Grearden ZHRS210127 Installation guide

Brand
Grearden
Model
ZHRS210127
Type
Installation guide
ASSEMBLY INSTRUCTIONS
Dear Customer,Thank you for your order.
If you have questions or quality problems during the installation and use,
We hope our products will give you a great shopping experience. Thank you!
please email us at first thought your order(or email to us: [email protected]).
we will reply you within 12 hours and solve your problem as soon as we can.
I
G
G
PARTS AND HARDWARE
Avoid using sharp objects such as a knife to cut open packing
as you may accidentally damage the upholstery.
A:1PC
B:1PC
C:1PC
D2:1PC
F:20PCS
H:1PC
D1:1PC
I:1PC
E:1PC
D1
B
M6*40
G:20PCS
M6*15
J:1PC
E
D1
B
PREPARATION
Before beginning assembly of product, make sure all parts are present.
Compare parts with parts list.If any part is missing or damaged, do not
attempt to assemble the product and contact us immediately.
Do not fully tighten bolts until assembly is complete.
Step 1
Step 2
This screws is installed first
There is a screw hole on part D1
There're 2 screw holes on side for parts B
C
A
D2
B
E
Dear customer,
Thanks for your order.
Here is the installation video on YOUTUBE.
The Youtube code is kpO4Q5vkq1Y, you just search the code on
YOUTUBE, the video will be there.
Just remind: Do not tighten too tightly when installing, Please tighten
after installing. (This is the most important step.)
Hope it will be helpful for you
Have a nice day!
Step 3
Step 4
Step 5
Finally install the lining
First find the zipper head, stick the back
of the zipper head to D2, and stick it along D2
for a round to complete
The parts can not be installed
  • Page 1 1
  • Page 2 2
  • Page 3 3

Grearden ZHRS210127 Installation guide

Brand
Grearden
Model
ZHRS210127
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents