True Manufacturing GDM-7 Datasheet

Type
Datasheet

This manual is also suitable for

Glass Door Reach-In Refrigerators
(counter-top models)
GDM-5, GDM-5PT, GDM-7,
GDM-9 & GDM-9K
5
YEAR
COMPRESSOR
R
R
®
S
A
V
I
N
G
S
E
N
E
R
G
Y
S
CABINET CONSTRUCTION:
Durable and permanent non-peel or chip white vinyl exterior.
White, vinyl coated aluminum interior cabinet liner with 300 series stainless
steel floor. Construction of liner in accordance with NSF standards.
Safety shielded fluorescent interior lighting.
DOORS:
Triple pane thermal insulated glass. Door gaskets of one piece construction.
Adjustable, self closing, torsion type closure system on swing door models
(counter-balanced weight system; self closing doors for GDM-9 &
GDM-9K slide door). The face of each door fitted with a 12" long handle.
INSULATION:
Entire cabinet structure insulated using foamed-in-place CFC free
polyurethane foam.
SHELVING:
Adjustable vinyl coated wire shelves. Shelves capable of supporting up
to 250 lbs.
Full height shelf support pilasters, with double oblong holes on 1/2"
centers. Pilasters made of the same material as cabinet interior. Four (4)
chrome plated, stainless steel shelf clips to be included for each shelf.
REFRIGERATION SYSTEM:
Refrigeration system factory balanced using CFC free 134A refrigerant.
Condensing unit easily accessed for maintenance.
Factory pre-engineered capillary tube system with oversized condenser
and evaporator to reduce product pull down time and to consistently
maintain 33°F to 38°F interior cabinet temperature. (non-adjustable
capillary tube system superior to problematic expansion valve)
Evaporator - epoxy coated at the time of manufacture to eliminate the
potential of corrosion.
ELECTRICAL CHARACTERISTICS:
Unit completely pre-wired at factory, and ready for final connection to
a 115/60/1 phase - 15 amp dedicated outlet. A cord and plug set to be
included.
A sole use circuit is required.
SPECIFICATIONS / FEATURES
TRUE is the world’s largest manufacturer of
glass door merchandisers.
GDM-5
Also available:
Stainless Steel Exterior
GDM Series -
Glass Door Merchandisers
(Counter-Top models)
TRUE FOOD SERVICE EQUIPMENT, INC.
St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri 63366
(636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
AIA #
SIS #
Project Name:
Location:
Item #: Qty:
Model #:
Exceptions:
Printed in
U.S.A.
2/03
APPROVALS:
Specifications subject to change without notice.
Remote cabinets available 14% off list
(condensing units supplied by others).
Consult factory technical service dept. for BTU information.
115/60/1
NEMA-5-15R
Dimensions Cord
Capacity # of (inches) NEMA Length Crated
Model Doors (Cu. Ft) Shelves L D
H HP Volts PH Amps Config. (feet) Weight
GDM-5 1 swing 5 2 24 23 1/2 37 1/5 115 1 4.0 5-15 6 165
GDM-5-PT 1 fr/1bk 5 2 24 24 37 1/5 115 1 5.2 5-15 6 195
GDM-7 1 swing 7 2 1/2 24 24 3/4 39 3/4 1/5 115 1 4.5 5-15 6 190
GDM-9 2 slide 9 2 1/2 36 22 1/4 39 5/8 1/5 115 1 6.2 5-15 6 240
GDM-9K 2 slide 6.5 1 1/2 36 22 1/4 30 3/16 1/5 115 1 6.2 5-15 6 235
®
GDM Series: Glass Door Merchandisers - Counter-Top
GDM-9 GDM-9K
Depth does not include 1 3/8 for handle on swing door models
(GDM-5PT has handles front and back); or 3/4 on slide door models.
GDM-7 height includes 2 1/2 for legs.
All models listed available with stainless steel exterior.
Oversized and balanced, environmentally
friendly (134A) refrigeration system - holds
33°F to 38°F.
White laminated vinyl exterior.
White, vinyl coated aluminum interior
and 300 series stainless steel bottom (NSF
approved).
Adjustable vinyl coated wire shelves.
Triple pane thermal glass.
Fluorescent interior lighting.
Positive seal torsion type closure system,
self-closing swing doors. Counter-
balanced weight system self-closing doors
for GDM-9 & GDM-9K slide door.
Epoxy coated evaporator.
Foamed-in-place polyurethane high
density cell insulation (CFC free).
1 year parts & labor warranty (USA).
Novelty baskets available for GDM-5 & -7.
Additional shelves available.
A variety of sign panels available (excluding
GDM-9 & GDM-9K).
Standard Features ____________________________________________________________________________________________
Optional Accessories______________
TRUE FOOD SERVICE EQUIPMENT
St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri 63366 • (636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
Printed in U.S.A.
Rough-In Data
Specifications subject to change without notice.
GDM-5 GDM-5-PT GDM-7
5
YEAR
COMPRESSOR
R
R
®
S
A
V
I
N
G
S
E
N
E
R
G
Y
S
Model Front Right Plan 3D
GDM-5 TFAY50E TFAY50S TFAY50P TFAY503
GDM-5-PT TFAY50E TFAY51S TFAY51P TFAY513
GDM-7 TFD033E TFD033S TFD033P TFDY333
GDM-9 TFAY70E TFAY70S TFAY70P TFAY703
GDM-9K TFAX71E TFAX71S TFAX71P TFAX713
5 year compressor warranty.
See our website www.truemfg.com for
the latest color & sign offerings.
Clearance Required For Coolers (USA)
Sides Top Rear
Inches/mm Inches/mm Inches/mm
1 / 26 1 / 26 1 / 26
24"
24"
22"
37"
24"
22"
23
1
/
2
"
37"
L - 61 cm
D - 61 cm
H - 94 cm
Door
Swing (2) - 56 cm
L - 61 cm
D - 60 cm
H - 94 cm
Door
Swing - 56 cm
45
1
/
2
"
26"
door size
8
1
/
2
"
68"
20
1
/
2"
21
1
/
4"
36"
32
1
/
2"
2
7
/
8"
30
3
/
16"
2"
1
3
/
4"
22
1
/
4"
22
1
/
8"
20
1
/
2
"
21
1
/
4
"
36"
32
1
/
2
"
2
7
/
8
"
30
3
/
4
"
39
5
/
8
"
2"
L - 92 cm
D - 57 cm
H - 101 cm
1
3
/
4
"
22
1
/
4
"
26"
door size
8
1
/
2
"
L - 92 cm
D - 57 cm
H - 77 cm
24
3
/
4
"
24"
36
5
/
16
"
Door
Height
47
1
/
8
"
2
1
/
2
"
1
3
/
4
"
22
3
/
8
"
KCL
37
1
/
4
"
39
3
/
4
"
L - 61 cm
D - 63 cm
H - 101 cm
Door
Swing - 57 cm
  • Page 1 1
  • Page 2 2

True Manufacturing GDM-7 Datasheet

Type
Datasheet
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI