Allen + Roth B10021 Installation guide

Brand: Allen + Roth

Model: B10021

Category: AV equipment stands

Type: Installation guide

Allen + Roth B10021 is a 3-light vanity bar fixture with a welcoming, sophisticated, and inspiring design. It's easy to install, with all parts included in the package, and can be used in various settings, such as bathrooms, powder rooms, and dressing areas. The fixture is dimmable, allowing you to adjust the brightness to your desired level, creating a perfect ambiance for any occasion. The durable construction ensures longevity, while the elegant finish adds a touch of style to your home décor.

Lowes.com/allenandroth

Serial Number Purchase Date

Questions, problems, missing parts? Before returning to your retailer, call our customer service

department at 1-866-439-9800, 8 a.m. – 6 p.m., EST, Monday - Thursday, 8 a.m. – 5 p.m., EST, Friday.

ATTACH YOUR RECEIPT HERE

AB15819

3-LIGHT VANITY BAR

Français p. 9

Español p. 17

ITEM #0759828

MODEL #B10021

welcoming • sophisticated • inspiring

allen + roth

is a registered trademark

Lowes.com/allenandroth

PACKAGE CONTENTS

A Fixture 1

Mounting Bracket 1

Glass Shade 3

Glass Holder (preassembled to Fixture (A)) 3

Socket (preassembled to Glass Holder (D)) 3

PART DESCRIPTION QUANTITY

Lowes.com/allenandroth

HARDWARE CONTENTS (shown actual size)

Wire

Connector

AA CC

Qty: 3

Threaded

Knob

Qty: 2

Long

Machine

Screw

Qty: 2

Short

Machine

Screw

Qty: 2

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the

product.

WARNING

• IMPORTANT: NEVER attempt any work without shutting off the electricity.

• Place the main power switch in the “OFF” position and unscrew the fuse(s), or switch “OFF” the

circuit breaker switch(es), that control the power to the fixture or room you are working in.

• Place the wall switch in the "OFF" position. If the fixture to be replaced has a switch or pull chain,

place it in the "OFF" position.

• Do not use bulbs with wattage greater than specified on this fixture.

• California Proposition 65

WARNING: This product can expose you to lead, which is known to the State of

California to cause cancer, birth defects or other reproductive harm. For more

information go to www.p65warnings.ca.gov

CAUTION

• If you have any doubts about how to install this lighting fixture, or if the fixture fails to operate

completely, please contact a licensed electrical contractor.

• All parts must be used as indicated in these instructions. Do not substitute any parts, leave parts

out, or use any parts that are worn out or broken. Failure to obey this instruction could invalidate

ETL listing and/or C.S.A. certification of this fixture.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package

contents list and hardware contents list. If any part is missing or damaged, do not attempt to

assemble the product.

Estimated assembly time: 30 minutes to 1 hour

Tools Required for Assembly (not included): Phillips screwdriver, flathead screwdriver, wire strippers,

electrical tape, ladder, safety glasses.

Lowes.com/allenandroth

ASSEMBLY INSTRUCTIONS

Hardware Used

x 3Wire Connector

2. Wire connection guide:

Ground wire:

• For installation in the United States: Wrap

ground wire from outlet box around ground

screw preassembed on mounting bracket (B)

no less than 2 in. from wire end. Tighten

ground screw. If fixture is supplied with a

ground wire, connect to outlet ground wire

with a wire connector (AA).

• For installation in Canada: If fixture is

supplied with ground wire, wrap ground wire

around ground screw on mounting bracket

(B). Tighten ground screw. Connect fixture

ground wire to outlet ground wire with the

wire connector (AA).

Supply wires:

• Connect the Neutral (White) supply wire from

the outlet box to the Neutral fixture wire

(White or Parallel Cord “D” shaped and

ribbed).

• Connect the Hot (Black) supply wire from the

outlet box to the Hot fixture wire (Black or

Parallel Cord round and smooth).

NOTE:

Fixture wires will either be:

• Black and White.

• Parallel Cord SPT-1 lamp wire with one

round smooth wire and one “D” shaped

ribbed wire.

BARE COPPER,

OR GREEN

GROUND

SUPPLY WIRE

BARE COPPER,

OR GREEN

GROUND

FIXTURE

WIRE

BLACK FIXTURE

WIRE

WHITE FIXTURE

WIRE

BLACK SUPPLY

WIRE

BLACK SUPPLY

WIRE

PARALLEL

FIXTURE CORD

(ROUND AND

SMOOTH)

PARALLEL FIXTURE

CORD (“D” SHAPED

AND RIDGED

)

WHITE SUPPLY

WIRE

WHITE SUPPLY

WIRE

Outlet Box

Short Machine

Screw

Long Machine

Screw

x 2

Hardware Used

1. Orient the mounting bracket (B) so the raised

center portion protrudes into the outlet box (not

included). Insert long machine screws (DD)

through mounting bracket (B) so the long

machine screws (DD) protrude outward.

Connect the mounting bracket (B) to the outlet

box with short machine screws (BB).

Lowes.com/allenandroth

ASSEMBLY INSTRUCTIONS

x 2

Threaded

Knob

Hardware Used

3. Pass fixture (A) over the long machine

screws (DD) protruding from the mounting

bracket (B) and secure with threaded

knobs (CC).

Insert 60-watt max. medium-base

incandescent bulbs or CFL/LED equivalent

(none included) into sockets (E).

Lowes.com/allenandroth

ASSEMBLY INSTRUCTIONS

TROUBLESHOOTING

Fixture does not light. 1. Fixture may be wired incorrectly.

1. Check wiring.

2. Worn or broken bulb. 2. Replace bulb.

1. Check wiring.

PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION

• Always be certain that electric current is turned off before cleaning this item.

• Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on

fixture, as it will damage the metal finish.

• All glass shades may be washed in a towel-lined sink with warm water and mild soap. Do not

wash shades in an automatic dishwasher.

CARE AND MAINTENANCE

Screw glass shades (C) into glass holders

(D).

Lowes.com/allenandroth

WARRANTY

The Distributor warrants that its products will be free from defects in material and workmanship for

one (1) year from the date of purchase by the Original Purchaser.

To replace a product that has a warranted defect, the Original Purchaser shall return any allegedly

defective parts or products to the authorized Distributor the product was purchased from with PROOF

OF PURCHASE, Original Purchaser’s name and return address and a description of the claimed

product defect.

If any of the warranted products are found by Distributor, in its sole discretion, to be defective, such

products will, at Distributor’s sole option and cost, be replaced, repaired or refunded less an amount

directly attributable to Original Purchaser’s prior use of the product. Distributor will return the repaired

or replaced product prepaid freight. This warranty does not cover labor or other costs or expenses to

remove or install any defective, repaired or replaced product.

The parties hereto expressly agree that Original Purchaser’s sole and exclusive remedy against

Distributor shall be for the repair, replacement or refund of defective products as provided herein.

This warranty extends only to product ownership by the Original Purchaser; is not transferable

whether to heirs, subsequent owners, or otherwise; and is void if the Original Purchaser ceases to

own the product.

This warranty does not apply to any products that have been subjected to misuse, mishandling,

misapplication, connected to voltage at more than 5% above standard North American voltage,

unusual use (including but not limited to use in an environment where the annual average ambient

operating temperature is below 27ºF or above 95ºF), neglect (including but not limited to improper

maintenance), accident, acts of god such as high winds, improper installation or care, failure to follow

the Product’s written instructions for normal use and care, improper packaging of products returned to

the Distributor, modification (including but not limited to use of unauthorized parts or attachments), or

adjustment or repair. Significant product exposure to chemicals, harsh cleaners, salt water or salt air

will void any and all warranties on exterior finishes. This warranty only applies when all components,

including transformers, have been provided by the Distributor. Substituting another manufacturer’s

product and/or components will render the warranty completely void.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER

RIGHTS WHICH VARY FROM STATE TO STATE. SOME STATES DO NOT ALLOW LIMITATIONS

ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF

INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATIONS OR EXCLUSIONS

MAY NOT APPLY TO YOU.

THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR

IMPLIED, INCLUDING THOSE OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR

PURPOSE OR INFRINGEMENT. ORIGINAL PURCHASER SHALL IN NO EVENT BE ENTITLED

TO, AND THE DISTRIBUTOR SHALL NOT BE LIABLE FOR, INDIRECT, SPECIAL, INCIDENTAL OR

CONSEQUENTIAL DAMAGES OF ANY NATURE, INCLUDING, BUT NOT LIMITED TO LOSS OF

PROFIT, PROMOTIONAL AND/OR MANUFACTURING EXPENSES, OVERHEAD, INJURY TO

REPUTATION AND/OR LOSS OF CUSTOMERS.

Lowes.com/allenandroth

REPLACEMENT PARTS LIST

For replacement parts, call our customer service department at 1-866-439-9800, 8 a.m. – 6 p.m.,

EST, Monday - Thursday, 8 a.m. – 5 p.m., EST, Friday.

Rev. 05-30-18

Printed in China

allen + roth

is a registered trademark

Mounting Bracket XBAR05

Glass Shade GSB10005

Wire Connector WC001

Short Machine Screw SCR832X050

Threaded Knob TK1X832-BN

Long Machine Screw SCR832X150

PART DESCRIPTION PART #

Page is loading ...

Allen + Roth B10021 Installation guide

Brand: Allen + Roth

Model: B10021

Category: AV equipment stands

Type: Installation guide

Download PDF

report

in other languages

français: Allen + Roth B10021 Guide d'installation
español: Allen + Roth B10021 Guía de instalación

Allen + Roth B10021 Installation guide

Allen + Roth B10021 Installation guide

in other languages

Related papers

Other documents