Kichler Lighting 49987DBK User manual

Brand: Kichler Lighting

Model: 49987DBK

Category: Wall & ceiling mounts accessories

Type: User manual

**Kichler Lighting 49987DBK **is a versatile and stylish lighting fixture that can be used in a variety of applications. With its classic black finish and clear glass shade, it is a perfect choice for both traditional and contemporary decors.

The fixture is easy to install and can be mounted on a post or ceiling. It uses a single bulb (not included) and is compatible with a variety of bulb types, including LED, CFL, and incandescent.

The Kichler Lighting 49987DBK is a great choice for illuminating any space, both indoors and outdoors.

The fixture is easy to install and can be mounted on a post or ceiling. It uses a single bulb (not included) and is compatible with a variety of bulb types, including LED, CFL, and incandescent.

The Kichler Lighting 49987DBK is a great choice for illuminating any space, both indoors and outdoors.

IS-49987-CB

We’re here to help 866-558-5706

Hrs: M-F 9am to 5pm EST

1) Slip xture over post and mark posion of mounng

holes in post.

2) Remove xture from post.

3) Drill 3/16” dia holes in post at posions marked .

4) Grounding instrucons: (See Illus. a or b).

a) On xtures where mounng strap is provided with a

hole and two raised dimples, wrap ground wire from

outlet box around green ground screw, and thread

into hole.

b) On xtures where a cupped washer is provided,

aach ground wire from outlet box under cupped

washer and green ground screw, and thread into

mounng strap.

If xture is provided with ground wire. Connect xture

ground wire to outlet box ground wire with wire

connector (Not provided) aer following the above steps.

Never connect ground wire to black or white power

supply wires.

5) Make wire connecon. Reference chart below for correct

connecons and wire accordingly.

Connect Black or Red

Supply Wire to:

Connect White Supply

Wire to:

Black White

*Parallel cord (round &

smooth)

*Parallel cord (square &

ridged)

Clear, Brown, Gold or

Black without Tracer

Clear, Brown, Gold or Black

with Tracer

Insulated wire (other

than green) with copper

conductor

Insulated wire (other

than green) with silver

conductor

*Note: When parallel wire (SPT

1 & SPT 2) are used. The neutral

wire is square shaped or ridged

and the other wire will be round

in shape or smooth (See illus.)

Neutral Wire

6) Slip xture[D] over post and secure in place using

provided mounng screws[A].

7) Insert recommended bulb[E] (Not supplied).

8) Lower the top[B] onto the xture using the two (2)

screws[C] and secure into place.

GREEN GROUND

SCREW

CUPPED

WASHER

OUTLET BOX

GROUND

FIXTURE

GROUND

DIMPLES

WIRE CONNECTOR

OUTLET BOX

GROUND

GREEN GROUND

SCREW

FIXTURE

GROUND

Fixture Diagram

Parts List

[A] Mounting

Screws

[B] Top

[C] Screws

[D] Fixture

[E] Bulb

Cauons

CAUTION – RISK OF SHOCK –

Disconnect Power at the main circuit breaker panel or main

fusebox before starng and during the installaon.

WARNING:

This xture is intended for installaon in accordance

with the Naonal Electrical Code (NEC) and all local code

specicaons. If you are not familiar with code requirements,

installaon by a cered electrician is recommended.

Installaon Instrucons

IS-49987-CB

Nous sommes là pour vous aider 866-558-5706

Heures : du lundi au vendredi, de 9h à 17h (heure de l’Est)

INSTRUCTIONS:

For Assembling and Installing Fixtures in Canada

Pour L’assemblage et L’installaon Au Canada

1) Passer le luminaire par dessus le support et marquer un

repère pour les trous de montage sur le support.

2) Enlever le luminaire du support.

3) Percer des trous de 1/8 po sur chacun des repères du

support.

4) Connecter les ls. Se reporter au tableau ci-dessous pour

faire les connexions.

Connecter le l noir ou

rouge de la boite

Connecter le l blanc de

la boîte

A Noir A Blanc

*Au cordon parallèle (rond

et lisse)

*Au cordon parallèle (à

angles droits el strié)

Au transparent, doré,

marron, ou noir sans l

disncf

Au transparent, doré,

marron, ou noir avec un l

disncf

Fil isolé (sauf l vert) avec

conducteur en cuivre

Fil isolé (sauf l vert) avec

conducteur en argent

*Remarque: Avec emploi d’un

l paralléle (SPT 1 et SPT 2). Le

l neutre est á angles droits ou

strié et l’autre l doit étre rond

ou lisse (Voir le schéma).

Fil Neutre

5) Faire glisser le luminaire[D] sur le support et xer à l’aide

des vis de montage[A].

6) Installer la ou les ampoules[E] recommandées (non

fournies).

7) Abaissez le couvercle [B] sur le luminaire et xez les

deux (2) vis [C].

Diagramme d’appareils

ATTENTION – RISQUE DE DÉCHARGES ÉLECTRIQUES -

Couper le courant au niveau du panneau du disjoncteur du

circuit principal ou de la boîte à fusibles principale avant de

procéder à l’installaon.

ATTENTION:

Ce luminaire doit être installé conformément aux codes

d’électricité naonaux (NEC) et sasfaire toutes les

spécicaons des codes locaux. Si vous ne connaissez pas

les exigences de ces codes, il est recommandé de coner

l’installaon à un électricien ceré.

Liste des Pièces

Précauons

[A] Vis de

Montage

[B] Couvercle

[C] Vis

[D] Luminaire

[E] Ampoules

Instrucons d’installaon

Kichler Lighting 49987DBK User manual

Brand: Kichler Lighting

Model: 49987DBK

Category: Wall & ceiling mounts accessories

Type: User manual

The fixture is easy to install and can be mounted on a post or ceiling. It uses a single bulb (not included) and is compatible with a variety of bulb types, including LED, CFL, and incandescent.

The Kichler Lighting 49987DBK is a great choice for illuminating any space, both indoors and outdoors.

Download PDF

report