Page is loading ...
1
Installation Instructions for
Install the fixture arms to the swivels on the hub and fixture ring by screwing them together.
Follow enclosed supplement installation instructions for electrical and fixture installation onto junction box.
NOTE: The hang straight may be substituted for the chain link for use with vaulted ceilings.
Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information.
Install the Shade:
A) Loosen knurled knob underneath shade base.
B) Insert shade lip between bracket and shade base, then push shade base against glass shade gently.
C) Secure the shade by tightening the knurled knob.
1
2
1A
Harper Pendant
1.0
P1477
P1477
3
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing NEC compliant junction
boxes.
This product is safety listed for damp locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED LEDlamps may be dimmed with a dimmer. Consult lamp manufacturer for
additional information.
Pendant
CAUTION RISK OF FIRE-
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
2
HUB
LAMP
SWIVEL
KNURLED KNOB
SHADE
1
4
FIXTURE ARM
SHADE BASE
FIXTURE RING
4
3
1
11
KNURLED KNOB
BRACKET
4A
4B
SHADE BASE
4C
4
SAVETHESE INSTRUCTIONS!
7400 Linder Ave, Skokie, 60077IL
800.323.3226 - 847.626.6300
www.Feiss.com
© 2017 Feiss.All rights reserved.The "Feiss" graphic is a
registered trademark of Feiss. Feiss reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
/
