safetrust 8845-000 User guide

8845-000
Brand
safetrust
Model
8845-000
Type
User guide

This manual is also suitable for

Below you will find brief information for IoT Sensor Mini Mullion 8845-000. This guide provides instructions for the installation, configuration and testing of the Safetrust IoT Sensor Mini Mullion. The guide includes steps for mounting the device, connecting the wires, using the Safetrust Wallet app to manage the sensor, and verifying the device functionality with both cards and mobile access.

Below you will find brief information for IoT Sensor Mini Mullion 8845-000. This guide provides instructions for the installation, configuration and testing of the Safetrust IoT Sensor Mini Mullion. The guide includes steps for mounting the device, connecting the wires, using the Safetrust Wallet app to manage the sensor, and verifying the device functionality with both cards and mobile access.

8845-000 Quickstart Guide
Last Updated: March 2022
Contents
Safetrust Inc. | safetrust.com
sales@safetrust.com
In the box
What you'll need
Installation
Configuration
Testing
Regulatory
Support
01
02
03
04
05
06
07
01
Safetrust Inc. | safetrust.com
sales@safetrust.com
In the box
Safetrust Inc. | safetrust.com
sales@safetrust.com
Nylon wall plugs
Used to brace the
screws inside the wall
#6-32 x .375” spanner
security screw
Option 1: Secures the top
and bottom casing together
#6-32 x .375” phillips
flat head screw
Option 2: Secures the top
and bottom casing together
Sheet metal screw
SCR PTP, 2X6MM BLUE, ZINC CR3
For mounting to wall
02
Safetrust Inc. | safetrust.com
sales@safetrust.com
What you'll need
A working internet connection
Cable, 5-12 conductor (Wiegand), 4 conductor Twisted Pair Over-All Shield and
UL approved, Belden3107A or equivalent (OSDP)
Linear DC power supply
Metal or plastic junction box
Drill with various bits for mounting hardware
Safetrust Inc. | safetrust.com
sales@safetrust.com
03
Safetrust Inc. | safetrust.com
sales@safetrust.com
Installation
Safetrust Inc. | safetrust.com
sales@safetrust.com
For a wall mounted installation, begin by pre-drilling your holes and insert the nylon
screw plugs provided to support the weight of the reader. Once secured to the
wall, you can fix the black plate to the wall using the screws (SCR PTP, 2X6MM
BLUE, ZINC CR3) provided.
Safetrust Inc. | safetrust.com
sales@safetrust.com
The next step is to connect the wires as per the wiring table above.
Ground
Relay In
Relay Out
Red LED
Tamper
Green LED
Wiegand D0/Data
Wiegand D1/Clock/F2F
12VDC
OSDP (RS-485A) Wiegand D0
OSDP (RS-485B) Wiegand D1
Beeper
Black
Grey
Blue
Brown
Purple
Orange
Green
White
Red
Aqua
Pink
Yellow
Wire Colors
Safetrust Inc. | safetrust.com
sales@safetrust.com
Once the back plate has been fitted and the wiring is complete, the top casing can
be inserted onto the bottom casing like shown above.
Safetrust Inc. | safetrust.com
sales@safetrust.com
Complete the hardware installation by fixing either the snake eye screw (SMF #6-
32X5/16" SS) or a Phillips screw (SMF #6-32X5/16" SS) to bottom casing.
04
Safetrust Inc. | safetrust.com
sales@safetrust.com
Configuration
Safetrust Inc. | safetrust.com
sales@safetrust.com
Open the Safetrust Wallet APP and select Manage Sensor tab. Make sure your
system admin has set you up with this role.
Safetrust Inc. | safetrust.com
sales@safetrust.com
With the Admin Installer tab open from the App, bring the phone in range of the IoT
Sensor and once visible from the App, highlight and select “Configure”.
Safetrust Inc. | safetrust.com
sales@safetrust.com
• Choose an Identity System.
• Specify the Type of access from the dropdown (eg. Door, Gate etc.)
• Assign a short Name and Description using alphanumeric characters.
• Choose an Output for the sensor (the default is set to Wiegand).
Safetrust Inc. | safetrust.com
sales@safetrust.com
When the IoT Sensor information is saved successfully to Credential Manager and
assigned to the Identity System, the new description will appear in the Manage
Sensor tab with a unique serial number assigned.
05
Safetrust Inc. | safetrust.com
sales@safetrust.com
Testing
Safetrust Inc. | safetrust.com
sales@safetrust.com
LED Ring
Status LED
Solid red
Indicates idle mode
Flashing red
Powering up
Solid green
Success
Flashing green
Credential is read and
access is granted
Access with cards
Safetrust Inc. | safetrust.com
sales@safetrust.com
LED Ring
Status LED
Solid red
Indicates idle mode
Flashing red
Powering up
Solid Blue
Success
Flashing Blue
Credential is read and
access is granted
Access with mobile
06
Safetrust Inc. | safetrust.com
sales@safetrust.com
Regulatory
Information
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23

safetrust 8845-000 User guide

8845-000
Brand
safetrust
Model
8845-000
Type
User guide
This manual is also suitable for

Below you will find brief information for IoT Sensor Mini Mullion 8845-000. This guide provides instructions for the installation, configuration and testing of the Safetrust IoT Sensor Mini Mullion. The guide includes steps for mounting the device, connecting the wires, using the Safetrust Wallet app to manage the sensor, and verifying the device functionality with both cards and mobile access.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents