LBL Lighting HW936MOSC2G60 Installation guide

LBL Lighting
Brand
LBL Lighting
Model
HW936MOSC2G60
Category
Wall & ceiling mounts accessories
Type
Installation guide
Installation Instructions for
Monty Wall
1.9
HW936_SC2G60
980MONTYW
GP I :ENERAL RODUCT NFORMATION
This product can mount to either a 4" square electrical box with
round plaster ring or an octagon electrical box.
This product is suitable for damp locations.
This product can be dimmed with a standard incandescent dimmer.
Feed the fixture wires through the mounting plate side hole.
Connect the crossbar to a suitable ground in accordance with
local electrical codes.
Connect the fixture white wire to the neutral power line wire
with a wire nut.
Connect the fixture black wire to the hot power line wire with
a wire nut.
FIXTURE WIRES
GROUND WIRE SCREW
1
MOUNTING PLATE
Install the Fixture
Mount the crossbar assembly to the electrical box holes with
the two #8-32 screws provided.
CROSSBAR
ASSEMBLY
ELECTRICAL BOX HOLE
#8-32 SCREW
1A
1
1 1
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
Wall
1B
2
3
4
5
2
5
4
3
1C
2A
MOUNTING PLATE
Place all wires and wire nut connections properly inside the
electrical box.
Slide the mounting plate center hole onto the exposed
threaded nipple. Secure the mounting plate in place by
tightening the cap to threaded nipple.
CAP
LAMP
SOCKET
2
CROSSBAR
EXPOSED THREADED
NIPPLE
GLASS SHADE
Place the glass shade onto the mounting plate. Align the glass
shade holes with the mounting plate holes. Tighten the thumb
screws to secure the glass shade in place.
THUMB
SCREW
MOUNTING
PLATE
NOTE: Do not over tighten the thumb screws which may
cause the glass shade to break.
Push the lamp pins completely into the socket holes.
NOTE: Use only your fingers and a soft cloth to install
the lamp.
Use 120 Volt, Watt Type T4,MAX 60
G9 Base, Bi-Pin Halogen Lamp.
SAVETHESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
6
7
1
7
2B
2
2 2
Install the Lamp & Shade
  • Page 1 1
  • Page 2 2

LBL Lighting HW936MOSC2G60 Installation guide

LBL Lighting
Brand
LBL Lighting
Model
HW936MOSC2G60
Category
Wall & ceiling mounts accessories
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents