS, MS-DOS, Windows

®

NT, Windows

®

98, Windows Millennium, Window

®

2000 and

Windows XP.

Intel and Pentium are registered trademarks of Intel Corporation in the U.S.

Celeron is a registered trademark of Intel Corporation in the U.S.

ATI and RADEON are registered trademarks of ATI Technologies, Inc.

Other product names are trademarks or registered trademarks of respective companies.

Other products are copyrighted by individual companies.

©

FUJITSU LIMITED 2001

We have been authorized by Microsoft Corporation in the U.S. to use Windows screenshots in this

manual.

DECLARATION OF CONFORMITY

according to FCC Part 15 Class B

This device complies with Part 15 Class B of the FCC Rules. Operations are subject to the following

two conditions:

(1) This device may not be allowed to cause harmful interference, (2) This device must accept any

interference received, including interference that may cause undesired operation.

Wesbite: www.fujitsu-pc-asia.com

CHAPTER 0 Bennett (INTRO) 6/7/02, 3:49 PM1

ii

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions carefully. Save these instructions for future reference.

2. Follow all warnings and instructions marked on the product.

3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol

cleaners. Use a damp cloth for cleaning.

4. Do not use this product near water.

5. Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious

damage to the product.

6. Slots and openings in the cabinet and the back or bottom are provided for ventilation; to ensure

reliable operation of the product and to protect it from overheating, these openings must not be

blocked or covered. The openings should never be blocked by placing the product on a bed, sofa,

rug, or other similar surface. This product should never be placed near or over a radiator or heat

register, or in a built-in installation unless proper ventilation is provided.

7. This product should be operated from the type of power indicated on the marking label. If you are

not sure of the type of power available, consult your dealer or local power company.

8. This product is equipped with a 3-wire grounding-type plug, a plug having a third (grounding) pin.

This will only plug into a grounding-type power outlet. This is a safety feature. If you are unable to

insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat

the purpose of the grounding-type plug.

9. Do not allow anything to rest on the power cord. Do not locate this product where persons will

walk on the cord.

10. If an extension cord is used with this product, make sure that the total ampere rating of the

equipment plugged into the extension cord does not exceed the extension cord ampere rating.

Also, make sure that the total rating of all products plugged into the wall outlet does not exceed

15 amperes.

11. Never push objects of any kind into this product through cabinet slots as they may touch dangerous

voltage points that could result in a fire or electric shock. Never spill liquid of any kind on the product.

12. Do not attempt to service this product yourself, as opening or removing covers may expose you

to dangerous voltage points or other risks. Refer all servicing to qualified service personnel.

CHAPTER 0 Bennett (INTRO) 6/7/02, 3:49 PM2

iii

13. Unplug this product from the wall outlet and refer servicing to qualified service personnel under

the following conditions:

a. When the power cord or plug is damaged or frayed.

b. If liquid has been spilled into the product.

c. If the product has been exposed to rain or water.

d. If the product does not operate normally when the operating instructions are followed. Adjust

only those controls that are covered by the operating instructions since improper adjustment

of other controls may result in damage and will often require extensive work by a qualified

technician to restore the product to normal condition.

e. If the product has been dropped or the cabinet has been damaged.

f. If the product exhibits a distinct change in performance, indicating a need for service.

14. CAUTION. When replacing the battery, be sure to install it with the polarities in the correct

position. There is a danger of explosion if the battery is replaced with an incorrect type or

is mistreated. Do not recharge, disassemble or dispose of in fire. Replace only with the

same or equivalent type recommeded by the manufacturer. Dispose of the used battery

according to the manufacturer’s instructions.

15. Use only the proper type of power supply cord set (provided in your accessories box) for this unit.

It should be a detachable type: UL listed/CSA certified, BS1363,ASTA,SS145 certified, rated 10A

250V minimum, VDE approved or its equivalent. Maximum length is 15 feet (4.6 meters).

16. NOTE:

Please take extra precaution when connecting the LAN cable; do not connect the LAN cable

to the peripheral device’s connector, that might have excessive voltage.

CHAPTER 0 Bennett (INTRO) 6/7/02, 3:49 PM3

iv

Before reading this manual

This section describes safety precautions and convention used in this manual. Be sure to read this.

For Safe Operation

This manual contains important information for using the DESKPOWER personal computer.

Read this manual thoroughly before using your PC. In particular, “Safety Precautions” in this manual

must be read and understood.

This manual including “Safety Precautions” must be readily available at all times.

This equipment is compliant with the PC industry standard (PC-11-1988) of the Japan Electronics

and Information Technology Industries Association.

Note

This product is a Class B Information Technology Equipment and conforms to the standard set by

the Voluntary Control Council for Interference by Technology Equipment (VCCI).This product is

designed to be used in a domestic environment, however, it may cause radio interference when

used in the vicinity of a radio or television receiver.

Make sure that you read the manual when using this product.

Fujitsu, as a member of the International Energy Star Program, recognizes that

this equipment is compliant with the standard of the International Energy Star

Program.

The International Energy Star Program is a worldwide program for promoting

energy saving for computers and other office equipment. The program aims at

promoting the development and use of products equipped with the functions that can effectively

reduce energy consumption and uses a voluntary system that allows enterprises to join at their

own discretion. The target products are office equipment including computers, displays, printers,

facsimiles, and copying machines. The standards for individual types of equipment and the mark

( ) prepared by the Program are used commonly among member countries.

Caution

This equipment is class B information technology equipment based on the standard of the Voluntary

Control Council for Interference by Information Technology Equipment (VCCI). Although the

equipment is intended for use in residential environments, it may create interference if placed near

radio or television.

Handle the equipment in accordance with the manual.

CHAPTER 0 Bennett (INTRO) 6/7/02, 3:49 PM4

v

Using this Product for High-Safety Applications

This product is for office, personal, home, ordinary industry and other general use. It is not designed

and manufactured for use in high-safety applications.

Do not use this product for such applications without taking measures to satisfy the high-safety

requirements.

High-safety applications require extremely high level of safety, and involve serious hazards to life

and health if the required safety is not assured. High-safety applications include the following.

● Nuclear reaction control in nuclear facilities, automatic aviation control, air traffic control, mass-

transportation control, life-supporting medical equipment, and missile launch control.

Some parts (including the CRT display, LCD, or hard disk drive) used on this product have a limited

life. When used continuously for a prolonged period, these parts will need earlier replacement.

Backing Up the Data

The customer is responsible for maintaining the integrity of data (including the basic and application

software) stored or installed on the product. We do not warrant the integrity of data stored or installed

on the personal computer the customer sent for repair. Take appropriate measures such as making

a backup.

We assume no responsibility for loss of data and any direct or incidental damage due to any cause

other than those specified in the warranty.

This computer is designed for use within the country. If you are using it abroad, please do so on

your own responsibility.

This equipment may be adversely affected by the momentary drop of the supplied voltage due to

lightning. Use of an AC uninterruptible power supply is recommended for measures against the

momentary drop of the supplied voltage.

(This message is based on the Japan Electronics and Information Technology Industries

Association’s guidelines for measures against momentary voltage drop in PCs.)

Since this equipment contains special materials controlled by the Foreign Exchange and Foreign

Trade Control Law. Authorization under the law may be required to export this equipment.

CHAPTER 0 Bennett (INTRO) 6/7/02, 3:49 PM5

vi

Microsoft Service Pack

Microsoft Corp. offers Service Pack to provide the users of Microsoft

®

Windows

®

with more stable

system operation (http://www.microsoft.com/).

The latest version of the Service Pack helps you configure the most stable system using Microsoft

®

Windows

®

provided at that time by Microsoft Corp.

We recommend you to use the latest version.

In some environments, however, the Service Pack may cause unexpected failure. Read

Readme.txt for the Service Pack before use.

Again, we recommend you to make a system backup in case of failed installation.

Components of this product (motherboard, CD-ROM, hard disk, and floppy disk drive) contain

traces of heavy metals (lead and chrome) and chemical (antimony).

CHAPTER 0 Bennett (INTRO) 6/7/02, 3:49 PM6

vii

Conventions Used in This Manual

Warning messages

This manual uses various signs. These signs urge the user to use the equipment safely so as to prevent

personal injury and/or property damage. The following are alert signals and explanations. The signs

should be understood before proceeding to subsequent portions of this manual.

This indicates a hazardous situation that could result in death or severe

injury if the user does not perform the procedure correctly.

This indicates a hazardous situation that could result in personal injury or

property damage if the user does not perform the procedure correctly.

In addition to the above signs, the following symbols are used to provide detailed information concerning

personal injury and/or property damage:

The symbol marked with [ ] indicates a warning or caution item. An

explanation of an alert is presented in or beside the symbol.

The symbol marked with [ ] indicates what must not be done (prohibited

action). The meaning of a direction is presented in or beside the symbol.

The symbol marked with [●] indicates what must be observed. The meaning

of a direction is presented in or beside the symbol.

Symbols used in the text

Symbol Meaning

The statement provided with this symbol explains cautions on use or what

must not be done. Be sure to read this first!

The statement provided with this symbol explains what is required to

operate hardware or software correctly. Be sure to read this first!

This symbol indicates the page or manual to refer to.

Representation of keys and their operation method

Key names used in this manual are not exactly represented with the characters appearing on the

keyboard but are represented with characters needed for explanation as follows:

Example: [Ctrl] key, [Enter] key, [→] key...

Two or more keys that must be pressed simultaneously are represented by combining them with a

“+” sign as follows:

Example: [Ctrl] + [F3] keys, [Shift] + [↑] keys...

WARNING

CAUTION

 Point

 Important

→

CHAPTER 0 Bennett (INTRO) 6/7/02, 3:49 PM7

viii

Command entry (keying in)

In this manual, a command entry is represented as follows:

diskcopy a: a:

↑↑

• Where character spacing is provided as shown by [↑], press the [Space] key once.

Commands, an example of which is given above in lowercase, can also be entered in uppercase.

• [CD-ROM drive] indicates the name of the CD-ROM drive being used. Enter the drive name in

accordance with your PC environment.

[CD-ROM drive]:\setup.exe

Screenshot example and illustrations

The screenshots and illustrations given in this manual are examples. The screenshots and file names

may be different from those actually shown on your PC and the illustrations may be different from the

actual appearance. For the explanatory purpose, illustration used in this manual may omit cables

connected on the actual PC.

Representation of continuous operation

Continuous operation steps are represented in this manual by combining them with a “•••• ” sign as

shown below:

Example: Sequential operation of clicking the [Start] button, pointing [Program], then clicking

[Accessories]

↓

Click the [Start] button → [Program] → [Accessories].

Representation for BIOS Setup

When the BIOS Setup procedure is explained in this manual, a menu, submenu, and item may be

represented by combining them with a hyphen as shown below:

Example: Set the [Serial Port 1] in [Advanced] to [Disable].

↓

[Advanced] - [Serial Port 1]: Disable

Floppy disk and CD-ROM drives

Users of a model without a floppy or CD-ROM drive should use a separately available drive for operation

with a necessary drive.

For operation of peripheral devices, refer to the relevant manuals.

CHAPTER 0 Bennett (INTRO) 6/7/02, 3:49 PM8

ix

Reference to products

In this manual, the product names are referred to as follows:

This manual includes information on other operating systems.

Product name Description used in the manual

Microsoft

®

Windows

®

XP Professional

Microsoft

®

Windows

®

XP Home Edition

Microsoft

®

Windows

®

2000 Professional

Microsoft

®

Windows NT

®

Workstation Operating System Version 4.0

Microsoft

®

Windows

®

Millennium Edition

Microsoft

®

Windows

®

98 operating system SECOND EDITION

Microsoft

®

MS-DOS

®

operating system

Note: Descriptions such as Windows XP/2000/NT/Me/98 are used.

Windows*

Windows

XP

Windows XP

Professional

Windows XP

Home Edition

Windows 2000

Windows NT

Windows Me

Windows 98

MS-DOS

CHAPTER 0 Bennett (INTRO) 6/7/02, 3:49 PM9

x

Recycling

Disposal of the PC unit

Disposal of the PC unit (including accessories except the LCD unit) is controlled by the Waste Disposal

and Public Cleaning Law.

● To institutional and corporate customers

Personal computers must be disposed of as industrial waste. Institutional and corporate customers

are obliged to entrust an authorized industrial-waste disposer.

● To individual customers

Personal computers should be disposed of as general waste. Individual customers are advised to

follow the disposal rules and regulations set forth by the local municipality.

Disposal of the LCD unit

The fluorescent tubes in the LCD contain mercury.

Disposal of the LCD unit is controlled by the Waste Disposal and Public Cleaning Law.

● To institutional and corporate customers

LCD units must be disposed of as industrial waste. Institutional and corporate customers are obliged

to entrust an authorized industrial-waste disposer.

● To individual customers

LCD units should be disposed of as general waste. Individual customers are advised to follow the

disposal rules and regulations set forth by the local municipality.

