Generation Lighting F3208 Installation guide

F3208
Brand
Generation Lighting
Model
F3208
Type
Installation guide
1
Installation Instructions for
Boughton Chandelier
1.0
F3205-6-F3206-10-F3207-18-F3208-24
Chandelier
F3205/6, F3206/10, F3207/18, F3208/24
1
2
1A
3
CAUTION RISK OF FIRE-
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
4
4
Install the candle tubes by sliding them over the sockets.
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
Feed the cord through the decorative washer and fixture loop, then screw the fixture loop onto the fixture.
Follow enclosed supplement installation instructions for electrical and fixture installation onto house junction box.
GENERAL PRODUCT INFORMATION:
These fixtures are intended to be installed utilizing compliantNEC
junction boxes.
This product is safety listed for damp locations.
Incandescent version may be dimmed with a standard incandescent
dimmer. version may be dimmed with a dimmer. ConsultLED LED
lamp manufacturer for additional information.
This instruction shows a typical installation.
LAMP
CHAIN
FIXTURE LOOP
CANDLE TUBE
DECORATIVE WASHER
SOCKET
3
2
1
Page is loading ...
Page is loading ...
4
7400 Linder Ave, Skokie, 160077IL
800.969.3347
www.Feiss.com
© 2018 Feiss.All rights reserved.The "Feiss" graphic is a
registered trademark of Feiss. Feiss reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
SAVETHESE INSTRUCTIONS!
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Generation Lighting F3208 Installation guide

F3208
Brand
Generation Lighting
Model
F3208
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents