Fourstar Group 11209737V User manual

Fourstar Group
Brand
Fourstar Group
Model
11209737V
Type
User manual
ITEM# 11209737C
SIZE: 21L X 29.7H(CM)
MODEL: 1209737V
MULTI-PURPOSE UTILITY CART
FDS 11209737C
MULTI-PURPOSE UTILITY CART
DorisJosh 2008
01/24
ITEM DESCRIPTIONITEM NO. DESIGNERMDSERCUSTOMER DATEA/W NO.
This proprietary artwork and concepts are copyright designs of Fourstar Group Inc. 2006.
No part of this artwork may be reproduced or transmitted in any form without prior approval or consent
A
B
C
D
E
L&R SIDE
PANEL 2 pcs
QTY
PARTS LIST
NO
TOP PANEL
UPPER
SKIRT PANEL
SHELF &
BOTTOM PANEL
LOWER
SKIRT PANEL
1 pc
2 pcs
2 pcs
2 pcs
PARTS
A
B
B
C
C
D
E
HARDWARE LIST
1
2
NO QTY
3
4
5
CORNER BRACKET
C/B SCREW 8 pcs
'U' BRACKET
6 x 1/2 in. SCREW 16 pcs
4 pcsSOCKET CASTER
8 pcs
4 pcs
8 x 1/2 in. SCREW6 8 pcs
2
BEFORE YOU BEGIN, PLEASE READ ASSEMBLY
INSTRUCTIONS CAREFULLY. FOLLOW THEM STEP BY STEP.
CAUTION :
1. ADULT SUPERVISION IS REQUIRED DUE TO SMALL PARTS.
CARE SHOULD BE TAKEN IN THE UNPACKING AND
ASSEMBLY OF THE PRODUCT.
2. ASSEMBLE ON SOFT SURFACES TO PREVENT DAMAGE TO
THE PRODUCT FINISH.
3. MAKE SURE ALL PARTS ARE INCLUDED BEFORE ASSEMBLY.
ASSEMBLY TOOLS REQUIRED
3
ASSEMBLY INSTRUCTIONS
BEFORE YOU BEGIN, PLEASE READ ASSEMBLY
INSTRUCTIONS CAREFULLY. FOLLOW THEM STEP BY STEP.
3 CORNER BRACKET - 8 PCS
6 8 x 1/2 in. SCREW - 8 PCS
STEP 1:
ATTACH CORNER BRACKET (3) TO TOP PANEL (A) AND
BOTTOM PANEL (C) USING 8 x 1/2 in. SCREWS (6), AS SHOWN.
3
SIDE
TOP
A/C
UNFINISHED
SURFACE
6
6
6
6
4
STEP 2:
ATTACH L&R SIDE PANELS (B) AND SHELF PANEL (C) TO
ASSEMBLED STEP 1 USING C/B SCREWS (1) & 6 x 1/2 in. SCREW
(2), AS SHOWN.
1 C/B SCREW - 8 PCS
2 6 x 1/2 in. SCREW - 4 PCS
2
2
1
1
1
1
2
BC
UNFINISHED
SURFACE
UNFINISHED
SURFACE
UNFINISHED
SURFACE
C
B
2
5
STEP 3:
ASSEMBLE STEP 1 TO STEP 2 USING 6 x 1/2 in. SCREWS (2),
AS SHOWN.
2 6 x 1/2 in. SCREW - 4 PCS
C
UNFINISHED
SURFACE
B
BC
A
22
2
2
6
5 'U' BRACKET - 4 PCS
2 6 x 1/2 in. SCREW - 8 PCS
4 SOCKET CASTER - 4 PCS
STEP 4:
ATTACH UPPER SKIRT PANEL (D) AND LOWER SKIRT PANEL
(E) TO ASSEMBLED STEP 4 USING 6 x 1/2 in. SCREWS (2),
AS SHOWN.
ATTACH U-BRACKETS (5) AND
SOCKET CASTERS (4) TO THE
BOTTOM OF (B) L&R AS SHOWN.
5
4
D
D
E
UNFINISHED
SURFACE
UNFINISHED
SURFACE
C
C
A
B
B
E
2
2
2
2
7
Do you have any questions ? Missing small parts or hardware?
If you need assistance with the assembly of your 3 TIER
UTILITY CART please e-mail our Customer Service
Department at:
[email protected]
or call us at (508) 435-4830
or (800) 639-3803
Please include the following information in your email:
• Where item was purchased
• Item, model, style or SKU number listed on instructions
or box
• Part number, description of the part and quantity needed
This information will help us get the proper part to you faster
This unit is intended for use only with the
products and maximum weights indicated. Use
with other products or products heavier than the
maximum weights indicated may result in
instability causing possible injury. Furniture can
tip over or break if improperly moved. Have a
friend help to lift and carry the unit to it's new
location.
8
Top shelf weight
limit 127 lbs.
Shelf weight
limit 93 lbs.
Shelf weight
limit 93 lbs.
PHILLIPS
SCREWDRIVER
V
ITEM# 11209737C
SIZE: 21L X 29.7H(CM)
MODEL: 11209737C
MULTI-PURPOSE UTILITY CART
FDS 11209737C
MULTI-PURPOSE UTILITY CART
DorisJosh 2008
01/24
ITEM DESCRIPTIONITEM NO. DESIGNERMDSERCUSTOMER DATEA/W NO.
This proprietary artwork and concepts are copyright designs of Fourstar Group Inc. 2006.
No part of this artwork may be reproduced or transmitted in any form without prior approval or consent
A
B
C
D
E
L&R SIDE
PANEL 2 pcs
QTY
PARTS LIST
NO
TOP PANEL
UPPER
SKIRT PANEL
SHELF &
BOTTOM PANEL
LOWER
SKIRT PANEL
1 pc
2 pcs
2 pcs
2 pcs
PARTS
A
B
B
C
C
D
E
HARDWARE LIST
1
2
NO QTY
3
4
5
CORNER BRACKET
C/B SCREW 8 pcs
'U' BRACKET
6 x 1/2 in. SCREW 16 pcs
4 pcsSOCKET CASTER
8 pcs
4 pcs
8 x 1/2 in. SCREW6 8 pcs
2
BEFORE YOU BEGIN, PLEASE READ ASSEMBLY
INSTRUCTIONS CAREFULLY. FOLLOW THEM STEP BY STEP.
CAUTION :
1. ADULT SUPERVISION IS REQUIRED DUE TO SMALL PARTS.
CARE SHOULD BE TAKEN IN THE UNPACKING AND
ASSEMBLY OF THE PRODUCT.
2. ASSEMBLE ON SOFT SURFACES TO PREVENT DAMAGE TO
THE PRODUCT FINISH.
3. MAKE SURE ALL PARTS ARE INCLUDED BEFORE ASSEMBLY.
ASSEMBLY TOOLS REQUIRED
3
STEP 2:
ATTACH L&R SIDE PANELS (B) AND SHELF PANEL (C) TO
ASSEMBLED STEP 1 USING C/B SCREWS (1) & 6 x 1/2 in. SCREW
(2), AS SHOWN.
1 C/B SCREW - 8 PCS
2 6 x 1/2 in. SCREW - 4 PCS
2
2
1
1
1
1
2
BC
UNFINISHED
SURFACE
UNFINISHED
SURFACE
UNFINISHED
SURFACE
C
B
2
5
STEP 3:
ASSEMBLE STEP 1 TO STEP 2 USING 6 x 1/2 in. SCREWS (2),
AS SHOWN.
2 6 x 1/2 in. SCREW - 4 PCS
C
UNFINISHED
SURFACE
B
BC
A
22
2
2
6
5 'U' BRACKET - 4 PCS
2 6 x 1/2 in. SCREW - 8 PCS
4 SOCKET CASTER - 4 PCS
STEP 4:
ATTACH UPPER SKIRT PANEL (D) AND LOWER SKIRT PANEL
(E) TO ASSEMBLED STEP 4 USING 6 x 1/2 in. SCREWS (2),
AS SHOWN.
ATTACH U-BRACKETS (5) AND
SOCKET CASTERS (4) TO THE
BOTTOM OF (B) L&R AS SHOWN.
5
4
D
D
E
UNFINISHED
SURFACE
UNFINISHED
SURFACE
C
C
A
B
B
E
2
2
2
2
7
Do you have any questions ? Missing small parts or hardware?
If you need assistance with the assembly of your 3 TIER
UTILITY CART please e-mail our Customer Service
Department at:
[email protected]
or call us at (508) 435-4830
or (800) 639-3803
Please include the following information in your email:
• Where item was purchased
• Item, model, style or SKU number listed on instructions
or box
• Part number, description of the part and quantity needed
This information will help us get the proper part to you faster
This unit is intended for use only with the
products and maximum weights indicated. Use
with other products or products heavier than the
maximum weights indicated may result in
instability causing possible injury. Furniture can
tip over or break if improperly moved. Have a
friend help to lift and carry the unit to it's new
location.
8
Top shelf weight
limit 127 lbs.
Shelf weight
limit 93 lbs.
Shelf weight
limit 93 lbs.
PHILLIPS
SCREWDRIVER
ITEM# 11209737C
SIZE: 21L X 29.7H(CM)
MODEL: 11209737C
MULTI-PURPOSE UTILITY CART
FDS 11209737C
MULTI-PURPOSE UTILITY CART
DorisJosh 2008
01/24
ITEM DESCRIPTIONITEM NO. DESIGNERMDSERCUSTOMER DATEA/W NO.
This proprietary artwork and concepts are copyright designs of Fourstar Group Inc. 2006.
No part of this artwork may be reproduced or transmitted in any form without prior approval or consent
A
B
C
D
E
L&R SIDE
PANEL 2 pcs
QTY
PARTS LIST
NO
TOP PANEL
UPPER
SKIRT PANEL
SHELF &
BOTTOM PANEL
LOWER
SKIRT PANEL
1 pc
2 pcs
2 pcs
2 pcs
PARTS
A
B
B
C
C
D
E
HARDWARE LIST
1
2
NO QTY
3
4
5
CORNER BRACKET
C/B SCREW 8 pcs
'U' BRACKET
6 x 1/2 in. SCREW 16 pcs
4 pcsSOCKET CASTER
8 pcs
4 pcs
8 x 1/2 in. SCREW6 8 pcs
2
BEFORE YOU BEGIN, PLEASE READ ASSEMBLY
INSTRUCTIONS CAREFULLY. FOLLOW THEM STEP BY STEP.
CAUTION :
1. ADULT SUPERVISION IS REQUIRED DUE TO SMALL PARTS.
CARE SHOULD BE TAKEN IN THE UNPACKING AND
ASSEMBLY OF THE PRODUCT.
2. ASSEMBLE ON SOFT SURFACES TO PREVENT DAMAGE TO
THE PRODUCT FINISH.
3. MAKE SURE ALL PARTS ARE INCLUDED BEFORE ASSEMBLY.
ASSEMBLY TOOLS REQUIRED
3
ASSEMBLY INSTRUCTIONS
BEFORE YOU BEGIN, PLEASE READ ASSEMBLY
INSTRUCTIONS CAREFULLY. FOLLOW THEM STEP BY STEP.
3 CORNER BRACKET - 8 PCS
6 8 x 1/2 in. SCREW - 8 PCS
STEP 1:
ATTACH CORNER BRACKET (3) TO TOP PANEL (A) AND
BOTTOM PANEL (C) USING 8 x 1/2 in. SCREWS (6), AS SHOWN.
3
SIDE
TOP
A/C
UNFINISHED
SURFACE
6
6
6
6
4
STEP 2:
ATTACH L&R SIDE PANELS (B) AND SHELF PANEL (C) TO
ASSEMBLED STEP 1 USING C/B SCREWS (1) & 6 x 1/2 in. SCREW
(2), AS SHOWN.
1 C/B SCREW - 8 PCS
2 6 x 1/2 in. SCREW - 4 PCS
2
2
1
1
1
1
2
BC
UNFINISHED
SURFACE
UNFINISHED
SURFACE
UNFINISHED
SURFACE
C
B
2
5
STEP 3:
ASSEMBLE STEP 1 TO STEP 2 USING 6 x 1/2 in. SCREWS (2),
AS SHOWN.
2 6 x 1/2 in. SCREW - 4 PCS
C
UNFINISHED
SURFACE
B
BC
A
22
2
2
6
5 'U' BRACKET - 4 PCS
2 6 x 1/2 in. SCREW - 8 PCS
4 SOCKET CASTER - 4 PCS
STEP 4:
ATTACH UPPER SKIRT PANEL (D) AND LOWER SKIRT PANEL
(E) TO ASSEMBLED STEP 4 USING 6 x 1/2 in. SCREWS (2),
AS SHOWN.
ATTACH U-BRACKETS (5) AND
SOCKET CASTERS (4) TO THE
BOTTOM OF (B) L&R AS SHOWN.
5
4
D
D
E
UNFINISHED
SURFACE
UNFINISHED
SURFACE
C
C
A
B
B
E
2
2
2
2
7
Do you have any questions ? Missing small parts or hardware?
If you need assistance with the assembly of your 3 TIER
UTILITY CART please e-mail our Customer Service
Department at:
[email protected]
or call us at (508) 435-4830
or (800) 639-3803
Please include the following information in your email:
• Where item was purchased
• Item, model, style or SKU number listed on instructions
or box
• Part number, description of the part and quantity needed
This information will help us get the proper part to you faster
This unit is intended for use only with the
products and maximum weights indicated. Use
with other products or products heavier than the
maximum weights indicated may result in
instability causing possible injury. Furniture can
tip over or break if improperly moved. Have a
friend help to lift and carry the unit to it's new
location.
8
Top shelf weight
limit 127 lbs.
Shelf weight
limit 93 lbs.
Shelf weight
limit 93 lbs.
PHILLIPS
SCREWDRIVER
ITEM# 11209737C
SIZE: 21L X 29.7H(CM)
MODEL: 11209737C
MULTI-PURPOSE UTILITY CART
FDS 11209737C
MULTI-PURPOSE UTILITY CART
DorisJosh 2008
01/24
ITEM DESCRIPTIONITEM NO. DESIGNERMDSERCUSTOMER DATEA/W NO.
This proprietary artwork and concepts are copyright designs of Fourstar Group Inc. 2006.
No part of this artwork may be reproduced or transmitted in any form without prior approval or consent
A
B
C
D
E
L&R SIDE
PANEL 2 pcs
QTY
PARTS LIST
NO
TOP PANEL
UPPER
SKIRT PANEL
SHELF &
BOTTOM PANEL
LOWER
SKIRT PANEL
1 pc
2 pcs
2 pcs
2 pcs
PARTS
A
B
B
C
C
D
E
HARDWARE LIST
1
2
NO QTY
3
4
5
CORNER BRACKET
C/B SCREW 8 pcs
'U' BRACKET
6 x 1/2 in. SCREW 16 pcs
4 pcsSOCKET CASTER
8 pcs
4 pcs
8 x 1/2 in. SCREW6 8 pcs
2
BEFORE YOU BEGIN, PLEASE READ ASSEMBLY
INSTRUCTIONS CAREFULLY. FOLLOW THEM STEP BY STEP.
CAUTION :
1. ADULT SUPERVISION IS REQUIRED DUE TO SMALL PARTS.
CARE SHOULD BE TAKEN IN THE UNPACKING AND
ASSEMBLY OF THE PRODUCT.
2. ASSEMBLE ON SOFT SURFACES TO PREVENT DAMAGE TO
THE PRODUCT FINISH.
3. MAKE SURE ALL PARTS ARE INCLUDED BEFORE ASSEMBLY.
ASSEMBLY TOOLS REQUIRED
3
ASSEMBLY INSTRUCTIONS
BEFORE YOU BEGIN, PLEASE READ ASSEMBLY
INSTRUCTIONS CAREFULLY. FOLLOW THEM STEP BY STEP.
3 CORNER BRACKET - 8 PCS
6 8 x 1/2 in. SCREW - 8 PCS
STEP 1:
ATTACH CORNER BRACKET (3) TO TOP PANEL (A) AND
BOTTOM PANEL (C) USING 8 x 1/2 in. SCREWS (6), AS SHOWN.
3
SIDE
TOP
A/C
UNFINISHED
SURFACE
6
6
6
6
4
STEP 2:
ATTACH L&R SIDE PANELS (B) AND SHELF PANEL (C) TO
ASSEMBLED STEP 1 USING C/B SCREWS (1) & 6 x 1/2 in. SCREW
(2), AS SHOWN.
1 C/B SCREW - 8 PCS
2 6 x 1/2 in. SCREW - 4 PCS
2
2
1
1
1
1
2
BC
UNFINISHED
SURFACE
UNFINISHED
SURFACE
UNFINISHED
SURFACE
C
B
2
5
STEP 3:
ASSEMBLE STEP 1 TO STEP 2 USING 6 x 1/2 in. SCREWS (2),
AS SHOWN.
2 6 x 1/2 in. SCREW - 4 PCS
C
UNFINISHED
SURFACE
B
BC
A
22
2
2
6
5 'U' BRACKET - 4 PCS
2 6 x 1/2 in. SCREW - 8 PCS
4 SOCKET CASTER - 4 PCS
STEP 4:
ATTACH UPPER SKIRT PANEL (D) AND LOWER SKIRT PANEL
(E) TO ASSEMBLED STEP 4 USING 6 x 1/2 in. SCREWS (2),
AS SHOWN.
ATTACH U-BRACKETS (5) AND
SOCKET CASTERS (4) TO THE
BOTTOM OF (B) L&R AS SHOWN.
5
4
D
D
E
UNFINISHED
SURFACE
UNFINISHED
SURFACE
C
C
A
B
B
E
2
2
2
2
7
Do you have any questions ? Missing small parts or hardware?
If you need assistance with the assembly of your 3 TIER
UTILITY CART please e-mail our Customer Service
Department at:
[email protected]
or call us at (508) 435-4830
or (800) 639-3803
Please include the following information in your email:
• Where item was purchased
• Item, model, style or SKU number listed on instructions
or box
• Part number, description of the part and quantity needed
This information will help us get the proper part to you faster
This unit is intended for use only with the
products and maximum weights indicated. Use
with other products or products heavier than the
maximum weights indicated may result in
instability causing possible injury. Furniture can
tip over or break if improperly moved. Have a
friend help to lift and carry the unit to it's new
location.
8
Top shelf weight
limit 127 lbs.
Shelf weight
limit 93 lbs.