Disposal of batteries

The wireless keyboard and mouse use dry batteries. These batteries may explode when plunged

into the flames.

Disposal of the batteries is controlled by the Waste Disposal and Public Cleaning Law.

● To institutional and corporate customers

Dry batteries must be disposed of as industrial waste. Institutional and corporate customers are

advised to entrust an authorized industrial-waste disposer.

● To individual customers

Dry batteries should be disposed of as general waste. Individual customers are advised to follow

the disposal rules and regulations set forth by the local municipality.

CHAPTER 0 Bennett (INTRO) 6/7/02, 3:49 PM10

xi

Warning and caution labels

Your PC bears the warning and caution labels as shown below.

The warning and caution labels must not be removed or damaged.

Rear of the PC main unit

ATTENTION

115V of voltage switch in the power supply corresponds to 100-120V

230V of voltage switch in the power supply corresponds to 200-240V

WARNING

• Before mounting or dismounting an optional unit in/from your PC, switch off

the PC and all connected units and unplug all power cords from respective

outlets to prevent electric shock.

Electric shock

WARNING

When removing exterior parts in

order to mount option parts or

others inside the cabinet, switch

off the power supply for PC unit

and peripheral devices linked

with it, and disconnect the power

cable from outlet before working

to avoid risk of electric shock.

MODEL

FPC D

–

B0000

–

CP11804 0 0 1

PN

DESKPOWER

LISTED

UL1950

7J61

U

L

®

MADE IN SINGAPORE

50/60Hz100-120V(4.5A) (2.25A)

200-240V

Fujitsu Limited. Japan

(M)

By

FUJITSU LIMITED

Electric shock

WARNING

To prevent electric

shock and/or fire, do

not remove the cover

of this unit, which

includes a high

voltage section.

Inside the PC main unit

CHAPTER 0 Bennett (INTRO) 6/11/02, 11:05 AM11

xii

Before Reading This Manual

This section contains cautions for safe operation, representations and symbols used in this manual.

Be sure to read this first!

Chapter 1 Part Names

This chapter provides the names and functions of individual parts.

Chapter 2 Installation and Connection

This section describes the location of installation and installation of the computer.

Chapter 3 Hardware

This chapter provides the basic information on the PC and operation.

Chapter 4 System Expansion

This chapter provides basic information on how to handle the peripherals installed

(or can be installed) on the PC.

Chapter 5 Technical Information

This chapter describes the specifications of this PC.

Organization of This Manual

CHAPTER 0 Bennett (INTRO) 6/7/02, 3:49 PM12

xiii

Contents

CHAPTER 1 Part Names

1 Part Names and Functions ..............................................................2

Front of the PC Unit.......................................................................................... 2

Rear of the PC Unit ..........................................................................................4

Inside the PC Unit ............................................................................................ 6

Motherboard.....................................................................................................7

CHAPTER 2 Installation and Connection

1 Installation .......................................................................................10

Location of Installation ................................................................................... 10

Mounting Feet ................................................................................................ 10

Example of Installation ...................................................................................12

2 Connection ......................................................................................14

Connecting the Display/Keyboard/Mouse ...................................................... 15

Connect the Power Cord ................................................................................ 17

3 Power On .........................................................................................19

How to Power On ........................................................................................... 20

4 Setting Up ........................................................................................21

Setting Up Windows XP ................................................................................. 22

Setting Up Windows 2000 .............................................................................. 23

Problem During Setup?.................................................................................. 26

5 Turn Off the Computer....................................................................27

How to Turn Off .............................................................................................. 27

CHAPTER 3 Hardware

1 Keyboard .........................................................................................30

2 CDs...................................................................................................32

Inserting or Removing a CD........................................................................... 33

3 Floppy Disks ...................................................................................35

Inserting or Removing a Floppy Disk ............................................................. 35

4 Hard Disk .........................................................................................37

5 Maintenance of the Hardware ........................................................38

Maintenance of the PC Unit ........................................................................... 38

Maintenance of the Mouse............................................................................. 38

Maintenance of the Keyboard ........................................................................ 39

Cleaning CDs .................................................................................................39

Cleaning the Floppy Disk Drive ......................................................................39

CHAPTER 0 Bennett (INTRO) 6/13/02, 2:43 PM13

xiv

CHAPTER 4 System Expansion

1 Before Installing a Peripheral Device ............................................42

2 Removing the Cover .......................................................................44

Removing the Cover....................................................................................... 44

