2. Golden Lighting
  3. 1025-BA2 CH

Golden Lighting 1025-BA2 CH Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Golden Lighting 1025-BA2 CH Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
IMPORTANT:
• ALLINSTALLATIONWORKSHOULDBEDONEBYACCREDITEDPROFESSIONAL.
• SHUTOFFPOWERSUPPLYATFUSEORCIRCUITBREAKER!
• USEONLYTHESPECIFIEDBULBS.DONOTEXCEEDTHEMAXIMUMWATTAGE!
For Customer Service, contact
the place of purchase.
AssemblyInstructions:1025-BA2, BA3, BA4 (Krysta)
CLEANING TIPS
Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the
xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.
F
E
A
G
B
D
I
J
C
H
FINISHING THE INSTALLATION
3.Placethexture’sbackplate(F)overmountingstrap(B)sothatthekeyholesinthetopofmountingstrap(A)lineupwiththeholesin
backplate(B).Threadscrews(F)intotheholes.
4.Installlightbulb(J-provided)inaccordancewiththexture’sspecications.Donotexceedthemaximumrecommendedwattage.
BulbNote:Useatissueorpapertoweltoholdthebulbandpushdownintothesocket.Oilsanddirtcancausethebulblifetoshorten.
Rubbingalcoholisrecommendedtocleanthebulbswhenneeded.
5.Crystals(I)areinstalled,butifonecomesoff,pleaserefertothediagramaboveofthecrystalinstallation.
Yourinstallationisnowcomplete.Turnonthepowerandtestthexture.
PREPARING FOR INSTALLATION
Removeallofthecontentsfromthecarton.Seetheimportantnotesabove.Removetheoldxturefromthewall,includingtheold
mountingstrap.
1.Takethemountingstrapassemblyfromthepartsbag.Mountingstrap(B)containsthreadedholes.Lineuptheholesin
backplate(F)withtheholesinmountingstrap(B)andsecuremountingstrap(B)tothejunctionboxwithmountingscrews(D)anda
screwdriver.Tightenthescrewssecurely.
CONNECTING THE WIRES
2.Haveanassistantsupportthexture’sweightwhilecompletingthewiring.Refertothewiringdiagrambelowandattachthexture’s
wirestothepowersupplywiresfromthejunctionbox.ConnectHottoHot,NeutraltoNeutral,andGroundtoGround.Twisttheends
ofthewirepairstogether,andthentwistonawireconnector.Makesurealltwistsareinthesamedirection.Ifthereisnohouseground
wirecomingfromthejunctionbox,locategroundscrew(E)onthemountingbracket/mountingstrapandwrapthexture’sground
wirearoundthegroundscrew.Useascrewdrivertotightenthetopofgroundscrew(E)ontothewiresandintothemountingbracket/
mountingstrap.Tuckthewiresintothejunctionbox.
House Wires
Fixture Wires
Hot
How to Identify the Fixture’s Wires
Hot Neutral Ground
Smooth
Ribbed
Bare Metal,
Green, or
Green Inner
Thread
Black
White
Black Inner
Thread
White Inner
Thread
1025-BA4
1025-BA2
1025-BA3
/