Type S BT532629 User manual

Brand: Type S

Model: BT532629

Type: User manual

Type S BT532629 Solar-Powered Wireless Backup Camera enhances rear visibility with its adjustable lens for a customized view. Installation is simple with included accessories for various vehicle types. This durable IP65-rated camera operates in temperatures from 14ºF to 122ºF and features a long-lasting 5200mAh battery. Its wireless range extends up to 33 feet, providing clear video transmission with minimal interference.

Important, retain for future reference:

Read carefully

SOLAR-POWERED

WIRELESS BACKUP CAMERA

With Adjustable Lens To Enhance Rear View Visibility

ITM. / ART. 1558902

WP ITM. BT532629

Care & Use Instructions

TABLE OF CONTENTS

1. Introduction ..........................................................................................................................................................................1

2. Package Contents ...............................................................................................................................................................2

3. Product Specications ......................................................................................................................................................3

4. Before You Install ..................................................................................................................................................................4

5. Installation Guide ................................................................................................................................................................ 4

6. Settings and Operation ..................................................................................................................................................10

7. Safety Information ............................................................................................................................................................15

8. Maintenance & Warranty ................................................................................................................................................18

9. General Information .........................................................................................................................................................21

Please read all of the installation instructions carefully before installing the product. Improper

installation will void manufacturer’s warranty. The installation instructions do not apply to all types of

vehicles, and are written as guidelines to assist in installing the system.

Consult an experienced technician if you are not comfortable installing the product. You can also

contact TYPE S at 866.294.9244 to speak to one of our installation specialists if you have any specic

questions regarding the Wireless Backup Camera.

BEFORE using the Solar-Powered Wireless Backup Camera - With Adjustable Lens To Enhance

Rear View Visibility, please read the safety information provided in this user manual. ALWAYS

use the product as outlined in this user manual.

Please make sure to read and understand all local laws and regulations regarding cameras and their

use in a vehicle. Laws vary by state.

1. INTRODUCTION

1. 6.8” Motion Activated

HD Monitor

2. Solar-Powered Wireless Backup Camera

3. 12V / 24V Power Adapter

4. 250V 2A Spare Fuse

5. Windshield Mount

6. 33” MicroUSB Charging / Data Cable

7. 2 x License Plate Machine Screw (Optional)

2 x License Plate Self-Tapping Screw (Op-

tional)

8. 2 x Two Way Mounting Tab (Optional)

9. 2 x Mounting Screw & Nut (Optional)

10. Dash Mount

11. Instruction Manual

12. Quick Install Guide

13. Warranty Card

2. PACKAGE CONTENTS

11.

10.

12.

13.

3. PRODUCT SPECIFICATIONS

Frequency: 2.4GHz

Operating Voltage: Monitor - DC 12V/24V, Backup Camera - DC 5V

Operating Temperature: 14ºF~122ºF (-10ºC~50ºC)

Camera Water Resistance: IP65 Rating

Battery Capacity: 5200mAh (Minimum Capacity 5000mAh)

Maximum Signal Range: 33 Feet / 10 Meters

(without interference or obstruction)

Solar-Powered Wireless Backup Camera

DC 12 / 24V input

Micro USB input

(not for power input)

Power Button

6.8” Motion Activated HD Monitor

Power Button

LED Indicator

Motion Detection Sensor

Solar PanelSolar Panel

Please charge and test the Camera / Monitor before you install on your vehicle.

1. Fully charge camera. Fold back camera power port plug and insert included charging cable. Most

AC wall adapters will work with the USB charging cable.

2. Plug in monitor, power on camera, and test connection. (Camera and monitor come pre-paired)

1. Remove the backing tape on the Dash Mount and attach it to the dashboard. Place the suction

cup of the Windshield Mount on top of the Dash Mount and push the knob counter clockwise to

lock in place.

2. Attach Dash Monitor to the Windshield Mount and adjust to your desired position.

3. Adjust the tube of the Windshield Mount so the base of the Dash Monitor is touching the surface

of the dashboard in order to reduce vibration rattling.

DASH MONITOR INSTALLATION  DASH MOUNT

1. 2. 3.

5. INSTALLATION GUIDE

4. BEFORE YOU INSTALL

1. Take the 12V/24V power adapter and plug adapter

into the right side of the Dash Monitor. Plug the

other end into 12V/24V power port in your car.

2. Now, the Dash Monitor is ready to be activated

by the motion trigger when you wave your hand

in front of the monitor or tap once on the Dash

Monitor screen.

WARNING: Many vehicles provide constant power to the

12V outlet. If your outlet provides constant power,

please remember to unplug the Dash Monitor when

not in use to avoid draining the vehicle battery.

1. Place the Windshield Mount on the windshield and push the knob counter clockwise to lock in place.

2. Attach Dash Monitor to the Windshield Mount and adjust to your desired position.

3. Adjust the tube of the Windshield Mount so the base of the Dash Monitor is touching the surface of

the dashboard in order to reduce vibration rattling.

DASH MONITOR INSTALLATION  WINDSHIELD MOUNT

POWER UP THE DASH MONITOR

CHARGING THE SOLARPOWERED WIRELESS

BACKUP CAMERA

1. 2. 3.

Fold back camera power port plug and insert included charging

cable. Most AC wall adapters will work with the USB charging cable.

12V/24V

Power adapter

SOLARPOWERED WIRELESS BACKUP CAMERA INSTALLATION

A STANDARD INSTALLATION:

*Please follow your local laws and regulations regarding constant monitoring while driving. It is

recommended that you glance at the image only when in reverse, and use as an aid. Do not rely

solely on the camera view to back up.

2. Secure the Solar-Powered Wireless Backup

Camera and license plate with screws back

onto the rear of your vehicle.

Blue LED light

4. Power on the Monitor with the 12V/24V

adapter. You can see the parking view when

you wake up the Wireless Backup

Camera by tapping once on the screen or

motion trigger in front of Monitor.

3. Push and hold the power button of

the Solar-Powered Wireless Backup

Camera for 1 second, the blue LED

light will ash 2 times.

1. Unscrew your license plate.

B LOWERING INSTALLATION  FOR VEHICLES WITH TRUNK OR HATCH DOOR RELEASE

1. Unscrew and remove your license plate.

2a. Unscrew and detach the original

Mounting Tabs from the back of the

Solar-Powered Wireless Backup Camera.

3. Install the license plate onto the Wireless

Backup Camera with the Mounting Screws &

Nuts.

4. Secure the Solar-Powered Wireless Backup

Camera with the license plate back onto the rear

of your vehicle.

2b. Install the Two Way Mounting Tabs onto

the Solar-Powered Wireless Backup Camera.

(This allows more clearance for nger tips to release door latch)

C RAISED INSTALLATION  FOR TRUCKS & SUV WITH STEP BUMPERS

1. Unscrew and remove your license plate.

3. Finally, install the Wireless Backup

Camera and license plate onto the rear of

your vehicle and tighten the Mounting Nuts

with a wrench.

2. Install the Two Way Mounting Tabs using

original Plates Screws and Mounting Screws.

Warning: Lower tailgate on pickup trucks slowly and check for minimum ¼ inch clearance between

gate and top of camera frame. This check is because some bumpers are installed higher than others.

(This will raise the camera frame out of the cavity of the step bumper)

Original Plate Screw

Step Bumper

Mounting

Screw

Two Way

Mounting Tab

Mounting

Nut

ADJUSTING CAMERA LENS ANGLE

The camera’s viewing angle can be adjusted to provide improved visibility, especially for large SUVs, or lifted

trucks. Tilt the camera up or down for preferred viewing angle.

20º

40º

6. SETTINGS AND OPERATION

SPLIT SCREEN

If you purchase one set of Solar-

Powered Wireless Backup Camera

- With Adjustable Lens To Enhance

Rear View Visibility (BT532629) and

extra Solar Powered Backup Camera

(BT56780), you can tap on the Split

Screen icon to switch between

dierent screen modes after you

pair the extra camera with the Dash

Monitor.

BATTERY INDICATOR

The battery indicator shows the

battery level of the Wireless Backup

Camera.

NOTE: Fully charge and test the

camera before operation.

NOTE: Other than BT532629,

BT530033, BT57132 and BT56780,

DO NOT pair this monitor with other

TYPE S backup cameras.

The 6.8” Motion Activated HD Monitor contains touch panel; all the operations can be done by tapping

and swiping on the monitor screen. Tap on the Tips icon for on-screen instructions. Push the power

button on the side to turn o the Dash Monitor while driving. NOTE: Please remember to turn the Dash

Monitor back on once the vehicle is stopped and ready to reverse.

Power

Button

PAIRING

The Solar-Powered Wireless Backup Camera is pre-paired with the Monitor, and it is set as rear camera as

default. You should see the following screen that shows the rear view if the Dash Monitor is powered and

the Solar-Powered Wireless Backup Camera is fully charged.

If you can not see camera image showing on Dash Monitor, pair the Camera with the following steps:

1. Press and hold the Power Button under the

camera for 6 seconds, or until the LED ashes

Blue continuously. The camera will be turned

on and enter Pairing Mode for one minute.

2. Or press and hold the Power Button for 5

seconds to enter Pairing Mode if the camera

is already on.

3. On the Dash Monitor, tap

the Settings icon and then

tap Pair Camera to enter

the pairing screen. Tap Front/

Rear Camera - Click to pair.

Blue LED light

4. The camera should be paired

within 30 seconds. If the pairing

is successful, the display will

show “Pair OK”.

5. If no camera is found, then the

display will show “Pair Fail”. In this

case, cut o power and reboot

the Dash Monitor. If you keep

receiving the “Pair Fail” message

after several attempts, please call

our technical support to assist in

troubleshooting.

ROTATE CAMERA

Tap on the setting to reverse the

camera view.

BRIGHTNESS

Swipe to adjust screen brightness

CONTRAST

Swipe to adjust screen contrast

OPERATION TIME

Tap to choose dierent operation

time. The Dash Monitor’s parking view

operation time will start to count down

when you wake up the Solar-Powered

Wireless Backup Camera. When the

timer runs out, the parking view will

automatically switch to stand-by mode.

MOTION DETECTION

Tap to choose motion detection range.

Motion detection range can help you

adjust the detection distance between

you and the Dash Monitor when you

drive. You can also disable the function

by turning it o.

PARKING AID LINE

You can turn ON/OFF the parking aid

line by tapping the icon.

Hold 1 second and swipe up and

down to adjust the parking aid line.

BACKUP CAMERA POWER, MODES & LED INDICATORS

Power / Mode Status LED Indicators

Power On

Press and hold Power button for 1 second, Camera will power on.

Blue LED light ashes 2 times when Camera is powered on.

Power O

Press and hold Power button for 2 seconds and release, Camera will

power o.

Red LED light ashes 1 time when the Camera is powered o.

Pairing Mode

To begin Pairing Mode, press the Power button on Camera until

blue LED light ashes quickly. Now Camera is in Pairing Mode.

Blue LED light ashes quickly for 1 minute or until pairing success

is complete.

Low Battery Power O

Camera will power o when the battery is used up.

Red LED light ashes to indicate low battery.

USB Charging

This LED light is next to the MicroUSB port.

While charging, the Red LED light will remain solid. When Camera is

fully charged, Red LED light turns o.

DASH MONITOR INDICATOR

If you see this message on the Dash

Monitor, that means the battery of

the Solar-Powered Wireless Backup

Camera is lower than working voltage.

Please fully charge the camera.

ADJUST CAMERA VIEW

Swipe up and down to adjust view.

NOTE: You cannot adjust the parking

aid line and camera view in the split

screen mode.

WARNING: A failure to read and follow these warnings and instructions may result in a serious

accident, including damaged property or a serious injury, including loss of life.

• The Solar-Powered Wireless Backup Camera is designed as an aid to the driver in detecting large

stationary objects to help avoid damaging the vehicle. However, you, the driver, must use it

safely and properly. Use of the Solar-Powered Wireless Backup Camera is not a substitute for safe,

proper and legal driving.

• Never back up while looking only at the screen. You should always check behind and around the

vehicle when backing up just as you would if the vehicle did not have the Solar-Powered Wireless

Backup Camera. Always make sure your intended path is clear. If you back up while looking only

at the Monitor, you may hit a vehicle, pedestrian, bicyclist, child, pet or other object resulting in

injury or death. Always back up slowly.

IMPORTANT SAFETY INSTRUCTIONS

1. SAVE THESE INSTRUCTIONS– This manual contains important safety and operating instructions of

car charger for Model BT532629.

2. Before using the product, read all instructions and cautionary markings.

3. Do not expose car charger to rain, moisture, or snow.

4. Use of an attachment not recommended or sold by the product manufacturer may result in a risk

of re, electric shock, or injury to persons.

5. To reduce risk of damage to cigarette lighter connector and cord, pull by cigarette lighter

connector rather than cord when disconnecting car charger.

6. Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to

damage or stress.

7. Do not operate car charger with damaged cord or cigarette lighter connector – replace it

immediately.

8. Do not operate car charger if it has received a sharp blow, been dropped, or otherwise damaged

in any way; take it to a qualied serviceperson.

9. Do not disassemble car charger; take it to a qualied serviceperson when service or repair is

required. Incorrect reassembly may result in a risk of electric shock or re.

10. To reduce risk of electric shock, unplug charger before attempting any maintenance or cleaning.

Turning o controls will not reduce this risk.

7. SAFETY INFORMATION

• Never depend on the Solar-Powered Wireless Backup Camera entirely when backing up. The

image on the screen is dierent from actual conditions. Objects viewed in the Dash Monitor dier

from actual distance because a wide-angle lens is used. Objects in the Dash Monitor will appear

visually opposite than when viewed in the rear view and outside mirrors. Use the inside mirror or

glance over your shoulder to properly judge distances to other objects.

• The Solar-Powered Wireless Backup Camera “night vision” feature that is high performance

brightness with colorful image is an aid to a driver but is limited. Always use your own eyes to

conrm the vehicle’s surroundings, as the displayed image may be faint or dark, distorted, or

not entirely visible. Always check behind and all around the vehicle visually with mirrors before

proceeding.

• The area displayed by the Solar-Powered Wireless Backup Camera is limited. The Solar-Powered

Wireless Backup Camera does not display objects that are close to or below the bumper,

underneath the vehicle, or objects out of the Camera’s eld of view. The area displayed on the

screen may vary according to vehicle orientation or road conditions.

• Be sure to check the Camera’s position and mounting angle before each use.

• Make sure the trunk, hatch, or backdoor is completely and securely closed when backing up.

• If the back of the vehicle is hit, the position and mounting angle of the Solar-Powered Wireless

Backup Camera may change.

• When washing the vehicle with high pressure water, be sure not to spray it around the Solar-

Powered Wireless Backup Camera. Otherwise, water may enter the Camera unit causing water

condensation on the lens, a malfunction, re or an electric shock.

• Do not strike the Solar-Powered Wireless Backup Camera. It is a precision instrument. Otherwise,

it may malfunction or cause damage resulting in a re or an electric shock.

• This product will only provide images of items that are within the eld of view of the Solar-

Powered Wireless Backup Camera. Thus, it is imperative that the Solar-Powered Wireless Backup

Camera should be kept clean and unobstructed, and should be mounted so that its eld of view

includes the entire area behind your vehicle.

• Adhere to all applicable trac laws and motor vehicle regulations applicable to the device.

• Consult local laws and regulations for any restrictions on installation or use.

• Never allow children to play with the device. Small parts may be a choking hazard.

• There is a plastic cover over the Solar-Powered Wireless Backup Camera. Do not scratch the cover

when cleaning dirt or snow from the cover.

• The Solar-Powered Wireless Backup Camera has a water resistant construction. Do not detach,

disassemble or modify it. This may cause incorrect operation. Solar-Powered Wireless Backup

Camera is waterproof.

• Do not submerge Solar-Powered Wireless Backup Camera in water, which can cause internal

damage to the Camera.

• If the temperature changes rapidly, such as when hot water is poured on the vehicle in cold

weather, the system may not operate normally. The Digital Camera can withstand the eects of

rain, snow, and inclement weather.

• When strong light directly enters a camera, objects may not be displayed clearly.

• The screen may icker under uorescent light.

• The colors of objects on the Dash Monitor may dier somewhat from those of the actual object.

• If dirt, rain or snow attaches to the Camera, the Monitor may not clearly display objects. If water

droplets, snow or mud adhere to the Camera lens, rinse with water and wipe with a dry cloth.

• Do not use alcohol or thinner to clean the Camera. This will cause discoloration. To clean the

Camera, wipe with a clean cloth dampened with mild cleaner diluted with water and then wipe

with a dry cloth.

• Will work up to 33 feet.

• ALWAYS engage Parking/Emergency/Hand Brakes of the vehicle when testing the system.

SAFETY AROUND AND BEHIND OTHER VEHICLES

Using a Solar-Powered Wireless Backup Camera is not enough to completely overcome a vehicle’s

blind spot. Many preventable injuries and deaths occur in driveways or parking lots when drivers do

not see children, pets, or others near their vehicles. Here are a few safety tips that will help you to

avoid a back-over accident:

• Walk completely around your vehicle before getting in. Check for kids, toys, and pets before

entering the vehicle and starting the engine.

• Know where children are. Have children stand in a place where they are in full view.

• Be aware of young children. Young children are small and hard to see.

• Parents, caregivers and all adults need to be vigilant in supervising children, especially when

children are in the yard, driveway or parking lot playing near parked cars.

8. MAINTENANCE & WARRANTY

CLEANING

• If dirt, rain or snow attaches to the Camera, the Monitor may not clearly display objects. If water

droplets, snow or mud adhere to the Camera lens, rinse with water and wipe with a dry cloth.

• Do not use alcohol, benzene or thinner to clean the Camera. This will cause discoloration. To clean

the Camera, wipe with a clean cloth dampened with mild cleaner diluted with water and then

wipe with a dry cloth.

WARRANTY

• TYPE S

LIMITED WARRANTY

TYPE S warrants, to the original purchaser, that its products are free from defects in material and

workmanship for 1 year from the date of original purchase. Where permitted by law, TYPE S’s

liability shall be limited to that set forth in this limited express warranty. This limited express

warranty shall be the exclusive remedy of the purchaser and TYPE S makes no other warranty of

any kind aside from the limited express warranty stated above.

NOTE: Warranty only applies for North American customers of purchases made in North America.

CONDITIONS OF WARRANTY

If during the 1 year warranty period your new product is found to be defective, TYPE S will repair

such defect, or replace the product, without charge for parts or labor subject to the following

conditions:

1. All repairs must be performed by TYPE S.

• Roll down your window so you will be able to hear what is happening outside your vehicle.

• Owners of SUVs, trucks, and vans need to take extra care to avoid hitting or running over a child.

• Teach children to move away from a vehicle whenever it is started.

Page is loading ...

Type S BT532629 User manual

Brand: Type S

Model: BT532629

Type: User manual

Download PDF

report

Type S BT532629 User manual

Type S BT532629 User manual

Related papers

Other documents