Humble Crew TC307 Owner's manual

Type
Owner's manual
K) 40 Flat
Washers
L) 40 Split
Washers
Note: Place the split
washer (L) against the
head of the machine
screw (G) and then add
the at washer (K) before
screwing the leg on
Note: Place the split
washer (L) against the
head of the machine
screw (G) and then add
the at washer (K) before
screwing the leg on
Note: Place the split
washer (L) against the
head of the machine
screw (G) and then add
the at washer (K) before
screwing the leg on
Tot Tutors, Inc.
www.tottutors.com
561 . 995 . 8940
email : info@tottutors.com
6600 West Rogers Circle . Suite 13
Boca Raton . Florida . 33487
TC714 (pastel) / TC715 (primary) / TC824 (espresso)
Wood Table & 4 Chairs
FEB14HY
Made in China
Recommended for ages 3 - 8 years
This model is in compliance with ASTM toy safety standard F963 & CPSIA 2008
Cleaning
Use only household soap
or mild detergent and
warm water. Wipe with
damp cloth.
Periodically check
for loose screws to
avoid accidental injury.
Please read instructions completely before assembling. Assemble on a soft, smooth area. Adult assembly required.
! WARNING: CHOKING HAZARD – Small parts NOT for children under 3 years.
A) 1 Table Top
B) 4 Table Legs
C) 4 Chair Seats
D) 8 Back Chair Legs
E) 4 Chair Back Panels
F) 8 Front Chair Legs
G) 40 Machine
Screws
H) 8 Wood
Screws
I) 1 Allen
Wrench
1
Assemble chair seat (C) to 2 front legs (F).
Use machine screws (G), split washers (L)
and at washers (K) to fasten, tighten with
wrench (I)
2
Assemble chair back panel (E) to 2 back chair
legs (D). Use wood screws (H) to fasten,
tighten with screw driver (I).
3
Assemble chair back to chair
seat (C). Use machine screws
(G), split washers (L) and at
washers (K) to fasten, tighten
with wrench (I).
4
Assemble 4 table legs (B) into table top (A).
Use 2 machine screws (G), split washers (L)
and at washers (K) for each leg,
tighten with wrench (I).
  • Page 1 1

Humble Crew TC307 Owner's manual

Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI