1
USB DVB-S TVBox Installation Manual
Contents
V1.0
Chapter 1 : USB DVB-S TVBox Hardware Installation ...................................................................................2
1.1 Package Contents.................................................................................................................................2
1.2 System Requirements...........................................................................................................................2
1.3 Hardware Installation...........................................................................................................................2
Chapter 2 : USB DVB-S TVBox Quick Installation .........................................................................................4
Chapter 3：USB DVB-S TVBox Quick Uninstallation....................................................................................6
Chapter 4 : FAQ.................................................................................................................................................7
4.1 How to check if the driver has been installed successfully or not? .....................................................7
4.2 How to check if the Remote Control can work fine?...........................................................................7
4.3 How to uninstall all of device driver and software utility?..................................................................7
4.4 Remove old Version Applications........................................................................................................8
4.5 LiveUpdate icon...................................................................................................................................8
Chapter 5: Remote Control Description.............................................................................................................9
Note: For multi language installation manual, please install Adobe Acrobat Reader from autorun after
inserting the CD into the CD ROM. Click “Installation Manual” file where multi- language installation
manuals are in.
2
Chapter 1 : USB DVB-S TVBox Hardware Installation
1.1 Package Contents
Unpack your USB DVB-S TVBox package and make sure that all items are intact. The following items
should be included in your package:
z USB DVB-S TVBox (Model No# KW-UB365-S)
z Power Adaptor
z USB Cable
z Installation CD
z Quick Guide
z Remote Control
z Cyberlink combo CD
1.2 System Requirements
z TV: Digital Satellite Dish & LNB
z OS: Windows Vista (32Bit/64Bit)/XP
z CPU: Pentium IV 2.0GHz or Higher
z RAM: 512 MB or Higher
z HDD: 2GB or Higher
z Microsoft DirectX 9.0c or Higher
z Sound Card: AC97 Compatible
z Interface: USB 2.0
z CD-ROM Drive (For Software Installation)
1.3 Hardware Installation
Please follow the steps shown below for installation of your USB DVB-S TVBox and follow the pictorial
guide below for peripheral connections. Please don’t mistake the sequence.
1. Attach the DVB-S cable to RF connector.
2. Please attaché Power Adaptor to your Device and the socket.
3. Plug the USB cable to your computer and Device.
3
Note:
1. If HyperMedia can’t initial DVB-S function, it pop-up a dialog box.
2. Please unplug the USB cable.
3. Please reconnect your device to computer via USB cable.
4. Please re-execute your HyperMedia application and it will work properly.
4
Chapter 2 : USB DVB-S TVBox Quick Installation
The USB DVB-S TVBox package comes with complete Windows software utilities. These utilities can be
found on the CD-ROM in this package. During installation, it is highly recommended to disable any
sub-programs. These include applications such as antivirus software and system monitoring applications.
1. When you finish the hardware setup and restart your
system. The “Found New Hardware Wizard” window
will pop up. Please click “Cancel” and you can make use
of USB DVB-S TVBox Quick Installation for proper
installation.
2. Insert the installation CD into the CD ROM device. The
autorun page will appear as the left image. Please choose
“Multimedia software and driver”.
Note: If you already installed old version Application, Please
refer to Chapter 4 FAQ-4.4. Naturally you can skip the steps.
3. Please Choose“Quick Installation”.
5
4. Please read the End User License and click ‘’Next’’ to
continue.
5. The Quick Installation provides you with two choices to
install. If you want to install device driver and software
utility completely, please choose “Typical Installation”.
or if you want to install them partially, please choose
“ Custom Installation”. Finally click “Next ” to
continue.
6. This step will instruct you to install the remote control.
Please choose your owner remote control then Click
“Install” to continue.
7. All the drivers have been installed successfully. Please
choose “Yes, I want to restart my computer now” to
restart your computer (Recommend) and click “Finish”
to end the installation.
6
Chapter 3：USB DVB-S TVBox Quick Uninstallation
1. If you want to uninstall device driver and software utility,
please click “Quick Uninstallation”.
Note: You can also take another way to uninstall device driver
and software utility, please refer to chapter 4 FAQ-4.3.
2. The Quick Uninstallation provides you with two choices
to uninstall. If you want to uninstall device driver and
software utility completely, please choose “Typical
Uninstallation”. or if you want to uninstall them partially,
please choose “ Custom Uninstallation”. Finally click
“Uninstall” to continue.
3. All the drivers have been removed completely. Please
choose “Yes, I want to restart my computer now” to
restart your computer (Recommend) and click “Finish”
to end the uninstallation.
7
Chapter 4 : FAQ
4.1 How to check if the driver has been installed successfully or not?
Ans :Right click on “My Computer” on the desktop and choose “Properties”. Once in “Properties”
window, click on “Device Manager” in Hardware panel. Click on the plus icon of “Sound, video and
game controllers” to open the device list. See Fig. 1 below.
Fig. 1
4.2 How to check if the Remote Control can work fine?
Ans : 1) You have to check if the “Remote Control” utility is installed or not. Please refer to Fig. 2.
2) You have to check if the driver has been installed or not. See FAQ4.1.
3) You can check if the “Remote Control” tray icon is loaded in the right-bottom of task bar.
See Fig.3. below.
Fig. 2 Fig.3
4.3 How to uninstall all of device driver and software utility?
Ans：1) You can put the installation CD into CD-ROM device to execute “Quick Uninstallation”.
2) You can also follow the step (StartÆAll ProgramsÆKWorld MultimediaÆUninstallation) to
Uninstall. Please refer to Fig.4
Fig.4
8
4.4 Remove old Version Applications
1). The Install Wizard will detect HyperMedia version automatically. If you already installed an old
Version, it will pop-up a warning window. Please click “Ye s ” to continue. Otherwise click “No” to
reverse current version Application and install new driver.
4.5 LiveUpdate icon
Ans : Double click on “LiveUpdate” icon, then Please follow the on-screen instructions to update the latest
Driver/AP via internet.
9
Chapter 5: Remote Control Description
(Power)
Turns on/off the HyperMedia Program Source
Switch Video Source (Antenna,
Cable).
Zoom
Switch viewing modes (Full Screen/
Windows)
Shut Down Shut down the PC.
CH+/CH- Switches to the next/previous channel. VOL-/VOL+ Decrease/increase the volume.
Numeric
Keypad
Keypad for channel selection
Switch to the previously selected
channel
Enter Stop
Stop the playback or recording of
the current program.
Rec Record the current program. Mute Turn on/off the Audio.
Play Play or pause the recorded file.
Go to Start
Go to End
Go backward
Go forward
F1
(Red key)
Time-Shifting
F2
(Green key)
Sleep Timer
F3
(Yellow key)
Capture the on-screen image
F4
(Blue key)
Channel preview
/