b)Setup menu
Press MENU button to enter MENU page.
Now the “Menu setting” is in blue background.
In the menu setting page, click left and right keys to select the required elds.
Click “OK” button to accept the settings.
Press the MENU key to exit the menu.
(i)System setting: Set system in framing preview mode.
Video mode: Double lens / front lens / back lens.
Time setting: Press left and right keys for time adjustment.
Press OK key to conrm and exit.
Formatting: Press the OK key to enter and select Yes/No.
Video format: NTSC/PAL setting.
Beep: On/Off.
Recording: On/O.
Language: English / German / French / Spanish / Italian / Portuguese /
Traditional Chinese / Simplied Chinese/ apanese.
Screen preset: On/O.
Automatic video protection sensitivity: Low / general / high /automatically turn o video protection
function (This function sets gravity sensor to start up automatic video recording sensitivity).
Frequency: 50HZ / 60HZ.
c)How to record
(i) Start / Stop recording:
In the recording mode, press OK key to start recording, then press OK key again
to stop recording. When the recorder is on or memory card is inserted, it will
automatically start recording.
LL /RFNLQJ)LOHV
In recording mode, press the right arrow key to lock a current recording. This will
prevent that le from being overwritten by the unit.
Follow the instructions under Section 4 - Computer access to the recorded le
Point 11(page 10), to unlock the file.
LLL$XGLR9ROXPH During the video recording process, press left key to mute
audio of the video.
G9LGHRSOD\EDFNDQG¿OHPDQDJHPHQW
Press MODE key to enter playback mode and now the screen shows playback
picture of the last video le.
L9LGHRSOD\EDFN
Video playback: Press left and right buttons to select audio and video les for play.
Press OK to play and pause the video le. 7.