TP-LINK TL-WN722N User manual

Type
User manual
a. Download the driver and utility from this
product’s Support page at
www.tp-link.com.
Note:
If your computer has a CD drive, you can also run the
included CD to install the driver and utility.
b. Unzip the downloaded folder and run the
Install.pkg.
c. Follow the instructions to complete the
installation.
For Mac OS X
Uninstall.commandInstall.pkg
SHELL
Option 1: Via TP-Link Utility Option 2: Via Wi-Fi Protected Setup (WPS)
a. Click (TP-Link Utility) on the menu
bar.
b. Select your Wi-Fi network and enter the
Wi-Fi password when prompted.
a. Press the WPS button on your router.
b. Within 2 minutes, press and hold the WPS
button on the adapter until the WPS
progress window appears.
c. When the "WPS Protocol Finished!!"
message appears, click OK.
150Mbps High Gain Wireless
USB Adapter
MODEL NO. TL-WN722N
Quick Installation Guide
1 Connect to a Computer 2 Install Driver and Utility 3 Join a Wireless Network
Fri 5:14 PM
TP-Link_0903
TP-Link_
0210
TP-Link_0001
TP-Link_XXXX
Join Other Network...
WPS...
Open Wireless Utility...
USB-WiFi: On
Turn USB-WiFi Off
Option 1: Directly Option 2: Via the USB Extension Cable
WPS Progress Scan Active WPS AP
PIN PBC Cancel
WPS
Connections are available
Wireless Network Connection
Connect automatically
Connect
TP-Link_XXXX
c. When the "Success!" message appears, your
computer is connected to Wi-Fi.
For Windows
Option 1: Via Windows Wireless Utility
a. Click the network icon ( or ) on the
taskbar.
b. Select your Wi-Fi network, click Connect
and enter the password when prompted.
Option 2: Via WPS Tool
a. Press the WPS button on your router.
b. Within 2 minutes, press and hold the WPS
button on the adapter until WPS Tool opens.
7106507485 REV8.1.0
1 Connect to a Computer
3 Join a Wireless Network
2 Install Driver and WPS Tool
This USB Adapter can only be powered by computers that comply with
Limited Power Source (LPS).
For detailed instructions, please refer to the
User Manual from this product’s Support
page at www.tp-link.com.
For technical support and other information,
please visit http://www.tp-link.com/support,
or simply scan the QR code.
©2017 TP-Link
Option 1: Directly Option 2: Via the USB Extension Cable
Note:
In Windows XP, a Found New Hardware Wizard window will appear when the adapter is detected. Please click Cancel.
a. Insert the CD and run the Autorun.exe.
Note:
You can also download the driver from this product’s
Support page at www.tp-link.com.
b. Select TL-WN722N and follow the
steps to install the driver and WPS Tool.
Note:
If you can’t install the driver successfully, disable the
antivirus software and firewall, then try again.
TL-WN722N
WPS
Cancel
WPS
Cancel
  • Page 1 1
  • Page 2 2

TP-LINK TL-WN722N User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI