Atdec AWM-P75G Installation guide

Atdec
Brand
Atdec
Model
AWM-P75G
Category
Signal cables
Type
Installation guide

This manual is also suitable for

Atdec AWM-P75G

The Atdec AWM-P75G is a desk mount designed to hold a monitor or other compatible device. It features a sturdy post with guide marks for easy height adjustment and can be mounted to a variety of surfaces using the included fixing options. The clamp can be positioned at any desired height on the post, and the integrated cable cover helps keep cords organized and out of the way. Cable clips are also included to secure cables to the post.

The post has optional cable cover positions and guide marks to facilitate setting the height of each device in case you are installing multiple mounts. It also includes a post cap to protect the top of the post. Optional cable clips and covers are available for purchase.

Atdec AWM-P75G

The Atdec AWM-P75G is a desk mount designed to hold a monitor or other compatible device. It features a sturdy post with guide marks for easy height adjustment and can be mounted to a variety of surfaces using the included fixing options. The clamp can be positioned at any desired height on the post, and the integrated cable cover helps keep cords organized and out of the way. Cable clips are also included to secure cables to the post.

The post has optional cable cover positions and guide marks to facilitate setting the height of each device in case you are installing multiple mounts. It also includes a post cap to protect the top of the post. Optional cable clips and covers are available for purchase.

AWM-P G Page 1 of 2
Installation Guide
AWM-P G
Post with Guide marks
COMPONENT CHECKLIST
REQUIRED TOOLS
IMPORTANT INFORMATION
! Please ensure this product is installed as per these installation instructions.
! This product is compatible with Atdec AWM Series products.
! The manufacturer accepts no responsibility for incorrect installation.
• All tools provided
A
Post
(x1)
C
Screw
M8
(x2)
F
Cable clips
(not supplied
with all posts)
B
Post Cap
(x1)
E
Cable Cover
(x1)
(not supplied
with all posts)
D
Cable Cover Cap
(x1)
(not supplied
with all posts)
AWM-P G Page 2 of 2
Rear of Mounting
Surface
Rear of Mounting
Surface
Rear of Mounting
Surface
1. Attach Post to fixing (fixing sold seperately)
2. Mount Clamp to Post
4. Cable clips and cover
3. Position Cable Cover and fit Post Cap
2.2 Do not mount monitor arm on rear
channel post when using the following
desk clamps:
2.1 Slide clamp into post and position to
desired height. Turn knob to lock in place.
If you are installing multiple
mounts, use the guide marks on
post as reference for setting the
height of each arm. Final fine-tuning
may be required once monitor
is installed.
4.1 Push the cable down into
the cable clip.
4.2 Insert one side of the
cable clip into the channel on
the post assembly, then push
in the other side.
3.1 To reposition the cable cover, pull
it straight up and out of the post
and insert it into any of the available
channels
Optional cable
cover positions
3.2 Fit post cap onto the top of the post
Note: Cable cover does not come with all posts
Note: Cable clips do not come with all
posts. Additional clips sold separately.
No portion of this document or any artwork contained herein should be reproduced in any way without
the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer
reserves the right to alter specifications without notice. ©20200306
Cable Cover
Allen Key
(Supplied w/fixing)
Post Cap
Post
Note: An allen key
may be stored in
the Post Cap.
AWM-FF AWM-FH AWM-FC
FC
C Clamp
FB
Bolt
Through
Kit
AC-GC
Grommet
Clamp
FH
HD F Clamp
FF
F Clamp
FC
C Clamp
FB
Bolt
Through
Kit
AC-GC
Grommet
Clamp
FH
HD F Clamp
FF
F Clamp
AWM Fixing options
Bolt Through
Kit
AWM-FB
F Clamp
AWM-FF
Heavy Duty
F Clamp
AWM-FH
C Clamp
AWM-FC
Grommet
Clamp
AC-GC
1.1 Follow the installation
guide provided with your
xing to attach it to the post
and t it to the worksurface.
4.3 Loop cable and insert
into cable cover.
4.4 Feed remaining cable
into the cover.
Note: Guide marks only available on 400 post,
510 post and 750 post.
  • Page 1 1
  • Page 2 2

Atdec AWM-P75G Installation guide

Atdec
Brand
Atdec
Model
AWM-P75G
Category
Signal cables
Type
Installation guide
This manual is also suitable for

Atdec AWM-P75G

The Atdec AWM-P75G is a desk mount designed to hold a monitor or other compatible device. It features a sturdy post with guide marks for easy height adjustment and can be mounted to a variety of surfaces using the included fixing options. The clamp can be positioned at any desired height on the post, and the integrated cable cover helps keep cords organized and out of the way. Cable clips are also included to secure cables to the post.

The post has optional cable cover positions and guide marks to facilitate setting the height of each device in case you are installing multiple mounts. It also includes a post cap to protect the top of the post. Optional cable clips and covers are available for purchase.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents