Waterpik waterflosser 500 Series Quick start guide

Waterpik
Brand
Waterpik
Model
waterflosser 500 Series
Category
Teeth care
Type
Quick start guide
This device is only compatible with voltages of 100-240 VAC, 50/60Hz
©2018 Water Pik, Inc.
Unit Prep
1
Cordless Advanced 500 Series
QUICK START GUIDE
A. Charge unit for 4 hours
by placing the magnetic
charger on the front of
the unit.
B. Insert tip until it clicks
into place. To remove tip,
push the tip eject button.
C. Lift the flip top on reservoir
and fill with warm water.
Refill as needed.
Insert
Magnetic
Attachment
Caution:
Do not press tip
eject button while
unit is running.
Fill
This device is only compatible with voltages of 100-240 VAC, 50/60Hz
©2018 Water Pik, Inc.
Unit Prep
1
Cordless Advanced 500 Series
QUICK START GUIDE
A. Charge unit for 4 hours
by placing the magnetic
charger on the front of
the unit.
B. Insert tip until it clicks
into place. To remove tip,
push the tip eject button.
C. Lift the flip top on reservoir
and fill with warm water.
Refill as needed.
Insert
Magnetic
Attachment
Caution:
Do not press tip
eject button while
unit is running.
Fill
TO AVOID MESS: KEEP TIP IN MOUTH WHILE UNIT IS ON.
FN 20020388-F AA
MOD
E
HIGH
LOW
MEDIUM
Water Floss
2
Cordless Advanced 500 Series
QUICK START GUIDE
A. Press mode button to
adjust pressure. Start on
low pressure and increase
to your liking.
B. Turn power ON. Close
lips enough to prevent
splashing. Keep unit upright
during use to ensure
continuous water flow.
C. Aim water at the gumline
at a 90 degree angle. Follow
the gumline and pause
briefly between teeth.
Mode
  • Page 1 1
  • Page 2 2

Waterpik waterflosser 500 Series Quick start guide

Waterpik
Brand
Waterpik
Model
waterflosser 500 Series
Category
Teeth care
Type
Quick start guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents