eRapta AY7 User manual

Brand: eRapta

Model: AY7

Category: Car video systems

Type: User manual

eRapta HD Wired 7" Backup Camera System

Installation and Operation Guide

(AYYY7)

If you have any issues or needs, please contact us at:

sales2@erapta.com

INSTRUCTIONS MANUAL

PLEASE NOTE:

Before operating this backup system, please read these

instructions completely.

We recommend that you retain this guide with the system as a

ready reference.

If you have any questions, or if you require technical support,

please contact us at this email address: sales2@erapta.com

We will respond within 24-hours to provide you with the support

you require.

Please record our email for future reference, if needed.

If you encounter the following:

1. When opened, it is found to be defective or missing parts;

2. You don’t like it when you received;

3. Need technical support and help during the installation process;

4. Camera or monitor gets accident during use;

5. You order a wrong item;

6. Any other after-sales problems that need help.

Please contact us in time, we will provide you with the best service

and technical support, and solve the problems.

This is our contact Email: sales2@erapta.com (24 hours online)

INSTRUCTIONS MANUAL

Table of Contents

1. WHATS IN THE PACKAGE ................................................................. 1

2. SPECIFICATIONS.................................................................................2

3. SAFETY PRECAUTIONS ..................................................................... 2

4. SYSTEM INSTALLATION ....................................................................3

4.1 Installation Diagram........................................................................4

4.2 Installation of the Camera ...............................................................5

4.3 Installation of the Monitor.............................................................. 6

5. SYSTEM OPERATION ..........................................................................7

5.1 Monitoring Operation ..................................................................... 7

5.2 Settings Operation...........................................................................8

5.3 Parking Guidelines Operation .......................................................10

5.4 Remote Control Operation ............................................................ 11

6. TROUBLESHOOTING ........................................................................ 11

7. WARRANTY ........................................................................................ 13

INSTRUCTIONS MANUAL

1. WHATS IN THE PACKAGE

Make sure your package includes the following listed items

completely. If any item is damaged or missing, contact us at

[email protected]. It would be better if you write down the order

number from Amazon, include photos of the damaged or

missing part in your email, so that we can handle the problem much

more quickly.

INSTRUCTIONS MANUAL

2.SPECIFICATIONS

Monitor

LCD Size

7 inch Monitor

Monitor Cable

1.69ft

Connector Type

4-pin

Item Weight

2.025 pounds

Power Supply

DC 12V

Monitor Working Current

250 mA

Monitor Dimensions

7.2(L)*4.73(W)*0.78(D) inches

Camera

Image Sensor

AHD CMOS

Camera Working Current

200 mA

Effective Pixels

1920(H)x 1080(V)

Waterproof Rating

IP69K

Material

Metal

Operating temperature

-4°F~ 149°F

Extension cable

4pin connector

32.8ft

3. SAFETY PRECAUTIONS

Incorrect installation might cause personal injury or property damage.

Contact eRapta customer service for assistance if needed.

NOTE: Handle all components with care. Inspect regularly to avoid

damage to components and cabling.

INSTRUCTIONS MANUAL

NOTE: Do not apply excessive force to any of the components

contained within this kit. Otherwise, it might result in damaged or

non-functional parts.

● Do not disassemble or attempt to repair any part of the camera

system.

● Children should be supervised to ensure that they do not play with

the appliance.

● To avoid an electrical shock hazard, relevant actions should be

performed by qualified and certified professionals. Disconnect all sources

of power to the camera before installing.

● To reduce the risk of fire, no test when smoking. No use a flame.

● Use this product within the voltage range specified. Failure to do so

can cause electronic shock or product malfunction.

● Where the power cable may press a metal case, cover the cable with

a friction tape. A short circuit or disconnected wire may cause a fire.

● Do not install the monitor where it may obstruct drivers view or

obstruct an air bag device.

● Do not operate the monitor while driving, as it may cause an

accident.

● Dropping the unit may cause possible mechanical failure.

4.INSTALLATION

•Ensure the power supply circuit has circuit protection

•Use insulated tools when working with power supply

•Use correct safety equipment when working at elevated levels

•Do not allow water to enter the LCD Display

•Excessive heat can be caused by a loose connection

4.1 Installation Diagram

Connect the 12V Car Charger to the DC female connector of the

extension cable.The 4-pin connector to the camera and monitor as

the schematic showed.

INSTRUCTIONS MANUAL

4.2 Installation of the Camera

4.2.1 Take off your rear license plate.

Using a screwdriver, remove each of the screws holding your rear

license plate in place. Then, pull the plate off and set it aside.

NOTEE : Make sure you place the screws in a safe place so you

don’t lose them.

4.2.2 Drill a small hole in the license plate mounting area

Drill a small hole in the license plate mounting area so you can run the

cable into the trunk.

Hold your camera up to the area you intend to mount it to figure out

where to make the hole and mark the fixed position and note the spot

where its splitting cord sits.

INSTRUCTIONS MANUAL

Then, create a small hole in the car using a power drill. Line up your hole

so it is directly behind where your camera’s power cable will go.

NOTEE :The hole doesn't have to be very big, just large enough for

the cable. (It is about a 1⁄8 or 1⁄4 inch hole)

NOTEE : Ensure that there are no obstructions between the

license plate mount and the rear wiring chamber and you're not

drilling into anything you shouldn't be.

NOTEE : If you come across any obstructions, try to remove them. If

you can’t, see if you can make a hole nearby.

4.2.3 Run the camera cable from outside of the car into the trunk of

your car.

Attach the camera cable you ran through the hole to the single 4pin

connector of the extension cable. Run the other end (the 4pin connector

and a DC female connector) of the extension cable to the front of the car.

4.2.4 Connect the monitor cable to the 4pin connector and attach the

DC female connector to the car charger.

4.2.5 Plug the car charger into the car socket and test the system to

make sure everything works.

4.3 Installation of the Monitor

4.3.1 Via Suction Cup

Place the locking screw and suction cup on the back of the monitor and

adjust the monitor to the desired viewing angle. Then tighten the locking

screw to secure the monitor.

Clean the area on the windshield or dashboard where the suction cup base

is to be mounted. Press the suction cup base against the windshield or

dashboard and move the locking lever towards the suction cup base.

INSTRUCTIONS MANUAL

Connect the monitor cable to the 4pin connector.

4.3.2 Via Fixed Bracket

Place the locking screw and fixed bracket on the back of the monitor and

adjust the monitor to the desired viewing angle. Then tighten the locking

screw to secure the monitor.

Clear the dashboard to fix the sticky sticker on the dashboard and put the

screen on it.

Connect the monitor cable to the 4pin connector.

NOTE:

1.Some states or local governments may have regulations or laws that

restrict the use of anything that might impair the clear view of a license

plate. Check local laws for compliance.

2.These instructions are only meant as a general guide due to the number

of different makes and models of vehicles. For vehicle-specific questions,

contact your vehicle's manufacturer.

3.This backup camera fits a standard license plate hole for US. If you

choose not to mount it on your license plate, locate a good place to mount

the camera. Make sure that the camera’s field of vision is free of

obstructions (bumpers, hitches,etc.).The camera should be positioned as

close to the center of the vehicle as possible.

INSTRUCTIONS MANUAL

5.OPERATING INSTRUCTION

5.1 Monitoring Operation

Screen switch button: Please ignore this button

Confirm / Move down/ Parking guidelines button:

Turn on/off the parking guidelines.

Menu button:

Settings for Parking Guidelines/PIC/CAR/MODE/SYS

Decrease button/Move to the left

Increase button/ Move to the right

Power button:Turn on / off the monitor and standby.

INSTRUCTIONS MANUAL

5.2 Settings Operation

The following graphic illustrates the layout of the software management

system (SMS) panels and their associated sub-panels. Please note that

you can press the buttons of monitor or use the remote to access or

modify the SMS panels. While they may appear to be complicated, they

are not.

Main-panels

Sub-panels

PIC

brightness/contrast/saturation

CAR

car line/car delay

MODE

rotate zoom/ mirror 1/mirror

SYS

language/ screen save /reset/version

NOTE:

button is the on/off button for the parking guidelines. When the

auxiliary line is off, press the menu button once to enter the menu

When the auxiliary line is on, press the menu button four times to

enter the menu system

5.2.1 PIC

Press Press PIC Press / (on/ off)

Press (into next time setting) Press (return to the menu )

5.2.2 CAR

Press Press CAR Press Press /

(to increase or decrease) Press (into next time setting) Press

INSTRUCTIONS MANUAL

(return to the menu )

CAR LINE : There are 3 styles for chosen: Mode1, Mode2, Mode3,

OFF

CAR DELAY :This is the reverse delay, you can choose: 3s, 6s, 9s,

Off.

5.2.3 MODE

Press Press Press MODE Press /

(on/ off) Press (into next time setting) Press (return to

the menu

ROTATE :This can be flipped up, down, left and right according to

your needs

ZOOM : This is to adjust the screen ratio 16:9 /4:3

Mirror 1: This is the mirror function of the camera.

Mirror 2: Please ignore the setting.

5.2.4 SYS

Press Press SYS Press Press /

(on/ off) Press (into next time setting) Press (return to

the menu )

INSTRUCTIONS MANUAL

LANGUAGE : There are many language: English/简体中文/繁体中

文/Japanese/Korean, it defaults to English.

SCREEN SAVE:1/3/5 minutes

5.3 Parking Guidelines Operation

Press the button to adjust the parking guidelines if guidelines

function was on.

Note: Setting the parking guidelines’shape or position when the

top right shows H/ V/ M.

H means Horizontal moving the lines .

Press Menu button 1 time: enter H adjust

mode, then press /to move the lines

to the left or right. Wait 15 seconds to

confirm and exit setup mode automatically.

V means vertical moving the lines.

Press Menu button 2 times: enter V adjust

mode, press /to move the lines up

or down.Wait 15 seconds to confirm and exit

setup mode automatically.

W means the width of the lines.

Press Menu button 3 times: enter W adjust

mode, press /to adjust its width.

Wait 15 seconds to confirm and exit setup

mode automatically.

INSTRUCTIONS MANUAL

5.4 Remote Control Operation

(1) POWER: Turn On/ Off

(2) Video Select: Channel switch

(3) Menu: Go in setting page

(4) Mode Select: Channel switch

(5) ▲ Down/ Decrease

(6) ▼Up/ Increase

6.TROUBLESHOOTING

6.1 Why is the monitor in black screen?

It may cause by loose or improperly connected wires, please check

the connection. Check if the ground to the camera was slightly loose,

and try to get the ground wire secured better

Check if the display is powering on. Press the power button to see if

the display turn on. If you are sure the monitor has power and it

does not respond to the on/off button, then disconnect it from the

power and reconnecting.

Check there is 12v going to the monitor.

If there is still no improvement, maybe the screen has been

subjected to some collision during transportation or use, please

6.2 Why is the monitor no signal or blue?

Do a hard reset, unplug all cables,leave out for 1 minute and then

re-connect them.

INSTRUCTIONS MANUAL

Ensure the connection to the camera is tight enough.

Verify the red positive trigger on power harness cable is put to

power 12v+.

Check the pins of the 4 pins cable of the camera if it’s aligned or

broken. If the pins are awkward, you can gently straighten it. If

there is a short in the cable, please contact us for replacement cable.

Check the fuses to ensure everything is connected (without

blown) and going and tracing the wiring and cables from the camera

to the display. Check for broken wires in harness.Confirm the

camera LED be on.

If there is still no improvement, maybe the screen has been

subjected to some collision during transportation or use, please

6.3 Why does the camera gets blurry or foggy?

Check the external lenses. Clean them by simply wiping off the dirt.

Check if there any loose or faulty connections triggering such

mishaps.

There is moisture inside the camera’s lenses. The changes between

high and low temperature will cause fogging problems, just wait a

few hours and it will return to normal.

If there is still no improvement, maybe the camera has been

subjected to some collision during transportation or use,or it is a

defective product,please contact us and we will help you:

[email protected]

6.4 Why does the camera have black and white image?

Fraying wires or faulty connections can cause a flashing black and

white camera. Make sure all of the cables and connections in your

backup camera system are fully connected and check if there is any

damage.

6.5 What if anything defective or lost when I open the package?

INSTRUCTIONS MANUAL

If you have any accessory damage or problems with your camera,

please feel free to contact us :[email protected]

6.6 What should I do if the camera is flooded?

Some cameras may accidentally enter water due to heavy rain or

when washing the car, which will make the screen appear blurry.

Under normal circumstances, the moisture in the camera will

dissipate on its own. If it does not subside for a period of time,

please contact the after-sales service for a replacement.

6.7 After installation, the image has obvious distortion and stripes

flickering.

This may be caused by unstable voltage, please contact us and we

will send you a replacement rectifier.

NOTE:

Please tell us more details about your questions or problems.

If you don’t mind, it would be better to attach pictures or videos.

Please provide the Amazon order ID of the product you purchased

All the message will be replied within 24 hours, please wait kindly.

INSTRUCTIONS MANUAL

7. Warranty

eRapta offers a full 24 months warranty and replacement policy. We also

provide lifetime technical support to ensure that you enjoy your modern

backup camera for many years to come.

To obtain warranty support, or if you are not satisfied in any way, or have

any issues with your purchase, please contact us first for help, to instead

of return or negative content.

We promise that you will receive the best service from us, and we will try

our best to help you until your problem solved.

Every message will be replied within 24h. Our contact email is:

[email protected], you can write it down or add it to your address

book.

Contact Email:[email protected]

Contact Name:eRapta Support Department

eRapta AY7 User manual

Brand: eRapta

Model: AY7

Category: Car video systems

Type: User manual

Download PDF

report

eRapta AY7 User manual

eRapta AY7 User manual

Related papers

Other documents