Shelf weight
limit 93 lbs.
PHILLIPS
SCREWDRIVER
ITEM# 11209737C
SIZE: 21L X 29.7H(CM)
MODEL: 11209737C
MULTI-PURPOSE UTILITY CART
FDS 11209737C
MULTI-PURPOSE UTILITY CART
DorisJosh 2008
01/24
ITEM DESCRIPTIONITEM NO. DESIGNERMDSERCUSTOMER DATEA/W NO.
This proprietary artwork and concepts are copyright designs of Fourstar Group Inc. 2006.
No part of this artwork may be reproduced or transmitted in any form without prior approval or consent
A
B
C
D
E
L&R SIDE
PANEL 2 pcs
QTY
PARTS LIST
NO
TOP PANEL
UPPER
SKIRT PANEL
SHELF &
BOTTOM PANEL
LOWER
SKIRT PANEL
1 pc
2 pcs
2 pcs
2 pcs
PARTS
A
B
B
C
C
D
E
HARDWARE LIST
1
2
NO QTY
3
4
5
CORNER BRACKET
C/B SCREW 8 pcs
'U' BRACKET
6 x 1/2 in. SCREW 16 pcs
4 pcsSOCKET CASTER
8 pcs
4 pcs
8 x 1/2 in. SCREW6 8 pcs
2
BEFORE YOU BEGIN, PLEASE READ ASSEMBLY
INSTRUCTIONS CAREFULLY. FOLLOW THEM STEP BY STEP.
CAUTION :
1. ADULT SUPERVISION IS REQUIRED DUE TO SMALL PARTS.
CARE SHOULD BE TAKEN IN THE UNPACKING AND
ASSEMBLY OF THE PRODUCT.
2. ASSEMBLE ON SOFT SURFACES TO PREVENT DAMAGE TO
THE PRODUCT FINISH.
3. MAKE SURE ALL PARTS ARE INCLUDED BEFORE ASSEMBLY.
ASSEMBLY TOOLS REQUIRED
3
ASSEMBLY INSTRUCTIONS
BEFORE YOU BEGIN, PLEASE READ ASSEMBLY
INSTRUCTIONS CAREFULLY. FOLLOW THEM STEP BY STEP.
3 CORNER BRACKET - 8 PCS
6 8 x 1/2 in. SCREW - 8 PCS
STEP 1:
ATTACH CORNER BRACKET (3) TO TOP PANEL (A) AND
BOTTOM PANEL (C) USING 8 x 1/2 in. SCREWS (6), AS SHOWN.
3
SIDE
TOP
A/C
UNFINISHED
SURFACE
6
6
6
6
4
STEP 2:
ATTACH L&R SIDE PANELS (B) AND SHELF PANEL (C) TO
ASSEMBLED STEP 1 USING C/B SCREWS (1) & 6 x 1/2 in. SCREW
(2), AS SHOWN.
1 C/B SCREW - 8 PCS
2 6 x 1/2 in. SCREW - 4 PCS
2
2
1
1
1
1
2
BC
UNFINISHED
SURFACE
UNFINISHED
SURFACE
UNFINISHED
SURFACE
C
B
2
5
STEP 3:
ASSEMBLE STEP 1 TO STEP 2 USING 6 x 1/2 in. SCREWS (2),
AS SHOWN.
2 6 x 1/2 in. SCREW - 4 PCS
C
UNFINISHED
SURFACE
B
BC
A
22
2
2
6
5 'U' BRACKET - 4 PCS
2 6 x 1/2 in. SCREW - 8 PCS
4 SOCKET CASTER - 4 PCS
STEP 4:
ATTACH UPPER SKIRT PANEL (D) AND LOWER SKIRT PANEL
(E) TO ASSEMBLED STEP 4 USING 6 x 1/2 in. SCREWS (2),
AS SHOWN.
ATTACH U-BRACKETS (5) AND
SOCKET CASTERS (4) TO THE
BOTTOM OF (B) L&R AS SHOWN.
5
4
D
D
E
UNFINISHED
SURFACE
UNFINISHED
SURFACE
C
C
A
B
B
E
2
2
2
2
7
Do you have any questions ? Missing small parts or hardware?
If you need assistance with the assembly of your 3 TIER
UTILITY CART please e-mail our Customer Service
Department at:
[email protected]
or call us at (508) 435-4830
or (800) 639-3803
Please include the following information in your email:
• Where item was purchased
• Item, model, style or SKU number listed on instructions
or box
• Part number, description of the part and quantity needed
This information will help us get the proper part to you faster
This unit is intended for use only with the
products and maximum weights indicated. Use
with other products or products heavier than the
maximum weights indicated may result in
instability causing possible injury. Furniture can
tip over or break if improperly moved. Have a
friend help to lift and carry the unit to it's new
location.
8
Top shelf weight
limit 127 lbs.
Shelf weight
limit 93 lbs.
Shelf weight
limit 93 lbs.
PHILLIPS
SCREWDRIVER
ITEM# 11209737C
SIZE: 21L X 29.7H(CM)
MODEL: 11209737C
MULTI-PURPOSE UTILITY CART
FDS 11209737C
MULTI-PURPOSE UTILITY CART
DorisJosh 2008
01/24
ITEM DESCRIPTIONITEM NO. DESIGNERMDSERCUSTOMER DATEA/W NO.
This proprietary artwork and concepts are copyright designs of Fourstar Group Inc. 2006.
No part of this artwork may be reproduced or transmitted in any form without prior approval or consent
A
B
C
D
E
L&R SIDE
PANEL 2 pcs
QTY
PARTS LIST
NO
TOP PANEL
UPPER
SKIRT PANEL
SHELF &
BOTTOM PANEL
LOWER
SKIRT PANEL
1 pc
2 pcs
2 pcs
2 pcs
PARTS
A
B
B
C
C
D
E
HARDWARE LIST
1
2
NO QTY
3
4
5
CORNER BRACKET
C/B SCREW 8 pcs
'U' BRACKET
6 x 1/2 in. SCREW 16 pcs
4 pcsSOCKET CASTER
8 pcs
4 pcs
8 x 1/2 in. SCREW6 8 pcs
2
BEFORE YOU BEGIN, PLEASE READ ASSEMBLY
INSTRUCTIONS CAREFULLY. FOLLOW THEM STEP BY STEP.
CAUTION :
1. ADULT SUPERVISION IS REQUIRED DUE TO SMALL PARTS.
CARE SHOULD BE TAKEN IN THE UNPACKING AND
ASSEMBLY OF THE PRODUCT.
2. ASSEMBLE ON SOFT SURFACES TO PREVENT DAMAGE TO
THE PRODUCT FINISH.
3. MAKE SURE ALL PARTS ARE INCLUDED BEFORE ASSEMBLY.
ASSEMBLY TOOLS REQUIRED
3
ASSEMBLY INSTRUCTIONS
BEFORE YOU BEGIN, PLEASE READ ASSEMBLY
INSTRUCTIONS CAREFULLY. FOLLOW THEM STEP BY STEP.
3 CORNER BRACKET - 8 PCS
6 8 x 1/2 in. SCREW - 8 PCS
STEP 1:
ATTACH CORNER BRACKET (3) TO TOP PANEL (A) AND
BOTTOM PANEL (C) USING 8 x 1/2 in. SCREWS (6), AS SHOWN.
3
SIDE
TOP
A/C
UNFINISHED
SURFACE
6
6
6
6
4
STEP 2:
ATTACH L&R SIDE PANELS (B) AND SHELF PANEL (C) TO
ASSEMBLED STEP 1 USING C/B SCREWS (1) & 6 x 1/2 in. SCREW
(2), AS SHOWN.
1 C/B SCREW - 8 PCS
2 6 x 1/2 in. SCREW - 4 PCS
2
2
1
1
1
1
2
BC
UNFINISHED
SURFACE
UNFINISHED
SURFACE
UNFINISHED
SURFACE
C
B
2
5
STEP 3:
ASSEMBLE STEP 1 TO STEP 2 USING 6 x 1/2 in. SCREWS (2),
AS SHOWN.
2 6 x 1/2 in. SCREW - 4 PCS
C
UNFINISHED
SURFACE
B
BC
A
22
2
2
6
5 'U' BRACKET - 4 PCS
2 6 x 1/2 in. SCREW - 8 PCS
4 SOCKET CASTER - 4 PCS
STEP 4:
ATTACH UPPER SKIRT PANEL (D) AND LOWER SKIRT PANEL
(E) TO ASSEMBLED STEP 4 USING 6 x 1/2 in. SCREWS (2),
AS SHOWN.
ATTACH U-BRACKETS (5) AND
SOCKET CASTERS (4) TO THE
BOTTOM OF (B) L&R AS SHOWN.
5
4
D
D
E
UNFINISHED
SURFACE
UNFINISHED
SURFACE
C
C
A
B
B
E
2
2
2
2
7
PHILLIPS
SCREWDRIVER
ITEM# 11209737C
SIZE: 21L X 29.7H(CM)
MODEL: 11209737C
MULTI-PURPOSE UTILITY CART
FDS 11209737C
MULTI-PURPOSE UTILITY CART
DorisJosh 2008
01/24
ITEM DESCRIPTIONITEM NO. DESIGNERMDSERCUSTOMER DATEA/W NO.
This proprietary artwork and concepts are copyright designs of Fourstar Group Inc. 2006.
No part of this artwork may be reproduced or transmitted in any form without prior approval or consent
A
B
C
D
E
L&R SIDE
PANEL 2 pcs
QTY
PARTS LIST
NO
TOP PANEL
UPPER
SKIRT PANEL
SHELF &
BOTTOM PANEL
LOWER
SKIRT PANEL
1 pc
2 pcs
2 pcs
2 pcs
PARTS
A
B
B
C
C
D
E
HARDWARE LIST
1
2
NO QTY
3
4
5
CORNER BRACKET
C/B SCREW 8 pcs
'U' BRACKET
6 x 1/2 in. SCREW 16 pcs
4 pcsSOCKET CASTER
8 pcs
4 pcs
8 x 1/2 in. SCREW6 8 pcs
2
BEFORE YOU BEGIN, PLEASE READ ASSEMBLY
INSTRUCTIONS CAREFULLY. FOLLOW THEM STEP BY STEP.
CAUTION :
1. ADULT SUPERVISION IS REQUIRED DUE TO SMALL PARTS.
CARE SHOULD BE TAKEN IN THE UNPACKING AND
ASSEMBLY OF THE PRODUCT.
2. ASSEMBLE ON SOFT SURFACES TO PREVENT DAMAGE TO
THE PRODUCT FINISH.
3. MAKE SURE ALL PARTS ARE INCLUDED BEFORE ASSEMBLY.
ASSEMBLY TOOLS REQUIRED
3
ASSEMBLY INSTRUCTIONS
BEFORE YOU BEGIN, PLEASE READ ASSEMBLY
INSTRUCTIONS CAREFULLY. FOLLOW THEM STEP BY STEP.
3 CORNER BRACKET - 8 PCS
6 8 x 1/2 in. SCREW - 8 PCS
STEP 1:
ATTACH CORNER BRACKET (3) TO TOP PANEL (A) AND
BOTTOM PANEL (C) USING 8 x 1/2 in. SCREWS (6), AS SHOWN.
3
SIDE
TOP
A/C
UNFINISHED
SURFACE
6
6
6
6
4
STEP 2:
ATTACH L&R SIDE PANELS (B) AND SHELF PANEL (C) TO
ASSEMBLED STEP 1 USING C/B SCREWS (1) & 6 x 1/2 in. SCREW
(2), AS SHOWN.
1 C/B SCREW - 8 PCS
2 6 x 1/2 in. SCREW - 4 PCS
2
2
1
1
1
1
2
BC
UNFINISHED
SURFACE
UNFINISHED
SURFACE
UNFINISHED
SURFACE
C
B
2
5
STEP 3:
ASSEMBLE STEP 1 TO STEP 2 USING 6 x 1/2 in. SCREWS (2),
AS SHOWN.
2 6 x 1/2 in. SCREW - 4 PCS
C
UNFINISHED
SURFACE
B
BC
A
22
2
2
6
5 'U' BRACKET - 4 PCS
2 6 x 1/2 in. SCREW - 8 PCS
4 SOCKET CASTER - 4 PCS
STEP 4:
ATTACH UPPER SKIRT PANEL (D) AND LOWER SKIRT PANEL
(E) TO ASSEMBLED STEP 4 USING 6 x 1/2 in. SCREWS (2),
AS SHOWN.
ATTACH U-BRACKETS (5) AND
SOCKET CASTERS (4) TO THE
BOTTOM OF (B) L&R AS SHOWN.
5
4
D
D
E
UNFINISHED
SURFACE
UNFINISHED
SURFACE
C
C
A
B
B
E
2
2
2
2
7
Do you have any questions ? Missing small parts or hardware?
If you need assistance with the assembly of your 3 TIER
UTILITY CART please e-mail our Customer Service
Department at:
[email protected]
or call us at (508) 435-4830
or (800) 639-3803
Please include the following information in your email:
• Where item was purchased
• Item, model, style or SKU number listed on instructions
or box
• Part number, description of the part and quantity needed
This information will help us get the proper part to you faster
This unit is intended for use only with the
products and maximum weights indicated. Use
with other products or products heavier than the
maximum weights indicated may result in
instability causing possible injury. Furniture can
tip over or break if improperly moved. Have a
friend help to lift and carry the unit to it's new
location.
8
Top shelf weight
limit 127 lbs.
Shelf weight
limit 93 lbs.
Shelf weight
limit 93 lbs.
PHILLIPS
SCREWDRIVER
ITEM# 11209737C
SIZE: 21L X 29.7H(CM)
MODEL: 11209737C
MULTI-PURPOSE UTILITY CART
FDS 11209737C
MULTI-PURPOSE UTILITY CART
DorisJosh 2008
01/24
ITEM DESCRIPTIONITEM NO. DESIGNERMDSERCUSTOMER DATEA/W NO.
This proprietary artwork and concepts are copyright designs of Fourstar Group Inc. 2006.
No part of this artwork may be reproduced or transmitted in any form without prior approval or consent
A
B
C
D
E
L&R SIDE
PANEL 2 pcs
QTY
PARTS LIST
NO
TOP PANEL
UPPER
SKIRT PANEL
SHELF &
BOTTOM PANEL
LOWER
SKIRT PANEL
1 pc
2 pcs
2 pcs
2 pcs
PARTS
A
B
B
C
C
D
E
HARDWARE LIST
1
2
NO QTY
3
4
5
CORNER BRACKET
C/B SCREW 8 pcs
'U' BRACKET
6 x 1/2 in. SCREW 16 pcs
4 pcsSOCKET CASTER
8 pcs
4 pcs
8 x 1/2 in. SCREW6 8 pcs
2
BEFORE YOU BEGIN, PLEASE READ ASSEMBLY
INSTRUCTIONS CAREFULLY. FOLLOW THEM STEP BY STEP.
CAUTION :
1. ADULT SUPERVISION IS REQUIRED DUE TO SMALL PARTS.
CARE SHOULD BE TAKEN IN THE UNPACKING AND
ASSEMBLY OF THE PRODUCT.
2. ASSEMBLE ON SOFT SURFACES TO PREVENT DAMAGE TO
THE PRODUCT FINISH.
3. MAKE SURE ALL PARTS ARE INCLUDED BEFORE ASSEMBLY.
ASSEMBLY TOOLS REQUIRED
3
ASSEMBLY INSTRUCTIONS
BEFORE YOU BEGIN, PLEASE READ ASSEMBLY
INSTRUCTIONS CAREFULLY. FOLLOW THEM STEP BY STEP.
3 CORNER BRACKET - 8 PCS
6 8 x 1/2 in. SCREW - 8 PCS
STEP 1:
ATTACH CORNER BRACKET (3) TO TOP PANEL (A) AND
BOTTOM PANEL (C) USING 8 x 1/2 in. SCREWS (6), AS SHOWN.
3
SIDE
TOP
A/C
UNFINISHED
SURFACE
6
6
6
6
4
STEP 2:
ATTACH L&R SIDE PANELS (B) AND SHELF PANEL (C) TO
ASSEMBLED STEP 1 USING C/B SCREWS (1) & 6 x 1/2 in. SCREW
(2), AS SHOWN.
1 C/B SCREW - 8 PCS
2 6 x 1/2 in. SCREW - 4 PCS
2
2
1
1
1
1
2
BC
UNFINISHED
SURFACE
UNFINISHED
SURFACE
UNFINISHED
SURFACE
C
B
2
5
STEP 3:
ASSEMBLE STEP 1 TO STEP 2 USING 6 x 1/2 in. SCREWS (2),
AS SHOWN.
2 6 x 1/2 in. SCREW - 4 PCS
C
UNFINISHED
SURFACE
B
BC
A
22
2
2
6
5 'U' BRACKET - 4 PCS
2 6 x 1/2 in. SCREW - 8 PCS
4 SOCKET CASTER - 4 PCS
STEP 4:
ATTACH UPPER SKIRT PANEL (D) AND LOWER SKIRT PANEL
(E) TO ASSEMBLED STEP 4 USING 6 x 1/2 in. SCREWS (2),
AS SHOWN.
ATTACH U-BRACKETS (5) AND
SOCKET CASTERS (4) TO THE
BOTTOM OF (B) L&R AS SHOWN.
5
4
D
D
E
UNFINISHED
SURFACE
UNFINISHED
SURFACE
C
C
A
B
B
E
2
2
2
2
7
Do you have any questions ? Missing small parts or hardware?
If you need assistance with the assembly of your 3 TIER
UTILITY CART please e-mail our Customer Service
Department at:
[email protected]
or call us at (508) 435-4830
or (800) 639-3803
Please include the following information in your email:
• Where item was purchased
• Item, model, style or SKU number listed on instructions
or box
• Part number, description of the part and quantity needed
This information will help us get the proper part to you faster
This unit is intended for use only with the
products and maximum weights indicated. Use
with other products or products heavier than the
maximum weights indicated may result in
instability causing possible injury. Furniture can
tip over or break if improperly moved. Have a
friend help to lift and carry the unit to it's new
location.
8
Top shelf weight
limit 127 lbs.
Shelf weight
limit 93 lbs.
Shelf weight
limit 93 lbs.
PHILLIPS
SCREWDRIVER
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Fourstar Group 11209737V User manual

Fourstar Group
Brand
Fourstar Group
Model
11209737V
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents