IS-45648-US
We’re here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
1) Aach mounng strap[A] to outlet box[D] using the
strap mounng screws[E]. Mounng strap can be
adjusted to suit posion of xture.
2) Grounding instrucons: (See Illus. a or b).
a) On xtures where mounng strap is provided with a
hole and two raised dimples, wrap ground wire from
outlet box around green ground screw, and thread
into hole.
b) On xtures where a cupped washer is provided,
aach ground wire from outlet box under cupped
washer and green ground screw, and thread into
mounng strap.
If xture is provided with ground wire, connect xture
ground wire to outlet box ground wire with wire
connector aer following the above steps. Never connect
ground wire to black or white power supply wires.
GREEN GROUND
SCREW
CUPPED
WASHER
OUTLET BOX
GROUND
FIXTURE
GROUND
DIMPLES
WIRE CONNECTOR
OUTLET BOX
GROUND
GREEN GROUND
SCREW
FIXTURE
GROUND
a
b
Fixture Diagram
Parts List
Cauons
CAUTION – RISK OF SHOCK –
Disconnect Power at the main circuit breaker panel or main
fusebox before starng and during the installaon.
WARNING:
This xture is intended for installaon in accordance
with the Naonal Electrical Code (NEC) and all local code
specicaons. If you are not familiar with code requirements,
installaon by a cered electrician is recommended.
Installaon Instrucons
[A] Mounting
Strap
[B] Fixture
[C] Mounting
Screws
[D] Outlet Box
[E] Strap
Mounting
Screws
[F] Thumb Screw
[G] Glass
Cylinder
[H] Tube Cap
[I] Square End
Piece
3) Make wire connecons. Reference chart below for
correct connecons and wire accordingly.
Connect Black or Red
Supply Wire to:
Connect White Supply
Wire to:
Black White
*Parallel cord (round &
smooth)
*Parallel cord (square &
ridged)
Clear, Brown, Gold or
Black without Tracer
Clear, Brown, Gold or Black
with Tracer
Insulated wire (other
than green) with copper
conductor
Insulated wire (other
than green) with silver
conductor
*Note: When parallel wire (SPT
1 & SPT 2) are used. The neutral
wire is square shaped or ridged
and the other wire will be round
in shape or smooth (See illus.)
Neutral Wire
4) Push xture to wall in a horizontal posion. Make sure all
wires are inside canopy and do not get pinched between
canopy and wall.
5) Place the four (4) mounng screws[C] into the sides of
the xture and ghten to secure xture to wall.
6) Remove the thumb screw[F] from the end of the xture
and slide out the square end piece[I] and remove the
tube cap[H].
7) Insert recommended bulbs. (Not supplied).
8) Carefully slide the glass cylinder[G] over the end of the
xture unl seated against the tube cap.
9) Place the tube cap[H] onto the end of the installed
glass cylinder and slide in the square end piece[I] into
the open end of xture[B] up to the installed tube cap.
Secure into place with the thumb screw[F]. (DO NOT
over ghten).
Installaon Instrucons (connued)
D
E
A
C
B
G
H
F
I
Page is loading ...
IS-45648-CB
We’re here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
1) Aach mounng strap[A] to outlet box[D] using the
strap mounng screws[E]. Mounng strap can be
adjusted to suit posion of xture.
2) Grounding instrucons: (See Illus. a or b).
a) On xtures where mounng strap is provided with a
hole and two raised dimples, wrap ground wire from
outlet box around green ground screw, and thread
into hole.
b) On xtures where a cupped washer is provided,
aach ground wire from outlet box under cupped
washer and green ground screw, and thread into
mounng strap.
If xture is provided with ground wire, connect xture
ground wire to outlet box ground wire with wire
connector aer following the above steps. Never connect
ground wire to black or white power supply wires.
GREEN GROUND
SCREW
CUPPED
WASHER
OUTLET BOX
GROUND
FIXTURE
GROUND
DIMPLES
WIRE CONNECTOR
OUTLET BOX
GROUND
GREEN GROUND
SCREW
FIXTURE
GROUND
a
b
Fixture Diagram
Parts List
Cauons
CAUTION – RISK OF SHOCK –
Disconnect Power at the main circuit breaker panel or main
fusebox before starng and during the installaon.
WARNING:
This xture is intended for installaon in accordance
with the Naonal Electrical Code (NEC) and all local code
specicaons. If you are not familiar with code requirements,
installaon by a cered electrician is recommended.
Installaon Instrucons
[A] Mounting
Strap
[B] Fixture
[C] Mounting
Screws
[D] Outlet Box
[E] Strap
Mounting
Screws
[F] Thumb Screw
[G] Glass
Cylinder
[H] Tube Cap
[I] Square End
Piece
3) Make wire connecons. Reference chart below for
correct connecons and wire accordingly.
Connect Black or Red
Supply Wire to:
Connect White Supply
Wire to:
Black White
*Parallel cord (round &
smooth)
*Parallel cord (square &
ridged)
Clear, Brown, Gold or
Black without Tracer
Clear, Brown, Gold or Black
with Tracer
Insulated wire (other
than green) with copper
conductor
Insulated wire (other
than green) with silver
conductor
*Note: When parallel wire (SPT
1 & SPT 2) are used. The neutral
wire is square shaped or ridged
and the other wire will be round
in shape or smooth (See illus.)
Neutral Wire
4) Push xture to wall in a horizontal posion. Make sure all
wires are inside canopy and do not get pinched between
canopy and wall.
5) Place the four (4) mounng screws[C] into the sides of
the xture and ghten to secure xture to wall.
6) Remove the thumb screw[F] from the end of the xture
and slide out the square end piece[I] and remove the
tube cap[H].
7) Insert recommended bulbs. (Not supplied).
8) Carefully slide the glass cylinder[G] over the end of the
xture unl seated against the tube cap.
9) Place the tube cap[H] onto the end of the installed
glass cylinder and slide in the square end piece[I] into
the open end of xture[B] up to the installed tube cap.
Secure into place with the thumb screw[F]. (DO NOT
over ghten).
Installaon Instrucons (connued)
D
E
A
C
B
G
H
F
I
Page is loading ...
-
1
-
2
-
3
-
4
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
Related papers
-
Kichler Lighting 44070DBK User manual
-
Kichler Lighting 49909RZ User manual
-
Kichler Lighting 45874CLP User manual
-
Kichler Lighting 45873CLP User manual
-
Kichler Lighting 44263WWW User manual
-
Kichler Lighting 45872CLP User manual
-
Kichler Lighting 45871CLP User manual
-
Kichler Lighting 44091BK User manual
-
Kichler Lighting 44287WWW User manual
-
Kichler Lighting 49330RZ User manual
