SMART Technologies Board 3000i Installation guide
- Type
- Installation guide
Unpacking Instructions
99-00063-05 Rev B0
emove the shipping brackets that hold the cabinet to the pallet
1. Remove the bolts.
2. Remove the wood blocks (some SMART Board™ 3000i interactive whiteboard models only).
3. Rotate the brackets 90° and down, and then remove them from the cabinet.
oll the cabinet down the ramp. We recommend that two people perform this task.
To r
4. the casters, and then r
5. Refer to the Rear Projection SMART Board 3000i Interactive Whiteboard Installation Guide in the accessory box inside the cabinet for
further installation instructions.
Unlock
TM
Unpacking the Rear Projection SMART Board Interactive Whiteboard
Remove the wood
blocks before rolling the
cabinet off the pallet.
© 2003–2008 SMART Technologies ULC. All rights reserved. SMART Board and the SMART logo are trademarks or registered trademarks of SMART Technologies ULC in the U.S. and/or other
countries. All other third-party product and company names may be trademarks of their respective owners.
01/2008
Patent No.
. Other patents pending.
US5448263; US6141000; US6326954; US6337681; US6741267; US6747636;
US6803906; US6919880; US6947032; US6954197; US6972401; US7151533; US7184030; US7236162; US7289113; CA2058219; CA2453873; EP1297488; ES2279823; CN1310126; and
DE60124549 Contents are subject to change without notice.
Remove the plastic bag and/or the plastic shrink wrap around the cabinet.
-
1
SMART Technologies Board 3000i Installation guide
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
SMART Technologies SMART Board 3000i Installation guide
-
-
-
-
-
-
-
-
-
