Glass Door Reach-In Freezers -
Single Door
❒ GDM-5F-PT, ❒ GDM-7F, ❒ GDM-10F,
❒ GDM-12F, ❒ GDM-23F, ❒ GDM-26F
5
YEAR
COMPRESSOR
R
R
®
S
A
V
I
N
G
S
E
N
E
R
G
Y
S
CABINET CONSTRUCTION:
• Durable and permanent non-peel or chip white vinyl exterior.
• White aluminum interior cabinet liner with 300 series stainless steel floor.
Construction of liner in accordance with NSF standards.
• Cabinet mounted on a welded, galvanized frame rail, painted for additional
corrosion protection.
• Safety shielded fluorescent interior lighting. Integrated door light standard
on GDM-23F and GDM-26F.
• Rear wall airflow guard and floor rack prevent frozen product from
blocking optimal airflow (excludes GDM-5F-PT, GDM-7F).
DOORS:
• Triple pane thermal insulated glass. Doors extend full width of cabinet
shell. Door gaskets of one piece construction.
• Adjustable, self closing, torsion type closure system with aluminum block
supports. The face of each door fitted with a 12" long handle.
INSULATION:
• Entire cabinet structure insulated using foamed-in-place CFC free
polyurethane foam.
SHELVING:
• Adjustable vinyl coated wire shelves included. Shelves capable of supporting
up to 250 lbs.
• Full height shelf support pilasters, with double oblong holes on 1/2"
centers. Pilasters made of the same material as cabinet interior. Four (4)
chrome plated, stainless steel shelf clips to be included for each shelf.
REFRIGERATION SYSTEM:
• Refrigeration system factory balanced using CFC free R404A refrigerant.
• Bottom mounted condensing unit - easy access for maintenance.
• Factory pre-engineered capillary tube system with oversized condenser
and evaporator to reduce product pull down time and to consistently
maintain -10°F interior cabinet temperature. (non-adjustable capillary
tube system superior to problematic expansion valve)
• Evaporator - epoxy coated at the time of manufacture to eliminate the
potential of corrosion.
ELECTRICAL CHARACTERISTICS:
• Unit completely pre-wired at factory, and ready for final connection to
appropriate outlet (see diagram below and NEMA listing next page). A
cord and plug set to be included.
• A sole use circuit is required.
SPECIFICATIONS / FEATURES
TRUE is the world’s largest manufacturer of
glass door merchandisers.
GDM-12F
Also available:
• Slide Door Refrigerators
• Wine Merchandiser
• Rear Load Models
• Ice Merchandisers
• Glass End Merchandisers
• Convenience Store Coolers
• Counter-Top Merchandisers
• Floral Merchandisers
GDM Freezer Series -
Glass Door Merchandisers
GDM-5F-PT
GDM-7F
GDM-10F
GDM-12F
GDM-23F
GDM-26F
TRUE FOOD SERVICE EQUIPMENT, INC.
St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri 63366
(636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
AIA #
SIS #
Project Name:
Location:
Item #: Qty:
Model #:
Exceptions:
Printed in
U.S.A.
2/03
APPROVALS:
Specifications subject to change without notice.
Remote cabinets and condensing units available for models
GDM-23F, GDM-49F, and GDM-72F.
For other models
remote cabinets available 14% off list
(condensing units supplied by others).
Consult factory technical service dept. for BTU information.
115/60/1
NEMA-5-15R
115/60/1
NEMA-5-20R
Dimensions Cord
Capacity # of (inches) NEMA Length Crated
Model Doors (Cu. Ft) Shelves L D* H HP Volts PH Amps Config. (feet) Weight
GDM-5F-PT 2 5 2 24 24 37 1/2 115 1 9.8 5-15 9 220
GDM-7F 1 7 2 1/2 24 24 3/4 39 3/4 1/2 115 1 7.0 5-15 9 250
GDM-10F 1 10 3 24 13/16 23 56 3/16 1/2 115 1 8.8 5-15 9 275
GDM-12F 1 12 3 24 13/16 23 65 1/2 1/2 115 1 9.0 5-15 9 300
GDM-23F 1 23 4 27 29 1/2 78 1/4 3/4 115 1 12.2 5-20 9 412
GDM-26F 1 26 4 30 29 1/2 78 1/4 3/4 115 1 12.2 5-20 9 421
®
GDM Series: Glass Door Freezers - Single Door
GDM-5F-PT GDM-7F GDM-10F
* Depth does not include 1 3/8” for door handle (GDM-5F-PT has handles front and back).
Black, rosewood, and walnut vinyl exterior available at no extra charge.
GDM-7F height includes 2 1/2” legs.
• Oversized and balanced, environmentally
friendly R404A refrigeration system - holds
-10°F.
• White laminated vinyl exterior.
• White, vinyl coated aluminum interior
and 300 series stainless steel bottom (NSF
approved).
• Standard backguard and floor rack
improve airflow (excludes GDM-5F-PT,
GDM-7F).
• Fluorescent interior lighting.
• Integrated door light on GDM-23F and
GDM-26F models.
• Positive seal, torsion type closure system,
self-closing doors.
• Adjustable vinyl coated wire shelves.
• Triple pane thermal glass.
• Epoxy coated evaporator.
• Large evaporator and coil heater permit
short defrost cycle.
• Defrost system time initiated, temperature
terminated.
• Automatic evaporator fan motor delay
during defrost cycle.
• Bottom mount compressor.
• Slide out compressor can be serviced easily
and accessed by a single repairman.
❒ Black, walnut and rosewood vinyl exterior
available.
❒ Novelty Baskets.
❒ Additional shelves available.
❒ 2 1/2” castors available for GDM-10F,
GDM-12F, GDM-23F, GDM-26F.
❒ Stainless steel or optional seismic legs
available for GDM-23F, GDM-26F.
❒ Remote available for GDM-23F.
Standard Features ____________________________________________________________________________________________
Optional Accessories ______________
TRUE FOOD SERVICE EQUIPMENT
St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri 63366 • (636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
Printed in U.S.A.
Rough-In Data
GDM-12F GDM-23F GDM-26F
Specifications subject to change without notice.
78
1
/
4
"
28"
29
1
/
2
"
30"
L - 77 cm
D - 75 cm
H - 199 cm
Door
Swing - 72 cm
54
5
/
16
"
9
1
/
4
"
12"
57
1
/
2
"
25"
29
1
/
2
"
27"
L - 69 cm
D - 75 cm
H - 199 cm
Door
Swing - 64 cm
78
1
/
4
"
54
5
/
16
"
9
1
/
4
"
12"
54
1
/
2
"
23"
23
1
/
4
"
24
13
/
16
"
L - 63 cm
D - 59 cm
H - 167 cm
Door
Swing - 59 cm
46
1
/
4
"
64
1
/
2
"
1"
51
3
/
4
"
23
3
/8"
23"
56
3
/16"
24
13
/
16
"
42
3
/8"
7
1
/2"
5
15
/16"
46
3
/8"
L - 63 cm
D - 59 cm
H - 143 cm
Door
Swing - 59 cm
5
YEAR
COMPRESSOR
R
R
®
S
A
V
I
N
G
S
E
N
E
R
G
Y
S
Model Front Right Plan 3D
GDM-5F-PT
GDM-7F TFD033E TFD033S TFD033P TFDY333
GDM-10F TFD020E TFD020S TFD020P TFD0203
GDM-12F TFAY57E TFAY57S TFAY55P TFAY573
GDM-23F TFAZ03E TFAY03S TFAZ03P TFAZ033
GDM-26F TFAY09E TFAY09S TFAY09P TFAY093
• 1 year parts & labor warranty (USA).
• 5 year compressor warranty.
• See our website www.truemfg.com for
the latest color & sign offerings.
Clearance Required For Coolers (USA)
Sides* Top* Rear
Inches/mm Inches/mm Inches/mm
1 / 26 1 / 26 3 / 77
* GDM-5F-PT, GDM-7F & GDM-10F only.
KCL
24
3
/
4
"
24"
39
3
/
4
"
47
1
/
8
"
2
1
/
2
"
1
3
/
4
"
22
3
/
8
"
37
1
/
4
"
36
5
/
16
"
Door
Height
L - 61 cm
D - 63 cm
H - 101 cm
Door
Swing - 57 cm
L - 61 cm
D - 61 cm
H - 94 cm
Door
Swing (2) - 56 cm
26"
door size
24"
8
1
/
2
"
37"
24"
68"
22"
-
1
-
2
True Manufacturing GDM-23F Datasheet
- Type
- Datasheet
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
True Manufacturing GDM-5 Datasheet
-
-
-
-
-
-
-
-
-
Other documents
-
True GDT Series Technical & Service Manual
-
-
True Manufacturing Company TR2RRT-2S-2S User manual
-
True GDM-12 Installation guide
-
True T-12FG Installation guide
-
True Manufacturing Company T-23DT User manual
-
Norlake Refrigeration MF182 Datasheet
-
-
Grandstream UCM6300 Series IP PBX User guide
-