2. Feiss
  3. F2813/3PN

Feiss F2813/3PN Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Feiss F2813/3PN Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What should users do before installing the Feiss F2813/3PN chandelier?
    Where should the chandelier be installed?
    Who should install the chandelier?
    What type of dimmer can be used?
    What size supply conductors should be used?
    What type of junction boxes should be used?
    How many light bulbs does the chandelier take?
    What is the maximum wattage for each light bulb?
1
Installation Instructions for
Malia 3 Light Chandelier
1.1
F2813-3
Chandelier
F2813-3
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
Install the bobeche by slipping through the socket until it securely sits on the fitter.
Install the candle tube by slipping through the socket.
Install the candle follower on top of the candle tube.
Install the lamp by screwing it into the socket. Refer to the label on the lamp socket for Max Wattage information.
Install the stem and spacer onto the socket assembly by screwing them to the threaded nipple.
Install and secure the string of beads by hooking them to the top and bottom of the fixture as shown on drawing.
Install the font by hooking the support chain to the bottom of the fixture and to the font, then hook the lower string of beads to the font and
hang the jewel.
Install the fixture to the chain by placing the fixture top over the fixture loop, then opening the bottom chain link and securing it to the fixture
loop by closing the link.
BOTTOM
TOP
1A
7
1
3
7
7
2
9
6
BOBECHE
4
LAMP
FIXTURE
CHAIN LINK
STEM
FIXTURE LOOP
FIXTURE TOP
FONT
SUPPORT CHAIN
STRING OF BEADS
STRING OF BEADS
JEWEL
1
2
3
4
5
6
7
8
9
CANDLE FOLLOWER
CANDLE TUBE
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing NEC compliant
junction boxes.
This product is safety listed for dry locations only.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
5
Page is loading ...
Page is loading ...
SAVETHESE INSTRUCTIONS!
4
7400 Linder Ave, Skokie, IL 60077
800.969.3347
www.Feiss.com
© 2015 Feiss.All rights reserved.The "Feiss" graphic is a
registered trademark of Feiss. Feiss reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
/