3M Cold Shrink QT-III Termination Kit 7655-T-150, CN, JCN Cable, 5-35 kV, Insulation OD 1.05-1.80 in, 1/kit
This kit is designed to terminate Jacketed Concentric Neutral (JCN) Cable and Concentric Neutral (CN) Cable for use with compression lugs or connectors. The kit includes a high-K, tracking resistant, silicone rubber termination, two strips of Scotch® Mastic Strip 2230, and an instruction sheet.
The kit is easy to install and can be used for 15 kV, 25/28 kV, and 35 kV applications. The 150 kV BIL meets the impulse requirements for 35 kV class equipment where indoor terminations are used.
3M Cold Shrink QT-III Termination Kit 7655-T-150, CN, JCN Cable, 5-35 kV, Insulation OD 1.05-1.80 in, 1/kit
This kit is designed to terminate Jacketed Concentric Neutral (JCN) Cable and Concentric Neutral (CN) Cable for use with compression lugs or connectors. The kit includes a high-K, tracking resistant, silicone rubber termination, two strips of Scotch® Mastic Strip 2230, and an instruction sheet.
The kit is easy to install and can be used for 15 kV, 25/28 kV, and 35 kV applications. The 150 kV BIL meets the impulse requirements for 35 kV class equipment where indoor terminations are used.
3M Cold Shrink QT-III Termination Kit 7655-T-150, CN, JCN Cable, 5-35 kV, Insulation OD 1.05-1.80 in, 1/kit
This kit is designed to terminate Jacketed Concentric Neutral (JCN) Cable and Concentric Neutral (CN) Cable for use with compression lugs or connectors. The kit includes a high-K, tracking resistant, silicone rubber termination, two strips of Scotch® Mastic Strip 2230, and an instruction sheet.
The kit is easy to install and can be used for 15 kV, 25/28 kV, and 35 kV applications. The 150 kV BIL meets the impulse requirements for 35 kV class equipment where indoor terminations are used.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI