Konica Minolta BIZHUB PRO 1050E Owner's manual

Operator Manual

• Copier

• POD Administrator

• Security

Operator Manual

• C opier

• P OD Adminis trator

• S ec urity

1050/1050e

.

bizhub PRO 1050/1050e x-1

Table of Contents

1 Safety Information

1.1 Safety Information ............................................................................ 1-3

1.1.1 Warning and Precaution Symbols .................................................. 1-3

1.1.2 Meaning of Symbols ...................................................................... 1-3

1.2 Regulation Notices ......................................................................... 1-10

1.2.1 Laser Safety ................................................................................. 1-10

1.2.2 Ozone Release ............................................................................. 1-12

1.2.3 Electromagnetic Interference ....................................................... 1-12

1.2.4 For European Users ..................................................................... 1-12

1.2.5 For German Users ........................................................................ 1-12

1.3 Caution Labels and Indicators ...................................................... 1-13

1.4 Installation Space ........................................................................... 1-15

2 Preparation for Use

2.1 Machine Configuration ..................................................................... 2-3

2.1.1 External Machine Items .................................................................. 2-3

2.1.2 Internal Machine Items ................................................................... 2-5

2.1.3 Control Panel Layout ..................................................................... 2-6

2.1.4 Folding Unit FD-501 ....................................................................... 2-8

2.1.5 Large Capacity Stacker LS-501/LS-502 ...................................... 2-11

2.1.6 Saddle Stitcher SD-501 ............................................................... 2-13

2.1.7 Perfect Binder PB-501 ................................................................. 2-16

2.1.8 Finisher FS-503 ............................................................................ 2-19

2.1.9 Standard/Optional Equipment ..................................................... 2-20

2.2 Turning On/Off the Power Switch ................................................. 2-23

2.2.1 To Turn On the Power .................................................................. 2-23

2.2.2 To Turn Off the Power .................................................................. 2-25

x-2 bizhub PRO 1050/1050e

2.3 To Use Machine When Power Save LED Lights ...........................2-26

2.3.1 Auto Low Power ...........................................................................2-27

2.3.2 Auto Shut-Off ................................................................................2-27

2.3.3 Using Power Save Manually .........................................................2-28

2.3.4 When Weekly Timer Is Activated ..................................................2-30

2.4 Making User Authentication ...........................................................2-33

3 Paper and Original Information

3.1 Paper Information ..............................................................................3-3

3.1.1 Paper Weight ..................................................................................3-3

3.1.2 Tray/ Exit Tray Capacity ..................................................................3-5

3.1.3 Paper Size .......................................................................................3-8

3.1.4 To Store Copy Paper ......................................................................3-9

3.2 Original Information ........................................................................3-10

3.2.1 Using Original Glass .....................................................................3-10

3.2.2 ADF Originals ................................................................................3-12

4 Supplies & Handling

4.1 Loading Paper ....................................................................................4-3

4.1.1 Loading Paper in Main Body Trays and Paper Feeder Unit Trays ..4-4

4.1.2 Loading Cover Paper in Cover Feeding Tray of

Perfect Binder PB-501 ....................................................................4-8

4.1.3 Loading Tabbed Sheets in Tray ....................................................4-11

4.2 Adding Toner ...................................................................................4-14

4.3 Inserting a New Staple Cartridge into Finisher FS-503 ................4-17

4.4 Inserting a New Staple Cartridge into Saddle Stitcher SD-501 ..4-20

4.5 Adding Paste Pellets to Perfect Binder PB-501 ............................4-22

4.6 Empty Trash Basket of Folding Unit FD-501 .................................4-25

4.7 Empty Dust Box of Saddle Stitcher SD-501 ..................................4-27

4.8 Empty Dust Box of Perfect Binder PB-501 ....................................4-29

4.9 Removing Finished Sets from Large Capacity Stacker

LS-501/502 .......................................................................................4-31

bizhub PRO 1050/1050e x-3

5 Before Making Copies

5.1 Copy Screen ...................................................................................... 5-3

5.1.1 Machine Status Screen .................................................................. 5-5

5.2 Features of the bizhub PRO 1050/1050e ........................................ 5-7

5.3 How to Make a Basic Copy ............................................................ 5-12

5.4 Positioning Originals ...................................................................... 5-16

5.4.1 Positioning Originals in ADF ......................................................... 5-16

5.4.2 Positioning Original on Original Glass .......................................... 5-19

5.5 Setting Print Quantity ..................................................................... 5-20

5.5.1 To Set Print Quantity .................................................................... 5-20

5.5.2 To Change Print Quantity ............................................................. 5-21

5.6 Setting Job During Warm-up ......................................................... 5-22

5.7 To Stop Scanning/Printing ............................................................. 5-25

6 Basic Job Settings

6.1 Copy Conditions Incompatible with Basic Settings ...................... 6-3

6.2 Function Key ..................................................................................... 6-8

6.3 Original Setting ............................................................................... 6-10

6.3.1 Specifying Original Direction ........................................................ 6-10

6.3.2 Selecting Binding Direction of Originals ...................................... 6-12

6.3.3 Copying Mixed Size Originals (Mixed Original) ............................ 6-14

6.3.4 Copying Z-Folded Originals (Z-Folded) ....................................... 6-16

6.3.5 Feeding Single Original from ADF (Single Feed) .......................... 6-18

6.3.6 Copying Non-Standard Size Originals

(Custom Size / Tab Paper) ........................................................... 6-21

6.4 Memory Scan Mode ....................................................................... 6-24

6.5 Special Image .................................................................................. 6-26

6.5.1 Selecting Exposure Level and Adjusting Background Whiteness 6-26

6.5.2 Making Copy Quality Closer to Originals (Text/Photo Enhance) . 6-30

6.6 Zoom ................................................................................................ 6-32

6.6.1 To Copy in 1.000 Magnification Mode ......................................... 6-32

6.6.2 To Change Magnification Ratio .................................................... 6-33

6.7 Copy Mode ...................................................................................... 6-37

6.7.1 Making Double-Sided Copies Using ADF .................................... 6-37

x-4 bizhub PRO 1050/1050e

6.8 Making Double-Sided Copies Using Original Glass .....................6-40

6.8.1 Making Single-Sided Copies from Double-Sided Originals ..........6-44

6.9 Paper Tray Setting ...........................................................................6-46

6.9.1 To Select Paper Size Automatically (APS) ....................................6-47

6.9.2 To Specify Desired Paper Size (AMS) ...........................................6-49

6.9.3 Rotation ........................................................................................6-51

6.9.4 Using Paper Not Specified for Any Tray (Paper Presetting) .........6-53

6.10 Reserve Job Setting ........................................................................6-64

7 Job Management

7.1 Overview of Job List Screen .............................................................7-3

7.2 Job Operation on Job List Screen ...................................................7-4

7.2.1 To Check/Control Reserved Jobs ..................................................7-4

7.2.2 To Display Output History ...............................................................7-6

7.2.3 To Display Send History .................................................................7-7

7.2.4 To Check Incomplete Jobs .............................................................7-8

7.2.5 To Check/Operate Suspended Jobs ..............................................7-9

7.2.6 To Check/Control Spool Jobs ......................................................7-11

8 Applications

8.1 Copy Conditions Incompatible with Applications ..........................8-3

8.2 To Use Application Function ............................................................8-8

8.3 Inserting Sheets and Covers (Sheet Insertion) .............................8-10

8.4 Locating Title Pages on the Right Side (Chapter) ........................8-17

8.5 Lay Out Several Pages onto One Sheet (Combination) ...............8-20

8.6 Making a Multiple Page Signature Booklet (Booklet) ..................8-23

8.7 Copying onto Transparent Films (OHP Interleave) .......................8-26

8.8 Inserting Images into Printed Sets (Image Insert) ........................8-29

8.9 Dividing an Image into Right and Left Pages (Book Copy) .........8-33

8.10 Programming Different Settings for an Output Job

(Program Job) ..................................................................................8-39

8.11 Erasing Outside of the Original (No Image Area Erase) ...............8-42

8.12 Reversing Colour in Black and White Image

(Neg. Pos. Reverse) .........................................................................8-45

8.13 Repeating Selected Image Area (Repeat: Vert./Horiz. Mode) .....8-47

bizhub PRO 1050/1050e x-5

8.14 Repeat Automatically or Select Repeat Times

(Repeat: Auto Detect/ Repeat Mode) ............................................ 8-50

8.15 Eliminating Black Copy Marks Along Borders

(Frame/Fold Erase) ......................................................................... 8-54

8.16 Copying Image in the Centre of Copy Paper

(Image Centering) ........................................................................... 8-58

8.17 Printing Images Fully to the Edges (All-Image Area) ................... 8-60

8.18 Adjusting Position of Copy Image (Image Shift) .......................... 8-61

8.19 Reducing Images to Create Binding Margin (Reduce&Shift) ..... 8-66

8.20 Printing Stamp, Page, Date/Time onto Copies (Stamp) .............. 8-69

8.21 Printing Watermark onto Copies (Stamp) .................................... 8-78

8.22 Print Words, Date/Time, Annotation Number onto Copies

(Annotation) ..................................................................................... 8-81

8.23 Overlay an Image onto Each Page Copied in the Job (Overlay) . 8-86

8.24 Store Image in HDD / Overlay Stored Image

(Overlay Memory) ............................................................................ 8-89

9 Setting Output Methods

9.1 Copy Conditions Incompatible with Output Modes ...................... 9-3

9.2 Selecting an Output Tray ................................................................. 9-8

9.3 Setting Binding Direction for Duplex Copies ............................... 9-13

9.4 Using Finisher FS-503 .................................................................... 9-15

9.4.1 Non-sort / Collated / Uncollated Output to the

Primary (Main) Tray ...................................................................... 9-17

9.4.2 Stapling Output to the Primary (Main) Tray .................................. 9-19

9.4.3 Collated / Uncollated Output to the Secondary (Sub) Tray ......... 9-22

9.5 Using Large Capacity Stacker LS-501/LS-502 ............................ 9-25

9.6 Using Folding Unit FD-501 ............................................................. 9-28

9.6.1 Punching File Holes in Copies ..................................................... 9-29

9.6.2 Folding Copies ............................................................................. 9-32

9.7 Using Saddle Stitcher SD-501 ....................................................... 9-34

9.7.1 Making Folded Booklet ................................................................ 9-34

9.7.2 Folding Copied Set ...................................................................... 9-38

9.8 Using Post Inserter on Folding Unit FD-501 ................................. 9-42

9.9 Using Folder/Finisher Functions Manually ................................... 9-46

9.10 Using Perfect Binder PB-501 ......................................................... 9-50

x-6 bizhub PRO 1050/1050e

9.11 Using Two Copiers in Tandem .......................................................9-67

9.11.1 To Stop Scanning/Printing ............................................................9-73

9.11.2 Troubleshooting ............................................................................9-74

10 Advanced Information

10.1 Checking Feature Selections by Proof Copying ...........................10-3

10.2 Checking Feature Selections Before Copying (Check Mode) .....10-5

10.3 Interrupt Copying ............................................................................10-9

10.4 Storing and Recalling Job Conditions (Mode Memory) .............10-11

10.4.1 Storing Job Conditions ...............................................................10-11

10.4.2 Recalling Stored Job Settings ....................................................10-15

10.5 Recalling Previous Job Settings ..................................................10-17

10.6 Displaying Screen for Operation Guide (Help Mode) .................10-19

10.6.1 To Display Help Screen ..............................................................10-20

10.7 Adjusting Response Time of Touch Keys (Accessibility) ...........10-22

11 Machine Status Screen Setting

11.1 Machine Status Screen Setting Outlines .......................................11-3

12 Paper Setting

12.1 Paper Setting Outlines ....................................................................12-3

12.1.1 Setting Items in Paper Setting ......................................................12-3

12.1.2 Recommended Setting of Paper Type/Weight ...........................12-10

12.2 Register Paper Type/Weight ........................................................12-11

12.3 Delete Paper Type/Weight ............................................................12-17

12.4 Set Paper Size, Conditions, Air Assist Function for a Tray .......12-19

12.5 Change Paper Type/Weight Specified for a Tray .......................12-29

13 Adjustment

13.1 Machine Adjustment Outlines ........................................................13-3

13.2 01 Magnification Adjustment ..........................................................13-4

13.3 02 Timing Adjustment ...................................................................13-13

13.4 03 Centering Adjustment ..............................................................13-22

13.5 Finisher Adjustment Outlines .......................................................13-24

13.6 01 Stapler Position Adjustment ....................................................13-25

bizhub PRO 1050/1050e x-7

13.7 02 Multi Folder (Punch) Adjustment ............................................ 13-31

13.8 03 Multi Folder (Fold) Adjustment ............................................... 13-36

13.9 04 Stacker Adjustment ................................................................. 13-53

13.10 05 Saddle Stitcher Adjustment .................................................... 13-57

13.11 06 Perfect Binder Adjustment ..................................................... 13-76

13.12 07 Trimmer Count Adjustment .................................................. 13-105

14 Controller Setting

14.1 Function Overview .......................................................................... 14-3

14.2 01 Report Type ................................................................................ 14-8

14.3 02 Printer Setting .......................................................................... 14-10

14.4 03 Select Printer Setting .............................................................. 14-17

14.5 04 Spool ......................................................................................... 14-19

14.6 05 Interface Setting ...................................................................... 14-20

15 Utility Screen Settings

15.1 Utility Screen Setting Outlines ...................................................... 15-3

16 User Setting

16.1 01 System Setting ........................................................................... 16-3

16.1.1 01 Language Setting .................................................................... 16-3

16.1.2 02 Buzzer Setting ......................................................................... 16-4

16.1.3 03 1SHOT Indication Time ........................................................... 16-8

16.1.4 04 Default Screen Setting ............................................................ 16-9

16.1.5 05 Auto Reset Setting ................................................................ 16-10

16.1.6 06 Key Response Time .............................................................. 16-11

16.1.7 07 Change User Password ........................................................ 16-12

16.1.8 08 Function Key Setting ............................................................. 16-14

16.2 02 Function Setting ....................................................................... 16-17

16.2.1 01 Feed Tray Setting .................................................................. 16-17

16.2.2 02 ATS Permit ............................................................................ 16-19

16.2.3 03 Auto Paper Type ................................................................... 16-21

16.2.4 02 Each Function Setting ........................................................... 16-23

16.2.5 03 Density Setting ...................................................................... 16-25

16.2.6 03 Photo Mode Density Setting ................................................. 16-29

x-8 bizhub PRO 1050/1050e

16.2.7 04 Image Density Selection ........................................................16-31

16.2.8 04 Preset Zoom ..........................................................................16-33

16.2.9 05 Tandem Setting ......................................................................16-34

16.2.10 06 User Paper Selection .............................................................16-38

16.3 03 Copy Setting .............................................................................16-39

16.3.1 01 Reset Setting .........................................................................16-39

16.3.2 02 Each Function Setting ............................................................16-46

16.4 04 Scanner Setting ........................................................................16-49

16.4.1 01 Default Address Setting .........................................................16-49

16.4.2 02 Each Function Setting ............................................................16-51

16.5 05 Touch Screen Adjustment .......................................................16-53

17 Machine Manager Setting

17.1 Machine Manager Setting Outlines ...............................................17-3

17.2 01 System Setting ............................................................................17-6

17.2.1 01 Power Save Setting .................................................................17-6

17.2.2 02 Time and Date Setting .............................................................17-8

17.2.3 03 Weekly Timer Setting .............................................................17-10

17.2.4 04 Management List Print ...........................................................17-22

17.2.5 05 Operation Prohibit Set ...........................................................17-26

17.2.6 06 Expert Adjustment .................................................................17-29

17.2.7 07 Size Setting ............................................................................17-35

17.2.8 08 Annotation Setting .................................................................17-36

17.2.9 09 Perfect Binding Setting ..........................................................17-43

17.3 02 Manager/Machine Register .....................................................17-49

17.3.1 01 Machine Manager Register ....................................................17-49

17.4 03 Use Auth./Volume Track ..........................................................17-51

17.4.1 01 Authentication Method ..........................................................17-51

17.4.2 02 Volume Track .........................................................................17-56

17.4.3 03 User Authentication Set .........................................................17-61

17.4.4 04 Non register/Output Set .........................................................17-67

17.5 04 Network Setting ........................................................................17-68

17.5.1 01 Machine NIC Setting ..............................................................17-68

17.5.2 02 Controller NIC Setting ............................................................17-70

bizhub PRO 1050/1050e x-9

17.6 05 Copy/Printer Setting .............................................................. 17-128

17.6.1 01 JOB Offset Operating .......................................................... 17-128

17.6.2 02 Continuation Print(Print) ...................................................... 17-129

17.6.3 03 Page No. Position (Booklet) ................................................ 17-130

17.6.4 04 Fixing Prerotation Set ......................................................... 17-131

17.6.5 05 Image Auto Rotation ........................................................... 17-133

17.6.6 06 Interruption Suspend .......................................................... 17-134

17.6.7 07 Copy Reserve Operation ..................................................... 17-135

17.6.8 08 Scan Stop (pull out tray) ...................................................... 17-137

17.6.9 09 Continuation Print (Copy) .................................................... 17-138

17.6.10 10 Original Glass SDF .............................................................. 17-139

17.6.11 11 SDF Auto Setting ................................................................ 17-140

17.7 06 System Connection ............................................................... 17-141

17.7.1 01 User Call .............................................................................. 17-141

17.8 07 Security Setting ...................................................................... 17-142

17.8.1 01 Machine Manager Password .............................................. 17-142

17.8.2 02 HDD Management Setting .................................................. 17-144

17.8.3 03 Security Strengthen mode .................................................. 17-152

17.9 08 Scanner Address Register .................................................... 17-154

17.9.1 01 Send Address Edit/Delete ................................................... 17-154

18 Browser Control Setting

18.1 Web Utilities .................................................................................... 18-3

18.2 Setting Account Track Data .......................................................... 18-5

18.2.1 Adding Account Track ................................................................. 18-6

18.2.2 Editing Account Track Data ......................................................... 18-9

18.3 Setting Scan Transmission Function .......................................... 18-18

18.4 Transmitting Machine Setting File .............................................. 18-24

18.5 Box Edit ......................................................................................... 18-32

18.6 PageScope Web Connection ....................................................... 18-37

18.7 Access ........................................................................................... 18-39

18.8 Screen Configuration ................................................................... 18-40

18.8.1 Logging in Using Administrator Mode ....................................... 18-42

18.9 Administrator Mode ...................................................................... 18-44

x-10 bizhub PRO 1050/1050e

18.10 Administrator Mode – System Tab ..............................................18-44

18.10.1 Administrator Password .............................................................18-44

18.10.2 Device Information ......................................................................18-45

18.10.3 ROM Version ...............................................................................18-46

18.10.4 Online Assistance .......................................................................18-46

18.10.5 Import/Export ..............................................................................18-48

18.10.6 Maintenance ...............................................................................18-49

18.10.7 E-Mail Alert .................................................................................18-51

18.11 Administrator Mode – Print Tab ...................................................18-52

18.11.1 Interface ......................................................................................18-52

18.11.2 Port Settings ...............................................................................18-53

18.11.3 Default Settings ..........................................................................18-54

18.11.4 Administrator Mode – Scan Tab .................................................18-58

18.11.5 Subject Registration ...................................................................18-58

18.11.6 Body Registration .......................................................................18-61

18.12 Administrator Mode – Network Tab .............................................18-64

18.12.1 TCP/IP .........................................................................................18-64

18.12.2 NetWare ......................................................................................18-66

18.12.3 IPP ..............................................................................................18-68

18.12.4 FTP ..............................................................................................18-69

18.12.5 SNMP ..........................................................................................18-71

18.12.6 SMB ............................................................................................18-72

18.12.7 Apple Talk ...................................................................................18-74

18.12.8 E-Mail ..........................................................................................18-75

18.12.9 SSL/TLS ......................................................................................18-77

18.12.10 Authentication .............................................................................18-92

19 Security

19.1 Security Functions ...........................................................................19-4

19.1.1 Environments in which Security Strengthen

mode is recommended .................................................................19-5

19.1.2 Creating a secure environment .....................................................19-5

bizhub PRO 1050/1050e x-11

19.2 Security Strengthen Mode ............................................................. 19-6

19.2.1 Description of Security Strengthen mode .................................... 19-6

19.2.2 Data protected by Security Strengthen mode ............................. 19-7

19.2.3 Data that is not protected in Security Strengthen mode ............. 19-7

19.3 Protect and Delete Data After Use ................................................ 19-8

19.4 User Authentication in Security Strengthen Mode ...................... 19-9

19.4.1 To register a new user ................................................................ 19-10

19.4.2 To change user data .................................................................. 19-15

19.4.3 To delete a user ......................................................................... 19-20

19.4.4 To change password by user ..................................................... 19-23

19.5 HDD Store Function in Security Strengthen Mode .................... 19-26

19.5.1 Store the data in a box while copying ........................................ 19-26

19.5.2 Store scanned data in a box ...................................................... 19-31

19.5.3 Recall/Delete data in a box ........................................................ 19-36

19.5.4 Output data in the Secure Box .................................................. 19-41

19.6 Machine Manager Security Functions ........................................ 19-46

19.6.1 Turn Security Strengthen mode ON/OFF ................................... 19-46

19.6.2 HDD lock password ................................................................... 19-50

19.6.3 Print audit log ............................................................................. 19-55

19.6.4 Analyze audit log ........................................................................ 19-58

20 Troubleshooting

20.1 If “Please Call Service” Message Is Displayed ............................ 20-3

20.2 Clearing Mishandled Paper ........................................................... 20-5

20.3 If MACHINE Tab Blinks in Orange ................................................. 20-8

20.3.1 Paper Misfeed .............................................................................. 20-8

20.3.2 Tray Empty ................................................................................... 20-9

20.3.3 Inconformity in Paper Presetting ................................................ 20-11

20.4 If “Memory Full” Message Is Displayed

(Memory Overflow) ....................................................................... 20-13

20.5 If Power OFF/ON Screen Is Displayed ........................................ 20-14

20.6 Troubleshooting Tips ................................................................... 20-15

x-12 bizhub PRO 1050/1050e

21 Maintenance

21.1 Cleaning Image Scanning Section .................................................21-3

21.1.1 Cleaning the ADF Scanning Glass ................................................21-3

21.1.2 Cleaning the Original Glass ..........................................................21-3

21.1.3 Cleaning the ADF Guide Cover .....................................................21-4

21.2 Precautions for Paste Pellets and the Perfect Binder .................21-5

21.3 Checking Copy Count .....................................................................21-6

21.4 Preventive Maintenance .................................................................21-9

22 Machine Specifications

22.1 Main Body Specifications ...............................................................22-3

22.1.1 Main Body .....................................................................................22-3

22.1.2 ADF (DF-603) ...............................................................................22-5

22.2 Option Specifications ......................................................................22-6

22.2.1 Paper Feeder Unit PF-701 ............................................................22-6

22.2.2 Large Capacity Stacker LS-501/LS-502 .......................................22-6

22.2.3 In-Bin Stapler Finisher FS-503 ......................................................22-7

22.2.4 Folding Unit FD-501 ......................................................................22-8

22.2.5 Saddle Stitcher SD-501 ................................................................22-9

22.2.6 Perfect Binder PB-501 ................................................................22-10

23 Appendix

23.1 How to Input Characters ................................................................23-3

23.1.1 About keys on the character input screen ....................................23-3

23.1.2 About character input ...................................................................23-4

23.2 Setting Data for Import/Export .......................................................23-5

23.3 Configuration Setting ....................................................................23-10

23.4 Font List ..........................................................................................23-15

23.5 PCL Font List .................................................................................23-26

23.6 Glossary ..........................................................................................23-29

23.7 Index ...............................................................................................23-32

bizhub PRO 1050/1050e x-13

ENERGY STAR® Program

The ENERGY STAR Program has been established to encourage the wide-

spread and voluntary use of energy-efficient technologies that reduce energy

consumption and prevent pollution. As an ENERGY STAR Partner, we have

determined that this product meets the ENERGY STAR guidelines for energy

efficiency, based on the following features.

-

Auto Low Power

This function conserves energy by lowering the set temperature of the fix-

ing unit. In the standard setting, Auto Low Power operates automatically

when 15 minutes have elapsed after completion of the last copy, with the

copier remaining in the ready to copy state during that time.

The time period for the Auto Low Power function can be set for 5 minutes,

10 minutes, 15 minutes, 30 minutes, 60 minutes, 90 minutes, 120 min-

utes, or 240 minutes.

-

Automatic Shut-Off

This function achieves further energy conservation by partially turning the

power supply OFF, thereby reducing energy consumption to 75 W or

less. In the standard setting, Automatic Shut-Off follows Auto Low Pow-

er, operating automatically when 90 minutes have elapsed after comple-

tion of the last copy, with the copier remaining in the ready to copy state

during that time.

The time period for the Automatic Shut-Off function can be set for 30

minutes, 60 minutes, 90 minutes, 120 minutes or 240 minutes.

-

Automatic Duplex Copying

To reduce paper consumption, use this function to make double-sided

(duplex) copies, automatically.

-

Combination

To reduce paper consumption, this function can also be used to lay out

and copy a fixed number (2, 4, or 8) of pages onto one sheet of copy pa-

per.

We recommend that you utilize Auto Low Power function, the Automatic

Shut-Off function, Automatic Duplex Copying function, and Combination

function.

x-14 bizhub PRO 1050/1050e

Acknowledgements

-KONICA MINOLTA, KONICA MINOLTA Logo and The essentials of imag-

ing are registered trademarks or trademarks of KONICA MINOLTA

HOLDINGS, INC.

-PageScope and bizhub PRO are registered trademarks of KONICA MI-

NOLTA BUSINESS TECHNOLOGIES, Inc.

Exemption

-No part of this manual may be used or duplicated without permission.

-Manufacturer and Sales Company will have no liability for any influences

caused by using the printing system and this Operator Manual.

-The information written in this Operator Manual is subject to change with-

out prior notice.

2

Note

To operate safely, be sure to read the Safety Information before using the

machine. For details, refer to “Safety Information” on page 1-3.

1Safety Information

Safety Information 1

bizhub PRO 1050/1050e 1-3

1 Safety Information

1.1 Safety Information

This section contains detailed instructions on the operation and maintenance

of this machine. To achieve optimum utility of this device, all operators

should carefully read and follow the instructions in this manual.

Please read the following section before connecting the machine to the sup-

ply. It contains important information related to user safety and preventing

equipment problems.

-Please keep this manual in a handy place near the machine.

-Make sure you observe all of the precautions appear in each section of

this manual.

2

Note

Some parts of the contents of this section may not correspond with the

purchased product.

1.1.1 Warning and Precaution Symbols

The following indicators are used on the warning labels or in this manual to

categorize the level of safety warnings.

1.1.2 Meaning of Symbols

Ignoring this warning could cause serious injury or even death.

Ignoring this caution could cause injury or damage to property.

WARNING

CAUTION

A triangle indicates a danger against which you should take precaution.

This symbol warns against cause burns.

A diagonal line indicates a prohibited course of action.

This symbol warns against dismantling the device.

A solid circle indicates an imperative course of action.

This symbol indicates you must unplug the device.

1Safety Information

1-4 bizhub PRO 1050/1050e

Disassemble and modification

WARNING

• Do not attempt to remove the covers and panels which have been

fixed to the product. Some products have a high-voltage part or a

laser beam source inside that could cause an electrical shock or

blindness.

• Do not modify this product, as a fire, electrical shock, or breakdown

could result. If the product employs a laser, the laser beam source

could cause blindness.

Power cord

WARNING

• Do not scratch, abrade, place a

heavy object on, heat, twist, bend,

pull on, or damage the power cord.

Use of a damaged power cord (ex-

posed core wire, broken wire, etc.)

could result in a fire or breakdown.

Should any of these conditions be

found, immediately turn OFF the

power switch, unplug the power

cord from the power outlet, and

then call your authorized service

representative.

Power source

WARNING

• Use only the specified power source voltage. Failure to do that

could result in a fire or electrical shock.

• Connect power plug directly into wall outlet having the same con-

figuration as the plug. Use of an adapter leads to the product con-

necting to inadequate power supply (voltage, current capacity,

grounding), and may result in fire or shock. If proper wall outlet is

not available, the customer shall ask qualified electrician for the in-

stallation.

• Do not use a multiple outlet adapter nor an extension cord in prin-

ciple. Use of an adapter or an extension cord could cause a fire or

electrical shock.

Contact your authorized service representative if an extension cord

is required.

• Consult your authorized service representative before connecting

other equipment on the same wall outlet. Overload could result in a

fire.

Page is loading ...

Konica Minolta BIZHUB PRO 1050E, BIZHUB PRO 1050, bizhub PRO 1050e Series Owner's manual

Related papers

Other documents