Toro 42in Twin Bagger, TimeCutter Z Riding Mowers User manual

Category
Lawnmowers
Type
User manual

This manual is also suitable for

FormNo.3354-177RevC
38inand42inTwinBagger
forTimeCutter
®
ZRidingMowers
ModelNo.79214—SerialNo.260000001andUp
ModelNo.79215—SerialNo.260000001andUp
Registeratwww.Toro.com.OriginalInstructions(EN)
Introduction
Readthisinformationcarefullytolearnhowtooperate
andmaintainyourproductproperlyandtoavoidinjury
andproductdamage.Youareresponsibleforoperating
theproductproperlyandsafely.
YoumaycontactTorodirectlyatwww.Toro.comfor
productandaccessoryinformation,helpndinga
dealer,ortoregisteryourproduct.
Wheneveryouneedservice,genuineToroparts,or
additionalinformation,contactanAuthorizedService
DealerorToroCustomerServiceandhavethemodel
andserialnumbersofyourproductready.Figure1
identiesthelocationofthemodelandserialnumbers
ontheproduct.Writethenumbersinthespace
provided.
Figure1
1.Modelandserialnumberlocation
ModelNo.
SerialNo.
Thismanualidentiespotentialhazardsandhas
safetymessagesidentiedbythesafetyalertsymbol
(Figure2),whichsignalsahazardthatmaycauseserious
injuryordeathifyoudonotfollowtherecommended
precautions.
Figure2
1.Safetyalertsymbol
Thismanualuses2otherwordstohighlightinformation.
Importantcallsattentiontospecialmechanical
informationandNoteemphasizesgeneralinformation
worthyofspecialattention.
Contents
Introduction.................................................................2
Safety...........................................................................3
SafetyandInstructionalDecals.............................3
Setup............................................................................4
1InstallingtheWeight..........................................4
2InstallingtheQuickAttachBracket....................5
3AssemblingtheBagger......................................5
4InstallingtheBaggerAssembly...........................5
5InstallingtheNewPivotRod..............................6
6InstallingtheRingBafesfor42inch
MowerOnly.....................................................7
7InstallingtheBladesfor42inchMower
Only.................................................................7
8InstallingtheChuteandDischarge
Tube.................................................................8
Operation.....................................................................9
EmptyingtheGrassBags......................................9
ClearingObstructionsfromtheBagger...............10
RemovingtheBagger.........................................10
OperatingTips...................................................11
Maintenance...............................................................13
RecommendedMaintenanceSchedule(s)................13
InspectingtheBaggerAttachment......................13
InspectingtheMowerBlades..............................13
CaringfortheGrassBags...................................14
CleaningtheBaggerAttachment.........................14
Storage.......................................................................14
StoringtheBaggerAttachment...........................14
©2008—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
2
Contactusatwww.Toro.com.
PrintedintheUSA.
AllRightsReserved
Safety
SafetyandInstructionalDecals
Safetydecalsandinstructionsareeasilyvisibletotheoperatorandarelocatednearanyareaof
potentialdanger.Replaceanydecalthatisdamagedorlost.
93-7320
1.Crushinghazardofhand—donotremovethewholebaggerfromthemachine;openthebaggertopandthenremovethebag(s)
fromthebagger.Donotremovethebaggertopwhenitisclosed;openthebaggertopandthenremoveit.
110-1868
1.Thrownobjecthazard,
mower—keepthe
deectorinplace.
3.Cutting/dismembermentof
handorfoot—stayaway
frommovingparts.
2.Thrownobject
hazard—Keepbystanders
asafedistancefrom
themachine;Donot
operatethewithoutgrass
collectionsysteminplace.
3
Setup
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
Weight1
Bolt(3/8x2-1/4inch)
2
Washer(3/8inch)
4
1
Locknuts(3/8inch)
2
Installtheweight.
BaggerQuickAttachBracket
1
Bolt(3/8x1inch)
4
Locknut(3/8inch)
4
2
Washer(3/8inch)
4
Installthequickattachbracket.
Bolt(1/4x3/4inch)
2
3
Locknut(1/4inch)
2
AssembletheBagger
Bagger1
4
GrassBag
2
Installthebaggerassembly.
Pivotrod1
5
Nut1
Installthenewpivotrod.
Ringbafe,front
2
Ringbafe,rear
2
Bolt,(1/4x5/8inch)
12
6
Locknut(1/4inch)
12
Installtheringbafes(42inchmower
only).
7
Blade2
Installtheblades(42inchmoweronly).
Chute
1
8
Dischargetube1
Installthechuteanddischargetube.
1
InstallingtheWeight
Partsneededforthisprocedure:
1Weight
2
Bolt(3/8x2-1/4inch)
4
Washer(3/8inch)
2
Locknuts(3/8inch)
Procedure
Thebaggeraddsalotofweighttotherear
ofthemachineandmaycauseanunstable
conditionwhichcouldresultinalossofcontrol.
Installthefrontweight.
1.Removethefootplatetoaccesstheexistingholesin
themachineframe(Figure3).
Figure3
1.Footrest3.Holepositions
2.Rod
2.Attachtheweighttothefrontofthemachineframe
withtwobolts(3/8x2-1/4inch),fourwashers
(3/8inch),andtwolocknuts(3/8inch)asshown
inFigure4.
4
Figure4
1.Footrestframe4.Washer(3/8inch)
2.Bolt(3/8x2-1/4inch)5.Nut(3/8inch)
3.Frontweight
3.Installthefootrestintothefootrestframewhile
placingtherodsinthesameholepositions
Important:Whenyouremovethetwinbagger,
remembertoremovethefrontweight.
2
InstallingtheQuickAttach
Bracket
Partsneededforthisprocedure:
1
BaggerQuickAttachBracket
4
Bolt(3/8x1inch)
4
Locknut(3/8inch)
4
Washer(3/8inch)
Procedure
1.Fromthebackofthemower,slidethequickattach
bracketalongtheoutsideoftherearframe.
2.Aligntheholesintherearframeandthebagger
mountingbracket(Figure5).
Figure5
1.Quickattachbracket4.Rearframe
2.Bolts(3/8x1inch)5.Washer(3/8inch)
3.Locknut(3/8inch)
3.Securethebaggermountingbrackettotherear
framewith4bolts(3/8x1inch),4washers(3/8
inch),and4locknuts(3/8inch)(Figure5).
3
AssemblingtheBagger
Partsneededforthisprocedure:
2
Bolt(1/4x3/4inch)
2
Locknut(1/4inch)
Procedure
Ifnecessary,installthebaggerframetothecover.Attach
theframeassemblytothebaggercoverwithtwobolts
(1/4x3/4inch)andtwolocknuts(1/4inch)(Figure6).
Figure6
1.Frameassembly
3.Bolt,1/4x3/4inch
2.Baggercover
4.Locknut(1/4inch)
5
4
InstallingtheBagger
Assembly
Partsneededforthisprocedure:
1Bagger
2
GrassBag
Procedure
1.Carefullyliftthebaggertopandslideitontothe
quickattachbracket(Figure7).Thebaggertopis
easiertoinstalliftwopeopleworktogether.
Figure7
1.Baggertop
2.Quickattachbracket
Ifyouremovethespring-loadedbaggertop
whenitisclosed(inthedownposition),thetop
maysuddenlyyopenandyouorsomeoneelse
maybebruised,pinched,orinjuredinanother
way.
Alwaysopen(raise)thebaggertopbeforeyou
removeorinstallitonthequick-attachbracket.
2.Installthebagsbyslidingthebagframehooksonto
theretainingbrackets(Figure8).
Figure8
1.Bagframehook
2.Retainingbracket
3.Lowerthebaggertopontothebags.Thenpush
downonbothbagretainerhandlesuntiltheylockon
thebagframe(Figure9).
Figure9
1.Baggertop2.Bagretainerhandles
5
InstallingtheNewPivotRod
Partsneededforthisprocedure:
1Pivotrod
1Nut
Procedure
1.Liftthegrassdeectorandremovethemulchplug,
ifpresent.
6
2.Removethenut,underthemower,holdingthepivot
rodandgrassdeectortothemower(Figure10).
Figure10
1.Grassdeector
3.Nut
2.Pivotrod
4.O-ring
3.Removethepivotrodandgrassdeectorfromthe
mower(Figure10)
4.Insertthenewpivotrodintotheshortstand-offon
thedeck.Securetherearendofrodintothemower
withanut(3/8inch)(Figure11).
Figure11
1.Mower
4.Stand-off
2.Pivotrod5.Rightsideblade
3.Nut
6
InstallingtheRingBafesfor
42inchMowerOnly
Partsneededforthisprocedure:
2
Ringbafe,front
2
Ringbafe,rear
12
Bolt,(1/4x5/8inch)
12
Locknut(1/4inch)
Procedure
1.Installtwofrontringbafestothemowerasshown
inFigure12.Use6bolts(1/4x5/8inch)and6
locknuts(1/4inch)tosecurethebafestothe
mower.
Figure12
1.42mowerdeck
4.Bolt,(1/4x5/8inch)
2.Frontringbafe5.Rearringbafe
3.Locknut(1/4inch)
2.Installthetworearringbafestothemoweras
showninFigure12.Use6bolts(1/4x5/8inch)
and6locknuts(1/4inch)tosecurethebafesto
themower.
3.Torqueallfastenersto90-110ft-lb(122-150Nm).
7
7
InstallingtheBladesfor42
inchMowerOnly
Partsneededforthisprocedure:
2Blade
Procedure
1.Holdthebladeusingaragorthickly-paddedglove
(Figure11andFigure13).
2.Removethebladebolt,curvedwasher,blade
stiffener,andbladefromthespindleshaft
(Figure13).
Figure13
1.Sailareaofblade
4.Bladebolt
2.Blade
5.Bladestiffener
3.Curvedwasher
3.Installthebladeontothespindleshaft(Figure13).
Important:Thecurvedpartofthebladeorsail,
mustbepointingupward,towardtheinsideof
themowertoensurepropercutting(Figure13).
4.Installthebladestiffener,thecurvedwasher(cupped
sidetowardtheblade),andthebladebolt(Figure13).
Torquethebladeboltto35-65ft-lb(47-88Nm).
5.Repeatthisprocedurefortheoppositeblade.
8
InstallingtheChuteand
DischargeTube
Partsneededforthisprocedure:
1
Chute
1Dischargetube
Procedure
1.Slidethechuteintopositionwiththerearhook
aroundthedeectorrodandthefrontlatchaligned.
Insertthelockingpin(Figure14).
Figure14
1.Chute4.Deectorrod
2.Lockingpin5.Flexiblelatch
3.Rearhook6.Notchedbracket
2.Hooktheexiblelatchonthechuteintothenotched
bracketonthebackofthemower(Figure14).
3.Slidethedischargetubeintotheopeninginthegrass
catcher(Figure15).
4.Slidethedischargetubeovertheendofthechute,
ensuringthatthetabonthechutesnapsintothe
squareholeinthedischargetube(Figure15).
8
Figure15
1.Dischargetube3.Tab
2.Chute
Operation
Note:Determinetheleftandrightsidesofthe
machinefromthenormaloperatingposition.
Toavoidpersonalinjury,followthese
procedures:
Becomefamiliarwithalloperatingand
safetyinstructionsinthe
Operator’ s Man ual
forthemowerbeforeusingthisattachment.
Neverremovethedischargetube,bags,
baggertop,orthechutewhiletheengineis
running.
Alwaysshuttheengineoffandwaitforall
movingpartstostopbeforeclearingan
obstructionfromthebaggingsystem.
Neverdomaintenanceorrepairswhilethe
engineisrunning.
EmptyingtheGrassBags
Becarefulwhenliftingorhandlingagrassbagthatis
full.Toemptythegrassbags:
1.Stopthemower,settheparkingbrake,and
disengagethepowertakeoff(PTO).Stopthe
engineandremovetheignitionkey.
2.Pulluponbothbagretainerhandlesuntilthey
unlockfromthebagframe(Figure16).Open(raise)
thebaggertop.
Figure16
1.Baggertop2.Bagretainerhandles
3.Compressdebrisintothebags.Withbothhands,
liftuponthebagandunhookitfromtheretaining
bracket.Emptythebag.Repeattheprocedurefor
theotherbag.
9
4.Installthebagsbyslidingthebagframehooksonto
theretainingbrackets(Figure17).
Figure17
1.Bagframehook
2.Retainingbracket
5.Lowerthebaggertopontothebags.Thenpush
downonbothbagretainerhandlesuntiltheylock
onthebagframe.
ClearingObstructionsfrom
theBagger
1.Stopthemower,shiftintoneutral,settheparking
brake,disengagethePTO,stoptheengine,and
removetheignitionkey.Waitforallmovingparts
tostop.
2.Checkthegrassbagsandemptythemiftheyarefull.
3.Removeandseparatethedischargetubeandchute
fromthebaggertopandmower.Usingastick
orsimilarobject,carefullyremoveandclearthe
obstructionfromthemower,dischargetube,chute,
andthebaggertop.
4.Afteryouremovetheobstruction,installthe
completebaggersystemandresumeoperation.
RemovingtheBagger
Anuncovereddischargeopeningcouldallow
thelawnmowertothrowobjectsintheoperator
orbystander’sdirectionandresultinserious
injury.Also,contactwiththebladecouldoccur.
Neveroperatethelawnmowerunlessyouinstall
acoverplate,amulchplate,oragrasschute
andcatcher.
1.Pushonthetabonthechuteandpullthedischarge
tubefreefromthechuteandgrasscatcher
(Figure15).
2.Releasetheexiblelatchandremovethelocking
pinsecuringthechutetothemower.Removethe
chutefromthemower(Figure14).
Ifyouremovethespring-loadedbaggertop
whenitisclosed(inthedownposition),thetop
maysuddenlyyopenandyouorsomeoneelse
maybebruised,pinched,orinjuredinanother
way.
Alwaysopen(raise)thebaggertopbeforeyou
removeorinstallitonthequick-attachbracket.
3.Raisethebaggertopandremovethegrassbags
fromthebagframe(Figure18).
Figure18
1.Baggertop2.Bagretainerhandles
4.Carefullyliftthebaggertopandslideitoffthequick
attachbracket(Figure19).Thebaggertopiseasier
toremoveiftwopeopleworktogether.
10
Figure19
1.Baggertop
2.Quickattachbracket
5.Storeallbaggerpartsinaconvenientplace.
ReplacingtheGrassDeector
Anuncovereddischargeopeningcouldallow
thelawnmowertothrowobjectsintheoperator
orbystander’sdirectionandresultinserious
injury.Also,contactwiththebladecouldoccur.
Neveroperatethelawnmowerunlessyouinstall
acoverplate,amulchplate,oragrasschute
andcatcher.
1.Locatethegrassdeectorandhardwarein
Figure20.
2.Inserttherodatthefrontofgrassdeectorintothe
shortstand-offonthedeck.Securetherearpart
oftherodintothemowerwithanut(3/8inch)
(Figure20).
Important:Thegrassdeectormustbespring
loadedinthedownposition.Liftthedeector
uptotestthatitsnapstothefulldownposition.
Figure20
1.Grassdeector
3.Nut
2.Pivotrod
4.O-ring
OperatingTips
TipsforBagging
Size
Rememberthatthemowerislongerandwiderwiththis
attachmentinstalled.Byturningtoosharplyinconned
placesyoumaydamagetheattachment.
Trimming
Alwaystrimwiththeleftsideofthemower.Donot
trimwiththerightsideofthemowerbecauseyoucould
damagethebagger’schuteanddischargetube.
CuttingHeight
Donotsetthemowercuttingheighttoolowbecause
longgrasssurroundingthemowercanpreventairfrom
gettingunderthemowerandenteringthebagging
system.Ifenoughairdoesntgetunderthemower,the
baggingsystemwillplug.
CuttingFrequency
Cutthegrassoften,especiallywhenitgrowsrapidly.
Youwillhavetocutyourgrasstwiceifitgetsexcessively
long.
CuttingTechnique
Forbestlawnappearance,besuretoslightlyoverlap
themowerintothepreviouslycutarea.Thishelps
reducetheloadontheengineandreducesthechance
ofpluggingthechuteanddischargetube.
BaggingSpeed
Mostoftenyouwillbagwiththemowerthrottlein
theFastpositionanddriveatanormalgroundspeed.
11
However,inextremelydryanddustygrass,youmay
wanttoslightlyreducethethrottlespeedandincrease
thegroundspeedofthemower.Thebaggingsystem
mayplugifyoudrivetoofastandtheenginespeed
getstooslow .Onhillsitmaybenecessarytoslowthe
mowergroundspeed.Thishelpsmaintaintheengine
speedandbaggingefciency.Mowdownhillwhenever
possible.
Asthebaggerlls,extraweightisaddedto
thebackofthemachine.Ifyoustopandstart
suddenlyonhills,youmaylosesteeringcontrol
orthemachinemaytip.
Donotstartorstopsuddenlywhengoing
uphillordownhill.Avoiduphillstarts.
Ifyoudostopthemachinewhengoing
uphill,disengagethePTO.Thenbackdown
thehillusingaslowspeed.