3 Installing Memory Modules............................................................45

Location of Memory Modules ......................................................................... 46

Applicable Memory Modules .......................................................................... 46

Installing Memory Modules ............................................................................ 47

4 Installing an Expansion Card ........................................................49

Location of expansion Cards......................................................................... 50

Applicable Expansion Cards .......................................................................... 50

Installing an Expansion Card ......................................................................... 50

CHAPTER 5 Technical Information

1 List of Specifications......................................................................54

PC Specifications ........................................................................................... 54

Energy consumption efficiency in accordance with the Law Concerning the

Rational Use of Energy .................................................................................. 55

LAN function................................................................................................... 56

2 Connector Specifications ..............................................................57

Glossary ..........................................................................................60

CHAPTER 0 Bennett (INTRO) 6/13/02, 2:43 PM14

CHAPTER 1

Part Names

CHAPTER 1 Bennett (01-08) 6/7/02, 3:50 PM1

2

1 Part Names and Functions

This section explains the names and functions of the parts of the PC unit and the

motherboard.



 Point

The remaining part of this manual assumes vertical placement.When you place the PC unit

horizontally, be careful about geometrical difference.

■ Front of the PC Unit

1 Power button

Press this button to turn on the PC unit or set the system to the standby mode (power-saving

mode).

2 Power lamp

This lamp lights up when the PC is on.

It lights up in green when the PC is in operation and in orange when the PC is in the standby mode.

CHAPTER 1 Bennett (01-08) 6/7/02, 3:50 PM2

3

3 Disk access lamp

This lamp lights up while the hard disk is accessed.

4 USB connector

Slide the cover down and connect USB peripherals.

5 Foot

Used for placing the PC.

This also prevents the PC in a vertical placement from tipping over.

6 CD eject button

Press this button to load or eject a CD-ROM disk or a music CD.This button can be used when the

PC is on.Do not press this button when the CD access lamp is on.

7 CD access lamp

The lamp continues to light when data is being read from the CD-ROM disk or when a music CD

is being played back.

8 CD-ROM drive

Insert a CD-ROM into this drive to read its data or programs, or insert a music CD for playback.

9 Floppy disk eject button

Press this button to remove a floppy disk from the floppy disk drive.

Do not press this button when the floppy disk access lamp is on.

10 Floppy disk drive

This drive accommodates a floppy disk for writing and reading data.

11 Floppy disk access lamp

This lamp lights up while the floppy disk drive is accessed.

CHAPTER 1 Bennett (01-08) 6/11/02, 11:14 AM3

4

■ Rear of the PC Unit

1 Burglarproof lock

Install a key to prevent burglary of the components in the PC.

2 Expansion card slots

Insert an optional expansion card to this slot.

This slot accommodates a half-size PCI card.

Put the supplied nylon band through the USB fixture slit to tie up the cable.

3 Inlet

Connect the power code of the PC unit to this connector.

4 Mouse connector

Connect a mouse.

5 Keyboard connector

Connect the keyboard.

CHAPTER 1 Bennett (01-08) 12/6/02, 10:12 AM4

5

6 Serial connector

Connect an RS-232C device connector.

7 Parallel connector

Connect a printer or scanner cable.

8 CRT connector

Connect the cable of an analog RGB display.

9 LAN connector

Connect a LAN cable.

10 USB connector

Connect a USB device.

11 Line OUT terminal

A terminal for sound output.Connect the input terminal of audio equipment to this terminal.

When connecting speakers, use those with a built-in amplifier.

12 Line IN terminal

A terminal for sound input.Connect the output terminal of audio equipment to this terminal.

13 Microphone jack

Plug a capacitor microphone to this jack.

14 Speaker terminal

Connect a speaker to this jack.

15 Outlet

Connect the power code of the display to this outlet.

CHAPTER 1 Bennett (01-08) 6/7/02, 3:50 PM5

6

■ Inside the PC Unit

1 Internal hard disk drive

An IDE-compliant hard disk drive.

2 Expansion card slots

Insert an optional expansion card to this slot.

This slot accommodates a half-size PCI card.

A SCSI card allows you to use an external hard disk drive or a magneto-optical disk drive.

3 Power supply unit

CHAPTER 1 Bennett (01-08) 12/6/02, 10:13 AM6

Page is loading ...

Fujitsu DESKPOWER 5000 User manual

This manual is also suitable for

Fujitsu DESKPOWER 5000 User manual

Related papers

Other documents