2. Baxton Studio
  3. BBT5304-Grey

Baxton Studio BBT5304-Grey Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the BBT 5304 stool. This document includes a detailed parts list, a hardware list, and a step-by-step guide to help you assemble your stool. I'm ready to answer any questions you might have based on the instructions provided.
  • Should I fully tighten the nuts and bolts right away?
    What should I do to avoid damaging screw threads?
    What tools are needed for assembly?
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver & Hammer (not provided).
ASSEMBLY INSTRUCTIONS
PART LIST
ITEM DESCRIPTION QTY
A CHAIR FRAME 1pc
B CHAIR LEG (L) 1pc
C CHAIR LEG (R) 1pc
D FRONT STRETCHER 1pc
E BACK STRETCHER 1pc
MODEL : BBT 5304 STOOL
HARDWARE LIST
ITEM DESCRIPTION QTY
1 JCBC Bolt M6 x 45mm 8pcs
2 M6 Spring Washer 8pcs
3 WOOD SCREW M4 x 32mm 4pcs
4 Wood Dowel M8 x 30mm 4pcs
5 M4 Allen Key (Ball Shape) 1pc
E
D
D
4
STEP 1 STEP 2
C
B
D
E
R
L
x 4
C
E
1
2
5
1 of 2
Short
Long
ASSEMBLY INSTRUCTIONS 2 of 2
STEP 3
R
L
STEP 4
3
x 4
Note : Follow the line drawing to
assemble the chair leg.
/