Golden Lighting 1025-BA1 CH Installation guide

Brand: Golden Lighting

Model: 1025-BA1 CH

Type: Installation guide

IMPORTANT:

• ALLINSTALLATIONWORKSHOULDBEDONEBYACCREDITEDPROFESSIONAL.

• SHUTOFFPOWERSUPPLYATFUSEORCIRCUITBREAKER!

• USEONLYTHESPECIFIEDBULBS.DONOTEXCEEDTHEMAXIMUMWATTAGE!

FINISHING THE INSTALLATION

3.Placethexture’sbackplate(F)overmountingstrap(B)sothatthekeyholesinthetopofmountingstrap(A)lineupwiththeholesin

backplate(B).Threadscrews(F)intotheholes.

4.Installlightbulb(J-provided)inaccordancewiththexture’sspecications.Donotexceedthemaximumrecommendedwattage.

BulbNote:Useatissueorpapertoweltoholdthebulbandpushdownintothesocket.Oilsanddirtcancausethebulblifetoshorten.

Rubbingalcoholisrecommendedtocleanthebulbswhenneeded.

5.Crystals(I)areinstalled,butifonecomesoff,pleaserefertothediagramaboveofthecrystalinstallation.

Yourinstallationisnowcomplete.Turnonthepowerandtestthexture.

For Customer Service, contact

the place of purchase.

AssemblyInstructions:1025-BA1 (Krysta)

CLEANING TIPS

Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the

xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.

PREPARING FOR INSTALLATION

Removeallofthecontentsfromthecarton.Seetheimportantnotesabove.Removetheoldxturefromthewall,includingtheold

mountingstrap.

1.Takethemountingstrapassemblyfromthepartsbag.Mountingstrap(B)containsthreadedholes.Lineuptheholesin

backplate(F)withtheholesinmountingstrap(B)andsecuremountingstrap(B)tothejunctionboxwithmountingscrews(D)anda

screwdriver.Tightenthescrewssecurely.

CONNECTING THE WIRES

2.Haveanassistantsupportthexture’sweightwhilecompletingthewiring.Refertothewiringdiagrambelowandattachthexture’s

wirestothepowersupplywiresfromthejunctionbox.ConnectHottoHot,NeutraltoNeutral,andGroundtoGround.Twisttheends

ofthewirepairstogether,andthentwistonawireconnector.Makesurealltwistsareinthesamedirection.Ifthereisnohouseground

wirecomingfromthejunctionbox,locategroundscrew(E)onthemountingbracket/mountingstrapandwrapthexture’sground

wirearoundthegroundscrew.Useascrewdrivertotightenthetopofgroundscrew(E)ontothewiresandintothemountingbracket/

mountingstrap.Tuckthewiresintothejunctionbox.

How to Identify the Fixture’s Wires

Hot Neutral Ground

Smooth

Ribbed

Bare Metal,

Green, or

Green Inner

Thread

Black

White

Black Inner

Thread

White Inner

Thread

House Wires

Fixture Wires

Hot

1025-BA1 CH

Golden Lighting 1025-BA1 CH Installation guide

Golden Lighting 1025-BA1 CH Installation guide

Golden Lighting 1025-BA1 CH Installation guide

Related papers

Other documents