Donotchangespeedsorstoponslopes.
BaggingLongGrass
BaggingLongGrassExcessivelylonggrassisheavyand
maynotbepropelledcompletelyintothegrassbags.If
thishappens,thedischargetubeandchutemayplug.
Toavoidpluggingthebaggingsystem,mowthegrass
atahighheightofcut,thenlowerthemowertoyour
normalcuttingheightandrepeatthebaggingprocess.
BaggingWetGrass
Alwaystrytocutgrasswhenitisdrybecauseyour
lawnwillhaveaneatappearance.Ifyoumustcutwet
grass,usetheconventionalsidedischargefeatureofthe
mower.Severalhourslater,whentheclippingsaredry,
installthecompletebaggerattachmentandvacuumup
thegrassclippings.
SignsofPlugging
Asyouarebagging,asmallamountofgrassclippings
normallyblowoutthefrontofthemower.Anexcessive
amountofclippingsblowingoutindicatesthatthebags
arefullorthesystemisplugged.
12
Maintenance
Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.
RecommendedMaintenanceSchedule(s)
MaintenanceService
Interval
MaintenanceProcedure
Aftertherst10hours
Inspectthebagger
Beforeeachuseordaily
Cleanthebagger
Beforestorage
Inspectthebagger
Cleanthebagger
Ifyouleavethekeyintheignitionswitch,someonecouldaccidentlystarttheengineandseriously
injureyouorotherbystanders.
Removethekeyfromtheignitionanddisconnectthewirefromthesparkplugbeforeyoudoany
maintenance.Setthewireasidesothatitdoesnotaccidentallycontactthesparkplug.
Debrisbuiltupintheenginecompartment,ifnotremoved,couldbeignitedbyahotengine.Arein
theenginecompartmentcouldcanburnyouandothersandcandamageproperty.
Beforeusingandwhiletheengineiscool,checkfordebrisintheenginecompartment.
Keepthemachinefreeofgrass,leaves,orotherdebrisbuild-up.
Cleanupoilorfuelspillageandfuelsoakeddebris.
Allowthemachinetocoolbeforestoring.
InspectingtheBagger
Attachment
ServiceInterval:Aftertherst10hours
Beforestorage
Inspectthebaggerattachmentaftertherst10hoursof
operation,andmonthlythereafter.
1.Checkthechute,dischargetube,andthebaggertop.
Replacethesepartsiftheyarecrackedorbroken.
2.Tightenallnuts,bolts,andscrews.
3.Inspectthegrassbagsfordeterioration.
Youorbystanderscouldbeseverelyinjuredby
yingdebrisorthrownobjectsthatmaypass
throughtorn,worn,ordeterioratedgrassbags.
Frequentlycheckthegrassbagsforholes,
rips,wear,andotherdeterioration.
Donotwashthegrassbags.
Ifthebaghasdeteriorated,installnewgrass
bagssuppliedbythemanufacturerofthis
baggerattachment.
InspectingtheMowerBlades
Inspectthemowerbladesregularlyandwhenevera
bladestrikesaforeignobject.
13
Ifthebladesarebadlywornordamaged,installnew
blades.RefertoyourmowerormowerOperator’sManual
forcompleteblademaintenance.
CaringfortheGrassBags
Washingthegrassbagsisnotrecommended.
Topreventrapiddeteriorationofthebagmaterial,store
thebagswheretheywilldrycompletelyaftereachuse.
CleaningtheBagger
Attachment
ServiceInterval:Beforeeachuseordaily
Beforestorage
1.Aftereachuse,removeandwashtheinsideand
outsideofthebaggertop,dischargetube,chute,and
theundersideofthemower,usingwatersprayed
fromagardenhose.Useamildautomotivedetergent
toremovestubborndirt.
2.Makesureyouremovemattedgrassfromallparts.
3.Afterwashing,letallofthepartsdrythoroughly.Do
notwashthegrassbags.
Storage
StoringtheBaggerAttachment
1.Cleanthebaggerattachment;refertoCleaningthe
BaggerAttachment.
2.Inspectthebaggerattachmentfordamage;referto
InspectingtheBaggerAttachment.
3.Makesurethegrassbagsareemptyandthoroughly
dry.
4.Storethebaggerinaclean,dryplace,outofdirect
sunlight.Thisprotectstheplasticpartsandextends
thelifeofthebagger.Ifyoumuststorethebagger
outside,coveritwithaweatherproofcover.
