Planex FX-08IM User's Manual And Installation

Brand
Planex
Model
FX-08IM
Category
Network switches
Type
User's Manual And Installation
8 Ports 10/100Mbps Switch
FX-08IM
Customer Satisfaction
If you have any question,welcome to contact us.(
Overseas Central Operation Office
7F, NO.108, Min-Chyuan Rd., Hsin-Tien, Taipei Hsien..
Tel:+(886)2-2219-1816 Fax:+(886)2-2219-0655
URL:http://www.planex.net E-mail: [email protected]
Head Office : Japan
PCI Bldg. 12-7 Nihonbashi-Ohdenmacho Chuo-ku, Tokyo103-0011
Tel : +(81)3-5614-1011 Fax : +(81)3-5614-1016
URL:http://www.planex.co.jp E-mail: [email protected]
Taiwan
02-2219-1816 02-2219-0655
http://www.planex.com.tw E-mail:[email protected]
Thailand
49/6 Soi Boonchusri, Dindaeng Rd., Samsennai,
Phayathai, Bangkok 10400 Thailand
Tel : +66-0-2644-8216 Fax : +66-0-2245-5362
URL:http://www.planex.co.th E-mail : [email protected]
Singapore
175 Bencoolen Street, #01-43 Burlington Square,
Singapore 189649.
Tel :+65 6333 4055 Fax :+65 6336 8158
URL:http://www.planex.net E-mail :[email protected]
Hong Kong
G/F , 274 Cheung Sha Wan Road ,
Sham Shui Po, Kowloon , Hong Kong
Tel : +(852)2708-7180 Fax : +(852)2708-9772
URL:http://www.ect.com.hk E-mail:[email protected]
8 Ports 10/100Mbps Switch
FX-08IM
USER'S MANUAL
FX-08IMFX-08IM
Safety Instruction
Unplug this product from the wall outlet before cleaning. Do not use
liquid or cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Do not use extra/optional attachments unless their use is recommended by
the product manufacturer. Doing so may cause hazards.
Do not use this product near water.
Do not place this product on an unstable cart, stand or table as the product
may fall, harming people as well as the appliance itself. When mounting
the product to a wall or shelf, be sure to follow the manufacturer's
instructions. You may only use a mounting kit approved by the
manufacturer.
Slots and openings on the back or bottom of the cabinet are provided for
ventilation to insure reliable operation of the product. The openings must
not be blocked as it may cause overheating. Do not place this product on a
bed, sofa, rug or any other similar surface. The product should never be
placed near or over a radiator or heat register. Similarly, this product must
not be placed in a built-in installation such as a bookcase unless proper
ventilation is provided.
This product should be used only with the appropriate power source
indicated on the marking label. If you are not sure which type of power is
supplied at your home, please consult your dealer or an electric power
company.
For added protection, turn off and unplug the product from the wall outlet
whenever it is left unattended or unused for a long period of time. This
will prevent damage to the product due to power surges.
Do not overload wall outlets or extension cords as this may result in a
short circuit or fire.
Do not attempt to insert any object via openings on the cabinet as it may
cause a serious electric shock or fire. Never spill a liquid of any kind on
the product.
Trademarks
Copyright @2002 PLANEX COMMUNICATIONS INC.
Contents subject to change without prior notice.
Pci is a registered trademark of PLANEX COMMUNICATIONS INC.
All other trademarks belong to their respective proprietors.
Copyrigh Statement
No part of this publication may be reproduced in any form or by any means
or used to make any derivative such as translation, transformation, or
adaptation without permission from PLANEX COMMUNICATIONS INC.
FCC Warning
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with this user's guide, may cause
harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
CE Mark Warning
In a domestic environment, this product may cause radio interference in
which case the user may be required to take adequate measures.
FX-08IMFX-08IM
Under any of the following conditions, promptly unplug the product from
the wall outlet and seek assistance from a qualified service center.
a. The power cord or AC power adapter is damaged (or frayed).
b. If liquid has been spilled into this product.
c. The product does not operate normally even though you followed
appropriate operating instructions. Adjust only those controls that are
covered by the operating instructions as improper adjustment of other
controls may result in damage and will often require extensive work by a
qualified serviceperson.
d. The product has been dropped or the cabinet has been damaged.
e. When this product exhibits a distinct change in performance, indicating a
need of repair.
When replacement parts are required, be sure to obtain parts specified by
the manufacturer. Unauthorized substations may result in fire, electric
shock or other hazards.
2
2
4
4
5
8
10
10
10
11
11
12
Chapter 1 Unpacking Information ................
Chapter 2 Product Description ......................
Model ................................................................
Front Panel ........................................................
The Rear Panel...................................................
Chapter 3 Installation ..........................................
Chapter 4 Optimizing Configuration ...........
Half- and Full-Duplex .......................................
Fast Ethernet .....................................................
Auto-Negotiation (N-Way) ...............................
MAC Address Table .........................................
Chapter 5 Product Specifications ................
4
1
2
3
4
2 1
2
3
Version:1.0_E
Chapter 1
Unpacking Introduction
21
FX-08IM
Open the shipping carton of the hub and carefully unpack its contents. The
carton should contain the following items:
One (1) Eight (8) ports N-Way Switch.
Power Cord.
This User's Guide.
Four (4) Rubber Feet.
If anything is missing, please contact your place of purchase.
Insert Graphic
1-1
1
1
Unpacking Information
43
FX-08IM
This FX-08IM (8) Ports Switch is a multi-speed, versatile network device
combining both standard and "Big-Pipe" ports under the same hood.The
number and types of ports are below.
Key Features
Eight (8) independent bandwidths with 10Mbps-200Mbps capability.
Eight (8) ports with Auto-Negotiation function.
Full wire speed Store-and-Forward technology instantly eliminates bad
packets.
All ports support Auto-MDI/MDIX which can detect and correct
crossover cables.
IEEE 802.3u and 802.3 standards compliant.
IEEE 802.3x Flow-Control support for Full-Duplex operation.
Back-Pressure support for Half-Duplex operation.
2M bits Buffer Memory.
Up to 8K MAC Address entry table.
Broadcast Storm Control.
Plug-&-Play with easy to read diagnostic LEDs.
2
1
Model
2 2
Front Panel
Chapter 2
Product Description
5
FX-08IM FX-08IM
6
Cabling
10Mbps - Category 3, 4 or 5 TP cabling can be used for transmitting data
at 10Mbps or 20Mbps on 10BASE-T networks.
100Mbps - Only Category 5 TP cabling can be used for transmitting data
at 100Mbps or 200Mbps on 100BASE-TX networks.
Note:
Category 5 TP cable is also recommended whenever installing new cabling.
Status LEDs
This Switch comes with a complete range of LEDs. The table below lists
each LEDs name, color, and a brief description of its function.
Power Connector
The power connector is designed to be used with the power adapter
included in the product package.
10/100Mbps TP Ports
Each port has supported for an Auto-Negotiation function and an Auto-
MDI/MDIX function that senses the attached device's maximum operating
bandwidth and automatically sets the connected port to operate at 10/100
Full-/Half-Duplex.
Port Connectors
Each TP port uses RJ-45 connectors that allow network TP cables to be
quickly attached or removed.
2
3
The Rear Panel
7
FX-08IM
8
Chapter 3
Installation
This Switch is "Plug-&-Play". It does not require software configuration.
Users can immediately use any of the features of this product simply by
attaching the cables and turning on the power.
Place the Switch on a clean, flat desk or table top close to a power outlet.
Insert the jack end of the power adapter into the Switch's power
connector.
Insert the plug end of the power adapter into a grounded power outlet.
109
FX-08IM
This Eight (8) ports N-Way Switch supports both Half- and Full-Duplex
modes for 10BASE-T and 100BASE-TX.
Half-Duplex: Data can not be transmitted and received at the same time.
Full-Duplex: Data can be transmitted and received at the same time.
Each port on this Eight (8) port N-Way Switch can detect and set the line's
operating mode by using their Auto-Negotiation function.
100BASE-TX is called "Fast Ethernet". In Fast Ethernet (100Mbps) data
travels ten times faster than in traditional Ethernet (10Mbps).
Below is a list of the cable types and connectors supported for 10BASE-T
and 100BASE-TX networks.
Note:
If your 10BASE-T network currently uses Category 5 TP cabling, you can
instantly upgrade the network to a 100BASE-TX network by changing
network devices. (i.e. Adapters, Hubs, etc.)
4
1
Half- and Full-Duplex
4 2 Fast Ethernet
Chapter 4
Optimizing Configuration
1211
FX-08IM
Each TP port has a built-in Auto-Negotiation function. This technology
automatically sets the best possible bandwidth as soon as a connection is
established with another network device (usually at Power "On" or Reset).
Auto-Negotiation functions by detecting the modes and speeds the attached
device is capable of.Upon network cable attachment, each TP port will
instantly set to operate as follows:
Note:
If the attached device is set to a Full-Duplex forced mode, it will not
connect to an Auto-Negotiation device.
Every Ethernet data packet includes both source and destination addresses.
This six (6)-Bytes ID is called the MAC (Media Access Control) Address.
This Switch can automatically learn and store up to 8K MAC addresses.
However, the MAC Address table is volatile: it disappears when the switch
is powered off or reset.
Note:
When the network needs reconfiguration, we recommend first turning
" O ff"the power. After all nodes have been moved, reconnect the Switch
back "On" to rebuild the internal MAC address table.
4 4
MAC Address Table
4
3
Auto-Negotiation (N-Way)
Chapter 5
Product Specifications
This warranty is valid for Taiwan Domestic Only.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Planex FX-08IM User's Manual And Installation

Brand
Planex
Model
FX-08IM
Category
Network switches
Type
User's Manual And Installation
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents