2. Baxton Studio
  3. BBT5210A1-BS-Black

Baxton Studio BBT5210A1-BS-Black, BBT5210A1-BS-Brown, BBT5210A1-BS-White Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the BBT5210 bar stool. This document details the step-by-step process for assembling the stool, including a parts list with images and clear cautions to follow. I'm ready to answer your questions about the instructions and the assembly process.
  • Should I fully tighten bolts during assembly?
    Is it ok to overtighten the bolts?
    Where should I keep the hardware parts?
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
ASSEMBLY INSTRUCTIONS
PART LIST
ITEM DESCRIPTION QTY
A CHAIR FRAME 1pc
B CHAIR LEG 4pcs
C SIDE RAIL 4pcs
MODEL : BBT5210 Bar Stool
PART LIST
ITEM DESCRIPTION QTY
1 JCBC Bolt M6 x 50mm 8pcs
2 M6 Flat Washer 8pcs
3 M6 Spring Washer 8pcs
4 Wood Screw M4 x 32mm 8pcs
5 M4 Allen Key 1pc
4
4 C
5
3
2
1
B
5
3
2
1
B
STEP 1 STEP 2 STEP 3 STEP 4
A
4
C
B
4
C
B
Don't screw tied
Don't screw tied
**Finish step 3,
Please screw tied the step 1&2 bolt.
M4 Allen Key (Ball Shape)
/