GM Lighting LTR-S-HO Series 8W High Output LED Tape User manual

Brand: GM Lighting

Model: LTR-S-HO Series 8W High Output LED Tape

Type: User manual

GM Lighting LTR-S-HO Series 8W High Output LED Tape features a high light output, making it suitable for various lighting applications. Its cuttable design allows for customization to fit specific needs, and it can be joined using GM Lighting SureTight or EZ Connectors for reliable connections. The tape requires installation in a GM Lighting mounting channel for proper thermal management and heat dissipation. It operates on a 24V LineDRIVE power supply, which is necessary to activate the 5-year warranty.

WARNING!

FAMILIARIZE YOURSELF WITH

INSTRUCTIONS BEFORE PROCEEDING.

USE ONLY GM LIGHTING

LineDRIVE 24VDC DRIVERS TO

ACTIVATE 5-YEAR WARRANTY.

FOLLOW ALL LOCAL CODES.

VERIFY THAT POWER IS OFF

BEFORE PROCEEDING.

LEDTask™ Flexible LED Tape

LTR-S-HO Series

8W High Output LED Tape

NOTE: WE RECOMMEND THAT YOU ENGAGE A QUALIFIED AND

LICENSED ELECTRICIAN. ALL SYSTEM PARTS ARE COMPATIBLE

WITH AND ONLY WORK TOGETHER. DO NOT ATTEMPT TO SWAP

OUT OTHER MANUFACTURERS PRODUCTS. INSURE THAT BOTH

WALL SWITCH AND LED DRIVER IS GROUNDED IN ACCORDANCE

WITH NEC OR LOCAL ELECTRICAL CODES.

DO NOT INSTALL IN AN APPLICATION THAT IS OUTSIDE OF THE

PRODUCTS LISTED AMBIENT TEMPERATURE AND IN AN AREA THAT IS

NOT EASILY ACCESSED FOR SERVICE REQUIREMENTS. DOWN LIGHT

IS IC RATED.

LAYOUT and PRE-CONFIGURE COMPONENTS

LTR-S-HO tape requires that it be installed in a GM Lighting

mounting channel for thermal management and heat dissipa-

tion. Prepare surface that channels and power supply will be

mounted on by making sure surface is free of dust or lint. Use

proper household or commercial cleaner, depending on surface

FIG. 1.

CONNECTING TAPE TO POWER

Connect leads provided on beginning of tape to 24V LineDRIVE

power supply (in order to validate 5-year warranty). Consult

power supply instructions on proper method of connection.

CUTTING TAPE

Cut tape to size only by cutting on the cut marks. Cutting

anywhere else on the tape will render your application useless

FIG 2.

JOINING TAPE SECTIONS TOGETHER

Joining tape sections together reliably requires that you use

either GM Lighting SureTight or EZ Connectors. Expose bottom

of tape by peeling back a small amount of adhesive FIG 3.

Insert end of tape into connector and if you are using a Sure-

Tight, tighten screws carefully FIG 4. If you are using an EZ

Connector, capture end of tape in open mouth of connector, and

then close until you hear an audible click FIG 5.

MOUNTING CHANNELS

Lay mounting channels on prepared surface and screw into

place FIG 6. Lay tape into channel using adhesive backing to

secure (remove red protective paper tape to expose adhesive).

Burnish with your ﬁnger or a wooden stick to form a tight adhe-

sive seal. Use channel lens if one is supplies.

®18700 Ridgeland Ave., Tinley Park, IL 60477

Toll-Free: (866) 671-0811 • FAX: (708) 478-2640

www.gmlighting.net

[email protected] LTR-S-HOinstructions_042522

C R I

VOLT DIM

DRY

LOCATION

FIELD

CUTTABLE

CLASS 24

TITLE 5 Yr.

WARRANTY

FIG. 1

Cut on mark

1/2”

Expose back of

strip before

connecting

SureTite Connector

Flip open

and seat tape

ﬁrmly under

terminals

FIG. 2

FIG. 3

FIG. 4 FIG. 5

LED-CHL-XD / XD-F

ONLY

RECESS

TAPE

SURFACE

IMPORTANT: COUNTER-SINK SCREWS

DRILL AND SCREW

FIG. 6

GM Lighting LTR-S-HO Series 8W High Output LED Tape User manual

Brand: GM Lighting

Model: LTR-S-HO Series 8W High Output LED Tape

Type: User manual

Download PDF

report

GM Lighting LTR-S-HO Series 8W High Output LED Tape User manual

GM Lighting LTR-S-HO Series 8W High Output LED Tape User manual

Related papers

Other documents