2. Toro
  3. Replacement Blade Kit, TimeCutter Riding Mower
Replacement Blade Kit, TimeCutter Riding Mower

Toro Replacement Blade Kit, TimeCutter Riding Mower Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Replacement Blade Kit, TimeCutter Riding Mower Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3393-667RevA
ReplacementBladeKit
TimeCutter
®
RidingMowerwith42inMower
ModelNo.131-3939-03P
InstallationInstructions
WARNING
CALIFORNIA
Proposition65Warning
ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato
causecancer,birthdefects,orreproductiveharm.
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
Description
Qty.
Use
Nopartsrequired
–
Removetheblades.
Blades2Installtheblades.
RemovingtheBlades
Note:Ifyourbladeshaveabladestiffenerasshownin
Figure1,donotusethebladestiffenerwheninstallingthe
newblades.
1.Disengagetheblade-controlswitch(PTO).
2.Stoptheengine,waitforallmovingpartstostop,and
removethekeybeforeleavingtheoperatingposition.
3.Holdthebladeendusingaragorthickly-paddedglove.
Removethebladebolt,curvedwasher,bladestiffener
(certainmodelsonly),andbladefromthespindleshaft
(Figure1).
Figure1
1.Sailareaofblade
4.Bladebolt
2.Blade
5.Bladestiffener—discard
(certainmodelsonly)
3.Curvedwasher
©2014—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved
*3393-667*A
Retainthebladestiffenerforusewithbladesthatrequireit.
Thereplacementbladeswithinthiskithaveadifferentdesign
whichdonotrequirethestiffener(Figure2).
G015201
1
2
3
4
5
6
Figure2
1.Standardbladeonmodels
withbladestiffener
4.Newblade
2.Crosssectionofstandard
blade
5.Crosssectionofnewblade
3.Stiffenerrequired
6.Bendsincrosssection
providesinternalrigidity
InstallingtheBlades
1.Installthebladeontothespindleshaft(Figure3).
Important:Thesailarea(curvedpart)ofthe
blademustbepointingupwardtowardtheinside
ofthemowertoensurepropercutting.
g028369
1
2
3
4
Figure3
1.Sailareaofblade3.Curvedwasher
2.Blade4.Bladebolt
2.Installthecurvedwasher(cuppedsidetowardthe
blade)andthebladebolt(Figure3).
Note:Donotinstallabladestiffener.Theseblades
donotrequirethebladestiffenerbracket(Figure1).
3.Torquethebladeboltto47-88N-m(35-65ft-lb).
2
/