14
Notes:
15
Consumer
TimeCutter
The Toro Total Coverage Guarantee
A Two-Year Full Warranty (Limited Warranty for Commercial Use)
Conditions and Products Covered
The Toro Company and its afliate, Toro Warranty Company,
pursuant to an agreement between them, jointly promise to
repair any Toro Product used for normal residential purposes*
if defective in materials or workmanship. The following time
periods apply from the date of purchase:
Products Warranty Period
All TimeCutter Mowers and
Attachments
2 year full warranty
All Batteries 1 year full warranty
This warranty covers both the cost of parts and labor, and
transportation within a fteen mile radius of the servicing dealer.
This warranty applies to all consumer TimeCutter Mowers and
their attachments.
N o r m a l r e s i d e n t i a l p u r p o s e s m e a n s u s e o f t h e p r o d u c t o n t h e s a m e l o t a s y o u r h o m e . U s e
a t m o r e t h a n o n e l o c a t i o n i s c o n s i d e r e d c o m m e r c i a l u s e , a n d t h e c o m m e r c i a l u s e w a r r a n t y
w o u l d a p p l y .
Limited Warranty for Commercial Use
Toro Consumer Products and attachments used for commercial,
institutional, or rental use are warranted against defects in
materials or workmanship for the following time periods from the
date of purchase:
Products Warranty Period
Air Cooled Gas Engines 90 day limited warranty
All other items 30 day limited warranty
Instructions for Obtaining Warranty Service
If you think that your Toro Product contains a defect in materials
or workmanship, follow this procedure:
1. Contact any Toro Authorized or Master Service Dealer
to arrange service at their dealership. To locate a dealer
convenient to you, refer to the Yellow Pages of your
telephone directory (look under “Lawn Mowers") or access
our website at www.Toro.com. U.S. Customers may also
call toll free: 866-854-9035 to use our 24-hour Toro dealer
locator system.
2. Bring the product and your proof of purchase (sales receipt)
to the Service Dealer.
If for any reason you are dissatised with the Service Dealer’s
analysis or with the assistance provided, contact us at:
Customer Care Department, Consumer Division
Toro Warranty Company
8111 Lyndale Avenue South
Bloomington, MN 55420-1196
Toll Free: 866-216-6029 (U.S. customers)
Toll Free: 866-216-6030 (Canada customers)
Owner Responsibilities
You must maintain your Toro Product by following the
maintenance procedures described in the operator’s manual.
Such routine maintenance, whether performed by a dealer or by
you, is at your expense.
Items and Conditions Not Covered
There is no other express warranty except for special emission
system coverage on some products. This express warranty does
not cover:
Cost of regular maintenance service or parts, such as lters,
fuel, lubricants, tune-up parts, blade sharpening, brake and
clutch adjustments.
Any product or part which has been altered or misused
or required replacement or repair due to normal wear,
accidents, or lack of proper maintenance.
Repairs necessary due to improper fuel, contaminants in the
fuel system, or failure to properly prepare the fuel system
prior to any period of non-use over three months.
Pickup and delivery charges for distances beyond a fteen
mile radius from an Authorized Toro Service Dealer.
All repairs covered by this warranty must be performed by an
Authorized Toro Service Dealer using Toro approved replacement
parts.
General Conditions
Repair by an Authorized Toro Service Dealer is your sole remedy
under this warranty.
Neither The Toro® Company nor Toro Warranty Company is liable
for indirect, incidental or consequential damages in connection
with the use of the Toro Products covered by this warranty,
including any cost or expense of providing substitute equipment
or service during reasonable periods of malfunction or non-use
pending completion of repairs under this warranty.
Some states do not allow exclusions of incidental or consequential
damages, or limitations on how long an implied warranty lasts,
so the above exclusions and limitations may not apply to you.
This warranty gives you specic legal rights, and you may also
have other rights which vary from state to state.
Countries Other than the United States or Canada
Customers who have purchased Toro products exported from the United States or Canada should contact their Toro Distributor
(Dealer) to obtain guarantee policies for your country, province, or state. If for any reason you are dissatised with your Distributor’s
service or have difculty obtaining guarantee information, contact the Toro importer. If all other remedies fail, you may contact us
at Toro Warranty Company.
374-0061 Rev A
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Toro 42in Twin Bagger, TimeCutter Z Riding Mowers User manual

Category
Lawnmowers
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI