2. Toro
  3. Auxiliary Valve Kit, RT600 Traction Unit

Toro Auxiliary Valve Kit, RT600 Traction Unit Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Auxiliary Valve Kit, RT600 Traction Unit Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3388-147RevA
AuxiliaryValveKit
RT600TractionUnit
ModelNo.25445
InstallationInstructions
Safety
WARNING
CALIFORNIA
Proposition65Warning
Thisproductcontainsachemicalorchemicals
knowntotheStateofCaliforniatocausecancer,
birthdefects,orreproductiveharm.
SafetyandInstructional
Decals
Safetydecalsandinstructionsareeasily
visibletotheoperatorandarelocatednear
anyareaofpotentialdanger.Replaceany
decalthatisdamagedorlost.
125-6696
1.Rotatecounterclockwise4.Moveright
2.Rotateclockwise5.Lowertheguard
3.Moveleft
6.Raisetheguard
©2014—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3388-147*A
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
Description
Qty.
Use
Nopartsrequired
–
Preparethemachine.
Auxiliaryvalve1
Bracket1
Bolts(M8)
3
90-degreetting(1/2-inchmale,5/8-inch
male)
2
Installtheauxiliaryvalve.
Cover
1
Clipnut
3
Bolts(M6)
3
90-degreetting(5/8-inchmale,male)
2
90-degreetting(5/8-inchmale,5/8-inch
female)
1
Teetting
1
Hydraulichose(30inches)
1
Directionalvalveassembly1
Bolts(5/16inch)
2
Washer2
Installthedirectionalvalvecoverandassembly.
ShortHydraulictube
1
Longhydraulictube1
Hydraulichose(24inches)
1
90-degreetting(5/8-inchmale,3/4-inch
female)
2
Decal1
Cableties
2
Installthehydraulichosesandthedecal.
PreparingtheMachine
1.Movethemachinetoalevelsurface.
2.Settheparkingbrakeandlowertheattachmentsto
theground.
3.Shutoffthemachineandremovethekey.
4.Removetheboltsandcoverfromtheexistingbulkhead
mountasshowninFigure1.
g027024
2
1
Figure1
1.Bolts
2.Cover
2
InstallingtheAuxiliaryValve
1.Applythread-lockingadhesivetothe3bolts(M8)and
securetheauxiliaryvalvetothebracketasshownin
Figure2.
Figure2
1.90-degreettings3.Bolts(M8)
2.Bracket
2.Installthe2ttings(90degree,1/2-inchmale,5/8-inch
male)ontothevalveasshowninFigure2.
Note:Ensurethatthettingontherightsideis
turned25degrees.
3.Removethebolts,washers,andnutssecuringthelower
rightsidepaneltotheROPS(Figure3).
Figure3
4.SecuretheauxiliaryvalveassemblytotheROPSusing
thebolts,washers,andnutsremovedintheprevious
stepasshowninFigure3.
InstallingtheDirectionalValve
CoverandAssembly
1.Installthe3clipnutsontothenewcoverassemblyas
showninFigure4.
Figure4
1.Bolts(M6)3.Cover
2.Clipnuts
2.Applythread-lockingadhesivetothe3bolts(M6)and
securethecovertothebulkheadmountasshownin
Figure4.
3.Installbothofthe90-degreettings(5/8-inchmale,
male),theTeetting,andthe90-degreetting
(5/8-inchmale,5/8-inchfemale)ontothedirectional
valveasshowninFigure5.
Figure5
1.90-degreetting(5/8-inch
male,5/8-inchmale)
4.Valvenut
2.90-degreetting(5/8-inch
male,5/8-inchfemale)
5.Coil
3.Teetting6.90-degreetting(5/8-inch
male,male)
4.Torquethettingsto142to162N-m(105to120ft-lb).
5.Installthe30-inchhoseontothelower90-degree
tting(5/8-inchmale,male)(Figure5).
6.Loosenthevalvenutandrotatethecoilonthe
directionalvalve180degrees(Figure5).
3
7.Torquethevalvenutto142to162N-m(105to120
ft-lb).
8.Applythread-lockingadhesivetothe2bolts(5/16
inch)andlooselysecurethedirectionalvalveassembly
tothecoverusingthe2bolts,and2washersasshown
inFigure6.
Note:Makesurethatport2isshowingontopofthe
valve.
Figure6
1.Bolts(5/16inch)3.Valvettingcover
2.Washers
9.Removethevalvettingcovercurrentlyinstalledon
thebulkheadasshowninFigure6.
InstallingtheHydraulicHoses
andtheDecal
1.Installthelonghydraulictubefromtheteettingto
thefurthest90degreettingonthebulkheadassembly
asshowninFigure7.
Figure7
1.Longhydraulictube
3.Shorthydraulictube
2.90-degreetting(5/8inch
male,3/4inchfemale)
2.Installtheshorthydraulictubefromthe90-degree
ttingontopofthedirectionalvalveassemblytothe
closest90-degreettingonthebulkheadassemblyas
showninFigure7.
3.Connectthe30-inchhose,previouslyinstalledonthe
bottomofthedirectionalvalveassembly,totheoutside
90-degreettingontheauxiliaryvalveasshownin
Figure8.
Figure8
1.Hydraulichose(30inches)3.Hydraulichose(24inches)
2.90-degreetting(5/8male,
female)
4.Installthe24-inchhosefromtheinnermost90-degree
ttingtothe90-degreettingontheteevalve
connectedtothedirectionalvalveassemblyasshown
inFigure8.
5.Securethehosestogetherwiththe2cableties.
6.Tightentheboltssecuringthedirectionalvalve
assemblytothecover(Figure6).
7.InstallthedecalasshowninFigure9.
1
g027031
Figure9
1.Decal
4
/