Feiss P1489OCG Operating instructions

Feiss
Brand
Feiss
Model
P1489OCG
Type
Operating instructions

Feiss P1489OCG: This pendant light is safety-listed for damp locations and is compatible with incandescent or LED lamps. It can be dimmed using a standard incandescent dimmer or a LED dimmer, respectively. The fixture should be installed by a qualified electrician in accordance with the National Electrical Code (NEC). The light comes with a chain link for hanging, but a hang straight or swivel can be substituted for use with vaulted ceilings. Refer to the label on the lamp socket for maximum wattage information.

Feiss P1489OCG: This pendant light is safety-listed for damp locations and is compatible with incandescent or LED lamps. It can be dimmed using a standard incandescent dimmer or a LED dimmer, respectively. The fixture should be installed by a qualified electrician in accordance with the National Electrical Code (NEC). The light comes with a chain link for hanging, but a hang straight or swivel can be substituted for use with vaulted ceilings. Refer to the label on the lamp socket for maximum wattage information.

1
Installation Instructions for
Fiona Pendant
1.0
P1487-P1489
Pendant
P1487, P1489
1
2
1A
Follow enclosed supplement installation instructions for electrical and fixture installation onto house junction box.
NOTE: The hang straight or swivel may be substituted for the chain link for use with vaulted ceilings.
Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information.
CAUTION RISK OF FIRE-
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing compliant junctionNEC
boxes.
This product is safety listed for damp locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED LEDlamps may be dimmed with a dimmer. Consult lamp manufacturer for
additional information.
This instruction shows a typical installation.
STEM ASSEMBLY
FIXTURE
2
LAMP
HANG STRAIGHT
CHAIN LINK
1A
2
MISE EN GARDE RISQUE INCENDIE-D'
Ce produit doit être installé selon le code d’installation pertinent ,
par une personne qui connaÎt bien le produit et
son fonctionnement ainsi que les risques inhérents
Les fils d’alimentation doivent convenir pour 90°c.
ENSEMBLE DE TIGE
AMPOULE
LUMINAIRE
ACCROCHER DROITE
MAILLON DE CHAÎNE
1
2
Suivez les instructions d'installation complétées pour l'installation électrique et de montage sur la boîte de jonction domestique.
REMARQUE: le accrocher droite ou pivot peut être remplacé par le maillon de la chaîne à utiliser avec des plafonds voûtés.
Vissez la ampoule dans la douille. Reportez-vous à l'étiquette sur la douille de la lampe pour obtenir des informations sur Max Wattage.
2
1A
3
ADVERTENCIA RIESGO DE INCENDIO-
Este productor debe ser instalado segun el codigo de
instalacion aplicable por una persona que conozca la
constussion y el funcionamiento del producto y los riesgos
que supone.
Conductores de alimentacion 90°c Min.
ENSAMBLAJE DE TALLO
BOMBILLA
L MPARAÁ
SUSPENSIÓN RECTA
ESABLÓN DE CADENA
1
2
Siga las instrucciones adjuntas de instalación del suplemento para la instalación eléctrica y de accesorios en la caja de empalmes de la
casa. La suspensión recta o pivote puede sustituir al eslabón de cadena para usar con techos abovedados.NOTA:
Enrosque la bombilla en el enchufe. Consulte la etiqueta en el conector de la lámpara para obtener información sobre la potencia
máxima.
2
4
7400 Linder Ave, Skokie, 160077IL
800.969.3347
www.Feiss.com
© 2018 Feiss.All rights reserved.The "Feiss" graphic is a
registered trademark of Feiss. Feiss reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
SAVE THESE INSTRUCTIONS!
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Feiss P1489OCG Operating instructions

Feiss
Brand
Feiss
Model
P1489OCG
Type
Operating instructions

Feiss P1489OCG: This pendant light is safety-listed for damp locations and is compatible with incandescent or LED lamps. It can be dimmed using a standard incandescent dimmer or a LED dimmer, respectively. The fixture should be installed by a qualified electrician in accordance with the National Electrical Code (NEC). The light comes with a chain link for hanging, but a hang straight or swivel can be substituted for use with vaulted ceilings. Refer to the label on the lamp socket for maximum wattage information.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents