Product Guide
ineo 1051/1200
15.10.09
Product Guide ineo 1051/1200
2
Table of contents
Product Basic.........................................................................................................................3
System Configuration..........................................................................................................4
Engine Specifications ..........................................................................................................7
Print Controller.....................................................................................................................12
Scanner Function................................................................................................................14
System Options Specifications.......................................................................................15
Consumables........................................................................................................................37
Article Numbers...................................................................................................................38
Service Part...........................................................................................................................40
Appendix................................................................................................................................47
Product Guide ineo 1051/1200
3
P
P
r
r
o
o
d
d
u
u
c
c
t
t
B
B
a
a
s
s
i
i
c
c
Development Code
Mirage-M2 Mirage-M1
Classification
Monochrome digital MFP
Type
Console type
Proposed model name
ineo 1051 ineo 1200
Successor model for
N/A
Estimated sales start
09/09
Also available as
KM bizhub PRO 1051 KM bizhub PRO 1200
Max. (peak) monthly page volume
(Q-Zone)
2 million 3 million
Max. average/permanent monthly
page volume
300,000 - 500,000 400,000 – 750,000
MCBJ
50,000
MCBF
300,000
Machine life
90 million (A4) or 7 years
Finishing options
Stapling unit FS-521
Booklet making unit SD-506
Folding and punching unit FD-503
Large capacity stacking unit LS-505
Relay unit RU-506
Smart (GBC) punch unit GP-501
Perfect binding units PB-503
Paper feed options
PF-702
PF-703
PF-703/PI-PFU
Safety & Environement
English/German Data Sheets dBox / Marketing / Safety and Environment
Security
ISO 15408 (under application)
PLEASE NOTICE
Standard paper weight for systems is 80 g/m
2
for monochrome machines and 90 g/m
2
for full colour ones. Since using these standards
result in optimum system performance, all specifications on performance, reliability, maintenance and replacement based on those stan-
dard papers. Using thick papers, labels, transfer and polyester films continuously can increase the wear and tear on replacement parts
and consumables – meaning your servicing costs will go up.
Use the bypass or the lower tray from the paper feed unit when working with materials having such characteristics as polyester films,
textile transfer films and labels. Otherwise, you may be faced with double feeding or a higher number of feeding jams.
If possible use subtray when working with materials having such characteristics as polyester films, textile transfer films and labels. Roller-
marks on the copy or print may appear or increased jams can occur. Standard paper weights yield the best possible copy and print results.
Using higher grammage may influence the quality of the output. Using standard paper weights also guarantees that double sided copies
and prints are made reliably. Different characters of films as well as thick, thin and coated papers may increase the jam rate for double
sided copies and prints
Product Guide ineo 1051/1200
4
S
S
y
y
s
s
t
t
e
e
m
m
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
Approved configurations
Product Guide ineo 1051/1200
5
ineo 1051/1200 sample configurations
(in total 46 finishing configurations are approved)
FS-521 – PB-503 – SD-506 – FD-503 – RU-506 – PI-PFU – ineo 1200(1051) – PF-703 – PF-702/703
FS-521 – LS-505 – FD-503 – ineo 1051 – PF-702/703
FS-521 – LS-505 – RU-506 – GP-501 – PI-PFU – ineo 1200(1051) – PF-702/703
Product Guide ineo 1051/1200
6
FS-521 – SD-506 – RU-506 – GP-501 – PI-PFU – ineo 1200(1051) – PF-703 – PF-702/703
PB-502 – LS-505 – FD-503 – ineo 1051 – PF-702/703
PB-502 – SD-506 – LS-505 – RU-506 – PI-PFU – ineo 1200(1051) – PF-703 – PF-702/703
Product Guide ineo 1051/1200
7
Engine Specifications
Print process
Print method LED electrostatic copying system
Type of drum OPC (Organic Photo Conductor)
Development method
Dry, 2 component
Turnover magnetic brush developing
Image transfer method Belt transfer
Fusing method Heat roller fusing
Original Scanning
Method Mirror scan with Reduction optical system
Feeder capacity (DF) Max. 100 sheets
Light source Rare gas discharge fluorescent lamp
Scan sensor CCD sensor
Writing method
LED array exposure
Scan resolution
CD direction 600dpi
FD direction 600dpi
Write resolution
CD direction 1200 dpi
FD direction 1200 dpi
Gradation
256 gradations equivalent (by controller)
Originals
Type Sheet, books, 3-dimensional objects
Size max A3 or 11”x17”
Weight Max 6.8 kg
Copy / Print media
Weight 40 – 350 g/m
2
Product Guide ineo 1051/1200
8
Paper Main trays
Europe
Standard size: SRA3, A3, B4, A4, SRA4S, A4S, B5, B5S, A5, Postcard,
12”x18”, 11”x17”, 8.5”x14”, 8.5”x11”, 8.5”x11”S, 9”x11”, 8.5”x13”, 8.25”x13”,
8.125”x13.25”, 8”x13”, 5.5”x8.5”
Wide size: A3W, B4W, A4W, A4SW, B5W, B5SW, A5W, 12”x18”W,
11”x17”W, 8.5”x11”W, 8.5”x11”SW, 5.5”x8.5”W
Standard Tab-sheet: B5T, B5ST, A4T, A4ST, B4T, A3T, 8.5”x11”T,
8.5”x11”ST, 11”x17”T, 5.5”x8.5”T
Custom size: (Min) 182 x 139 mm – (Max) 324 x 463 mm
Note:
Maximum possible size for Wide size paper: 324x463mm.
Size switching by paper setting at tray:
Except delivery destinations: Taiwan / China:
Selection A: 8.5”x14”, 8.5”x13”, 8.25”x13”, 8.125”x13.25”, 8”x13” (Default
8.5”x13”)
Selection B: A5, 5.5”x8.5” (Default A5)
Selection C: 12”x18”, SRA3 (Default 12”x18”)
Delivery destinations: Taiwan / China:
Selection A: 8.5”x14”, 8.5”x13”, 8.25”x13”, 8.125”x13.25”, 8”x13” (Default
8.5”x13”)
Selection B: A5, 5.5”x8.5” (Default A5)
Selection C: 12”x18”, SRA3 (Default SRA3)
Selection D: (B4, 11”x17”) / 8K, (B5, 8.5”x11”) / 16K,B5R / 16KR (Default:
(B4, 11”x17”), (B5, 8.5”x11”))
JIS / ISO size of B4 and B5 is switchable by software dipswitch. (Europe
default: ISO)
Straight output
Turnover exit
Duplex unit
Fixed size (4) Straight (5) Turnover (6) Duplex
SRA3 Yes Yes Yes
12” x 18” Yes Yes Yes
A3 Yes Yes Yes
A4 Yes Yes Yes
11” x 17” Yes Yes Yes
8.5” X 14” Yes Yes Yes
8.5” x 11“ Yes Yes Yes
9”x11” Yes Yes Yes
8K Yes Yes Yes
16K Yes Yes Yes
B4 Yes *2 Yes *2 Yes *2
B5 Yes *2 Yes *2 Yes *2
SRA4S Yes Yes Yes
8.5” x 11“S Yes Yes Yes
A4S Yes Yes Yes
A5 Yes Yes Yes
8.5" x 13” Yes Yes Yes
8.25” x 13” Yes Yes Yes
8.125” x 13.25” Yes Yes Yes
8” x 13” Yes Yes Yes
16KS Yes Yes Yes
B5S Yes Yes Yes
Postcard Yes *3 Yes *3 Yes *3
Free max 324mm x 463mm
Free min 95mm x 133mm
Product Guide ineo 1051/1200
9
Void area (Frame area)
Leading edge: 3 mm or less, trailing edge: 2 mm or less,
Right / left edge: 2 mm or less
Image writing area
CD direction: 313.9 mm
(1200 dpi: 14834 dot, 600 dpi: 7417 dot)
FD direction: 462.96 mm
(1200 dpi: 21883 dot, 600 dpi: 10942 dot)
Warm-up time
480 sec or less (20ºC, 50%RH, rated voltage)
First copy- (print-) out time
ineo 1200: 2.8 sec or less (A4, 8.5”x11”)
ineo 1051: 3.0 sec or less (A4, 8.5”x11”)
Continuous Copy / Print
Speed
Simplex
ineo 1200: 120 ppm (A4), 70 ppm (A3), 68 ppm (11”x17”)
ineo 1051: 105 ppm (A4), 60 ppm (A3), 59 ppm (11”x17”)
Duplex
ineo 1200: 120 ppm (A4)
ineo 1051: 105 ppm (A4)
Copy productivity
ineo 1200: 76% or more (A4)
ineo 1051: 80% or more (A4)
OPM
105 OPM or more (A4)
103 OPM or more (8.5”x11”)
Magnification ratios
Japan Europe North America
2.000 2.000 2.000
1.414 1.414 1.545
1.224 1.189 1.294
1.154 1.189 1.214
Default: 1.000 1.000 1.000
0.866 0.840 0.785
0.816 0.840 0.772
0.707 0.707 0.647
0.500 0.500 0.500
Preset Zoom
Variable range: x0.250 to x4.000 in steps of 0.001
Zoom memories: 3
Direction independent zoom
x0.250 to x4.000 in steps of 0.001, Width and Length magnification
independently settable.
Paper feed capacity
2 Trays
Capacity: each 1500 sheets
Copy density control
Fixed density 9 levels (manual adjustment), Preset Density 2 levels
Auto density selection
The density of originals is automatically classified, background auto-detected
and removed.
Background density
adjustment
9 levels (manual adjustment)
Multi copy setting
1 – 9999 pages
Duplex method
Switch-back turnover, non-stack method
Paper weights 40 – 244g/m²
Product Guide ineo 1051/1200
10
Operation panel
Vertical type, 10-key / function keys / 15 inch 38cm colour LCD touch panel
Image memory
Memory size
768 MB (DRAM) + 160 GB (HDD)
HDD: 160 GB (40 GB used for RawHDD, 120 GB for Box storage.)
Number of originals able to
be stored
10000 pages or more (1 bit + ED)
<Conditions>
Original: FAX 4CHART / A4 (published by IIEEJ)
Density: manual 5
Mode: Text & Photo
Original selection
Image mode selection: Auto, Dot matrix, Text, photo
Set direction: Up, down, Left, Right
Binding direction: Left/Right binding, Top binding
Special originals: Plain original, Mixed original, Z-Folded original, One
sheet feed
Size: Standard, Custom size (Standard / Variable size /
Registered custom size), Index
Media selection
Size selection or setting: Auto, Wide, Standard, Custom (Variable size,
Variable name registration), Index
Media type: Coated paper, Pre-printed paper, High quality paper, Plain
paper, Book paper, Rough paper, Insert Blank Sheet
Paper weight: 40 - 49 g/m
2
, 50 - 61 g/m
2
, 62 - 71 g/m
2
,
72 - 91 g/m
2
, 92 - 130 g/m
2
, 131 - 161 g/m
2
,
162 - 216 g/m
2
, 217 - 244 g/m
2
,
245 - 300 g/m
2
, 301 - 350 g/m
2
Magnification selection
Auto magnification, Fixed setting, User preset, Free zoom setting
Image quality setting
Image type: Text/photo, Dot matrix, Photo, Text
Background: Background adjustments
Registered density: Registration 1, 2
Image quality adjustments
Density adjustments: Auto, Manual
Application adjustment: Sharpness
Image distinction level (Text / Picture area; Picture
detection)
Print function List print function, Counter print function
Utility
Counter display, User setting (System settings / Function settings / Copier
setting / Scan setting / Touch Panel Adjustment), Admin setting
Counters
Total / Feed / Output / Scanner / Copy / Print / PM / Developer /
Photoconductor / CRU counter
Product Guide ineo 1051/1200
11
Copy operations
Interrupt Mode / Auto reset / Auto shut off / Low power mode / Weekly timer /
Self-diagnosis / Remote diagnostic system / Electronic key counters (1000) /
Auto tray switch / Tray paper level status indicator / Tray dehumidifier heater /
Selection of indicated paper-weight-unit for trays / Per tray setting / Tray Paper
Type Registration / Custom Size Name registration / Job Memory / Job
Reservation / Job Management (Reserved jobs, Printout Log, Send Log, Hold
Log, Not printed jobs, Spooling jobs) / Program Job (up to 100 jobs) / Memory
Copy / Proof Copy / Image Rotation OFF key / Sheet Insertion / Chapter /
Combination / Booklet / Perfect Binding / Image Insert / Book copy / No Image
Area Erase / Neg.Pos.Reverse / All-Image Area / Image Repeat / Frame/Fold
Erase / Image Centering / Image shift / Stamp/Overlay / Advanced HDD
functionalities / Thumbnail Display at Operation panel / Unneeded Tab-sheet
Ejection / Auto-shift Tab printing / Sample Output function / Offset output by
number of sets / Optional insertion of partitioning sheets / Print interruption at
any time / Recover jobs over power-down / E-mail notification / Web Utility /
Pixel ratio monitor / Key response time setting / Panel brightness adjustment
dial / Data status LED / HDD Security
Power supply
Rated voltage Europe: 230V
Rated current Europe: 25A
Rated Frequency Europe: 50Hz
Max. power consumption
Europe: 5.0 kW or less
(Main unit + PF703/PF703 + RU506 + PF703 + FD503 + SD506 + FS521)
Dimensions
Main unit 990 x 780 x 1233mm (1464 with panel)
Example configurations:
(Main unit + PF702 + RU506 + FD503 + SD506 + FS521)
WxDxH: 3091 x 780 x 1233 mm (DF output trays)
(Main unit + PF703 + RU506 + FD503 + FS521)
WxDxH: 4326 x 780 x 1233 mm (DF output trays)
(Main unit + PF702 + RU506 + LS505 + LS505)
WxDxH: 3717 x 780 x 1233 mm (DF output trays)
Weight (main unit)
375 kg
System space
requirements
Space of 200mm or more at the back side and 100mm or more on both sides
of the system must be preserved.
Power consumption in
energy saving mode
Power Consumption in
Low Power mode
550 W or less ineo 1200: 400 W or less
Ineo 1051: 355 W or less
Transition time to Low
Power mode
15 min (adjustable between 5 and 240 min)
Recovery time from Low
Power mode
30 sec or less
Power Consumption in
Sleep mode
105 W or less
Transition time to
Auto shut off mode
90 min (adjustable between 30 and 240 min)
TEC (Typical Electricity
Consumption of 1 week)
ineo 1200: 54.0 kWh or less
ineo 1051: 43.5 kWh or less
Product Guide ineo 1051/1200
12
Document Feeder (ADF)
General
Type Sheet through type
Face-up setting
Automatic Feeder
Applied machine ineo
+
1051/1200
Installation Standard with main body
Specifications
Power source DC24 ( ±10% ); 5,1V ( ±10% ) (Supplied from the main frame)
Power consumption Less than 100W
Dimensions 650(W) x 570(D) x 170(H) mm
Weight Approx. 22 kg
Original Paper Size
- Maximum (W) 297mm x (L) 431,8mm
- Minimum (W) 128mm x (L) 139,7mm
Normal original size for APS A3, B4, A4, B5, B5R
Original Paper Weight
50 - 200g/m²
(Simplex ADF: 50-130g/m², Simplex SDF: 50-200g/m²,
Duplex ADF/SDF: 50-130g/m²)
Paper curl Less than 10mm
Original Paper Capacity
100sheets (80g/m² paper)
Speed
Simplex mode 105 opm (A4)
60 opm / 120 ipm (A3)
Duplex mode 60 opm (A4)
15 opm / 30 ipm (A3)
Product Guide ineo 1051/1200
13
P
P
r
r
i
i
n
n
t
t
C
C
o
o
n
n
t
t
r
r
o
o
l
l
l
l
e
e
r
r
Type
Build-in type
Resolution
1200 x 1200 dpi
Interface
Ethernet 1000BASE-T / 100BASE-TX / 10BASE-T
IPv6, USB2.0 (not for printing)
Ethernet port
Port 9100
Network protocol
TCP/IP (LPR, RAW socket), IPX/SPX (NDS, Bindery), NetBEUI, IPP, Ether
Talk
PDL
PCL5E/XL (PCL6) / Adobe PostScript (PS3017) / PDF direct print (PDF
Ver.1.6) / TIFF direct print/PPML (06/2010)
Resident fonts
PCL: Western Type: 80 outline
PS Western Type1 font: 136 outline
Driver
PCL6 / PS PPD / PS Plug-In
OS
PCL
Windows2000/XP/2003server, WindowsVista, WindowsXP/2003serverx64,
WindowsVista x64
PS PPD/PS Plug-In
Windows2000/XP/2003server, WindowsVista, WindowsXP/2003serverx64,
WindowsVista x64
MacOS9 9.2 (Japan only), MacOSX 10.2 (Japan only)/10,3, MacOSX 10.4
(PPC/Intel), MacOSX 10.5 (PPC/Intel)
Printer driver function
Driver PCL/XL, PS PPD, PS Plug-In
Others Staple orientation (Left, Head, Right and Auto stapling) / Duplex print
(LEF/SEF) / Full-Bread print / Paper feed tray selection / Paper feed exit
selection / Print setting by registered paper name / Special paper name setting
/ Pre-print temporary stop function (wait) / Proof print / Print resolution
selection (1200dpi/600dpi) / Print Density selection / Toner save mode / Offset
function / Staple function / Blank Page Skip / Sort/Group setting / Combination
/ Booklet / Centering Imposition / Glue Binding / Sheet insertion / Front/Back
cover insertion / Image shift / Tab paper image shift function / Image creaping
function / Space distance setting between the pages / Print position
adjustment function / Finishing functions / Perfect Binding / Watermark /
Date/Time over writing / Page Over-writing / Stamp numbering / Watermark
numbering / Copy Protection print / Form overlay / Narrow line mode /
Screening (Adobe Std./DV Std.// Screen frequency/angle *only PS Plug-in /
Transcription paper type setting / Paper type setting / Paper weight setting /
Colored paper setting / Perforated paper setting / AMS / APS/ATS / N-up /
Zoom / Chapter / Password print / Job combination / Smoothing / Straight
exit/Reverse exit / Page Sequence setting / Tab area print / Tab full bleed print
/ Tab 2bank support / Tab insertion / MixPlex / Function page scope setting /
Per page setting / User authentication/Department management / Version
display / Pile permission / Enhanced security mode / Send message / Header
page / From function / Mac key chain compliance
Product Guide ineo 1051/1200
14
S
S
c
c
a
a
n
n
n
n
e
e
r
r
F
F
u
u
n
n
c
c
t
t
i
i
o
o
n
n
Network Scanner function
Original type Sheet / Book / Solid objects
Max. original size A3 (297 x 420 mm) / 11”x17” (279.4 x 432 mm)
Solid object
Thickness: Max. 30 mm
Weight: Max. 6.8 kg
Original feed base Left rear base
Reading resolution 200, 300, 400, 600, 1200 dpi (1200 dpi interpolated)
Scanning speed 105 OPM
Interface Ethernet (1000Base-T / 100Base-TX / 10Base-T)
Scan method
Scan to HDD
Scan to FTP, Scan to PC
Scan to Email
HDD to FTP/SMB
Scan File Format TIFF / PDF / Encrypted PDF / XPS
Real Mode Twain Supported
Applications
Application
EMS Plug-in
HDD Twain Driver
Real Mode Twain Driver
Direct Print
Print Status Notifier
Font Management Utility
ineo Remote Care (option)
Workware (option)
Enterprise Device Manager
Web Connection
Tone Curve Utility
Product Guide ineo 1051/1200
15
S
S
y
y
s
s
t
t
e
e
m
m
O
O
p
p
t
t
i
i
o
o
n
n
s
s
S
S
p
p
e
e
c
c
i
i
f
f
i
i
c
c
a
a
t
t
i
i
o
o
n
n
s
s
PF-702 – Paper Feed Unit
Product Name
PF-702
Type
Large Capacity Tray with friction feed technology, installation to main body
Kinds of Paper
Plain, High Quality, Colour, Coated, Rough, Label, Recycle (40 – 350g/m²)
Middle tray: 301-350g/m²
Paper Sizes
(EU)
Regular
, A,,,,,,,
Wide
W, BW, AW, AW, BW, BW, AW, 12“×18”W,1“×17”W
8.5“×11”W,.5“×11”W,.5“×8.5”W
Regular index
B5T, 5ST, 4T, 4ST, 4T, 3T, 5x11T,.5x11ST, 1xx17T, 5”x8.5“T
Irregular
Min.182x139 (95 x 139 with SSG*) Max. 324 x 463mm
Note:
* Small size guide (SSG): The width between 95 and 182mm has to use the
SSG. On usage of SSG, the minimum paper size is 95x139mm. The SSG is
standard on PF-702.
Capacity
6,000 Sheets (80 g/m²) 2,000 sheets * 3 trays
Power Source
From Main Body or PF-703 : DC 36V, 24V, 12V, 5V
Power Consumption
Less than 110 W
Dimension
809(W) x 1038(H)mm x 780(D)
Weight
150kg
Durability
Same as main unit
Product Guide ineo 1051/1200
16
PF-703 - Paper Feed Unit
Product Name
PF-703
Type
Large Capacity Tray with vacuum feed technology, installation to main body
Kinds of Paper
Plain, High Quality, Color, Coated, Rough, Label, Recycle (40 - 350g/m²)
Middle tray: 301-350g/m²
Function
On attachment of FA-502, it is possible to use as the function of PI. Note: In
that case, RU-506 always needs to be connected
Option for PF-703: HT-505 (Fan heater for decreasing moisture)
(US)
Regular
, A, , , , , , ,
Wide
W, BW, AW, AW, BW, BW, AW
Regular index
B5T, B5ST, A4T, A4ST, B4T, A3T, 8.5x11T,.8.5x11ST, 11x17T
Irregular
Min. 182x139 Max. 324 x 463mm
(EU)
Regular
, A, , , , , , ,
Wide
W, BW, AW, AW, BW, BW, AW
12“×18”W11“×17”W
8.5“×11”W8.5“×11”W5.5“×8.5”W
Regular index
B5T, B5ST, A4T, A4ST, B4T, A3T, 8.5x11T,8.5x11ST
Irregular
Min. 182x139 (95 x 139 with SSG*) Max. 324 x 463mm
Paper Sizes
<Note>
* Small size guide (SSG): The width between 95 and 182mm has to use the
SSG. On usage of SSG, the minimum paper size is 95x139mm. The SSG is
standard on PF-703
Capacity
5,000 Sheets (80 g/m²)
Tray1: 1,300 sheets
Tray 2+3: 1,850 sheets per tray
Power Source
DC 36V,24V,12V,5V AC 200240V(50/60Hz)
Power Consumption
DC: Less than 90W,AC:Less than 100 W
Dimension
871.5(W) x 1038(H)mm x 780(D)
Weight
186kg
Durability
Same as main unit
Product Guide ineo 1051/1200
17
FA-501 - Mounting Kit
Type
Mounting kit required to connect PF-703 as PI (Post Insertion) PFU
Other specifications
Dimensions
(Parts of feeding): (WxHxD) 200 x 150 x 580 mm
(Parts of extension): (WxH) 575 x 608
(WxH) 575 x 375 mm
Weight 9 kg (Total)
Paper
Media size
Length: Mini 139 x max 463mm
Width: Min 95 x max 324mm
Capacity 120 ppm
Replacement cycle
Component Qty. Replacement cycle
Exit roller 2 100k
Durability
Same as main unit
RU-506 - Relay Unit
Type
Conveyor unit with paper cooling functionality
Configuration
ineo 1200
ineo 1051 (systems with PI-PFU and/or GP-501)
Other specifications
Power supply DC24V,5V (from main engine)
Power Consumption 63W
Dimensions (WxHxD) 350 x 1020 x 775 mm
Weight 45kg
Functionality
when printing on one surface, it can stack two sheets and pass to
post-processing option for matching the speed of option to
one of main body
Processing speed
ineo 1200 120 ppm (A4, Letter (8-1/2”x11”)
ineo 1051 105 ppm
Productivity
100% in all modes
Media sizes
SRA3, A3, B4, A4, SRA4S, A4S, B5, B5S, A5
A3W, B4W, A4W, A4SW, B5W, B5SW, A5W
B5T,B5T,A4T,A4T,B4T,A3T
Min: 95 x 139 mm / Max: 324 x 463 mm
Media weight
Straight mode: 40 to 350 g/m²
Stacking mode: 40 to 216 g/m²
Product Guide ineo 1051/1200
18
FS-521 Staple Finishing Unit
Type
100-sheet staple finisher with staple cutting mechanism and large capacity
output tray
Configuration
2 output trays
Modes: Staple
Straight, Shift, Sub-tray output
Consumables: Staple needles (1 cartridge, 5000 needles)
Other specifications
Power supply DC24V, 5V (supplied by Main engine)
Power Consumption 110VA
Dimensions
(WxHxD) 544 x 1020 x 723 mm (excl. Main tray)
Width incl. Main tray (retracted): 798 mm
Width incl. Main tray (extended): 915 mm
Weight 80 kg
Functionality
Straight mode: no finishing, output to main tray
Shift mode: Shifting, output to main tray
Sub-tray mode: no finishing, output to sub-tray
Staple mode: after staple operation, output to stacker
Sub-set staple mode: output of stapled sets and single pages in random
order to Main tray
Processing speed
105 ppm (ineo
+
1200 configurations need the RU-506)
Staple functionality
Media size
A3, B4, A4, A4S, B5, A5, SRA3, SRA4, SRA4S,
Foolscap (8”x13”), (8-1/4”x13”), (8-1/2”x13”), (8-1/8”x13-1/4”),
12”x18”, Ledger (11”x17”), Legal (8-1/2”x14”),
Letter (8-1/2”x11”), Letter (8-1/2”x11”)S, Invoice (5-1/2”x8-1/2”),
Executive (7-1/4”x10-1/2”), 9”x11”
8K, 16K,
ISOB5, ISOB4,
Free paper, Wide paper, Standard Tab paper
Min: 203 x 139 mm / Max: 324 x 463 mm
Media weight
60 to 244 g/m²
Product Guide ineo 1051/1200
19
Staple capacities
<Uncoated paper>
50 – 71 g/m²: 100 sheets (50 sheets, if length ≥400)
72 – 81 g/m²: 100 sheets (50 sheets, if length ≥400)
82 – 91 g/m²: 60 sheets (50 sheets, if length ≥400)
92 –130 g/m²: 50 sheets
131 -161 g/m²: 40 sheets
162 -244 g/m²: 25 sheets
<High Quality paper>
50 – 71 g/m²: 50 sheets (20 sheets, if length ≥320)
72 – 81 g/m²: 30 sheets (50 sheets, if length ≥320)
82 – 91 g/m²: 30 sheets (50 sheets, if length ≥320)
92 –130 g/m²: 30 sheets
131 -161 g/m²: 30 sheets
162 -244 g/m²: 25 sheets
<Coated paper, and Color paper>
50
– 71 g/m²: 35 sheets (50 sheets, if length ≥400)
72 – 81 g/m²: 35 sheets (50 sheets, if length ≥400)
82 – 91 g/m²: 35 sheets (50 sheets, if length ≥400)
92 –130 g/m²: 30 sheets
131 -161 g/m²: 25 sheets
162 -216 g/m²: 20 sheets
217 -216 g/m²: 15 sheets
Rear 1x 45º / Front 1 / Center 2
Staple type
Inline clinch (staple cutting mechanism)
Tray capacity
2 to 9 stapled sheets: 150 sets (paper length: 182 to 364 mm)
75 sets (other paper length)
10 to 20 stapled sheets: 50 sets
21 to 30 stapled sheets: 30 sets
31 to 40 stapled sheets: 25 sets
41 to 50 stapled sheets: 20 sets
51 to 60 stapled sheets: 15 sets
61 to 100 stapled sheets: 10 sets
Storage capacity for cut
staple needles
150k
Straight / shift
functionality
Media size
Big size: A3, B4, SRA3, SRA4, SRA4S,
Foolscap (8”x13”), (8-1/4”x13”), (8-1/2”x13”),
(8-1/8”x13-1/4”), 12”x18”,
Ledger (11”x17”), Legal (8-1/2”x14”), 13”x19”
8K,
ISOB4,
Wide paper (Max: 324 x 460 mm)
Small size: A4, A4S, B5, B5S,
Minimum size: A5, A5S, B6S,
Invoice (5-1/2”x8-1/2”), Invoice (5-1/2”x8-1/2”)S,
Other: Free paper(148 x 139 mm to 324 x 463 mm),
Standard Tab paper
Straight mode only: 13”x19”, Invoice (5-1/2”x8-1/2”)S, B6S,
Free paper(128 x 139 mm to 331 x 483 mm)
Product Guide ineo 1051/1200
20
Media weight
40 to 350 g/m²
Tray capacity
g/m² / Size Big size Small size Minimum size
41 to 71 g/m² 500 750 100
72 to 81 g/m² 1500 3000 (1500) 750
82 to 91 g/m² 1000 2000 (1500) 500
92 to 130 g/m² 750 1500 400
131 to 161
g/m²
750 1500 350
162 to 216
g/m²
500 1000 250
217 to 244
g/m²
375 750 200
245 to 300
g/m²
375 750 200
301 to 350
g/m²
250 500 100
Media size
A3, B4, A4, A4S, B5, B5S, A5, A5S, B6S, A6S, Postcard-S, SRA3, SRA4,
SRA4S,
Foolscap (8”x13”), (8-1/4”x13”), (8-1/2”x13”), (8-1/8”x13-1/4”),
13”x19”, 12”x18”, Ledger (11”x17”), Legal (8-1/2”x14”),
Letter (8-1/2”x11”), Letter (8-1/2”x11”)S,
Invoice (5-1/2”x8-1/2”), Invoice (5-1/2”x8-1/2”)S, 9”x11”,
Executive (7-1/4”x10-1/2”), Executive (7-1/4”x10-1/2”)S,
8K, 16K, 16KS,
ISOB5, ISOB5S, ISOB4,
Free paper, Wide paper, Standard Tab paper
Min: 95 x 133 mm / Max: 331 x 488 mm
Tray capacity
200 sheets
(Z-fold: 20 sheets / Center fold: 40 sheets)
Replacement cycle
Component Qty. Replacement cycle
Transfer roller / A 750k
Staple unit / front 500k
Staple unit / rear 500k
FS solenoid / A 5000k
Solenoid / 1 set assy 5000k
Durability
50 million sheets or 5 years
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/