IBM RELEASE 7.3 User manual

Category
Software
Type
User manual

This manual is also suitable for

HPSS
Management
Guide
High Performance Storage System
Release 7.3
November 2009 (Revision 1.0)
HPSS Management Guide November 2009
Release 7.3 (Revision 1.0) 1
© Copyright (C) 1992, 2009 International Business Machines Corporation, The Regents of the University of
California, Los Alamos National Security, LLC, Lawrence Livermore National Security, LLC, Sandia Corporation,
and UT-Battelle.
All rights reserved.
Portions of this work were produced by Lawrence Livermore National Security, LLC, Lawrence Livermore National
Laboratory (LLNL) under Contract No. DE-AC52-07NA27344 with the U.S. Department of Energy (DOE); by the
University of California, Lawrence Berkeley National Laboratory (LBNL) under Contract No. DE-AC02-
05CH11231 with DOE; by Los Alamos National Security, LLC, Los Alamos National Laboratory (LANL) under
Contract No. DE-AC52-06NA25396 with DOE; by Sandia Corporation, Sandia National Laboratories (SNL) under
Contract No. DE-AC04-94AL85000 with DOE; and by UT-Battelle, Oak Ridge National Laboratory (ORNL) under
Contract No. DE-AC05-00OR22725 with DOE. The U.S. Government has certain reserved rights under its prime
contracts with the Laboratories.
DISCLAIMER
Portions of this software were sponsored by an agency of the United States Government. Neither the United States,
DOE, The Regents of the University of California, Los Alamos National Security, LLC, Lawrence Livermore
National Security, LLC, Sandia Corporation, UT-Battelle, nor any of their employees, makes any warranty, express
or implied, or assumes any liability or responsibility for the accuracy, completeness, or usefulness of any
information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned
rights.
Printed in the United States of America.
HPSS Release 7.3
November 2009 (Revision 1.0)
High Performance Storage System is a trademark of International Business Machines Corporation.
IBM is a registered trademark of International Business Machines Corporation.
IBM, DB2, DB2 Universal Database, AIX, RISC/6000, pSeries, and xSeries are trademarks or registered trademarks
of International Business Machines Corporation.
UNIX is a registered trademark of the Open Group.
Linux is a registered trademark of Linus Torvalds in the United States and other countries.
Kerberos is a trademark of the Massachusetts Institute of Technology.
Java is a registered trademark of Sun Microsystems, Incorporated in the United States and other countries.
ACSLS is a trademark of Sun Microsystems, Incorporated.
Microsoft Windows is a registered trademark of Microsoft Corporation.
NFS, Network File System, and ACSLS are trademarks of Sun Microsystems, Inc.
DST is a trademark of Ampex Systems Corporation.
Other brands and product names appearing herein may be trademarks or registered trademarks of third parties.
HPSS Management Guide November 2009
Release 7.3 (Revision 1.0) 2
Table of Contents
Chapter 1. HPSS 7.1 Configuration Overview.....................................................................................15
1.1. Introduction...................................................................................................................................15
1.2. Starting the SSM GUI for the First Time.......................................................................................15
1.3. HPSS Configuration Roadmap (New HPSS Sites)........................................................................15
1.4. Initial HPSS Startup Roadmap (All Sites).....................................................................................16
1.5. Additional Configuration Roadmap (All Sites).............................................................................17
1.6. Verification Checklists (All Sites).................................................................................................17
1.6.1. Configuration Checklists.........................................................................................................................17
1.6.2. Operational Checklists.............................................................................................................................19
1.6.3. Performance Checklist.............................................................................................................................20
Chapter 2. Security and System Access................................................................................................21
2.1. Security Services...........................................................................................................................21
2.1.1. Security Services Configuration..............................................................................................................21
2.1.2. Security Mechanisms...............................................................................................................................22
2.1.2.1. UNIX...............................................................................................................................................22
2.1.2.2. Kerberos 5.......................................................................................................................................22
2.1.2.3. LDAP..............................................................................................................................................23
2.1.2.3.1. LDAP Administrative Tasks..................................................................................................23
2.2. HPSS Server Security ACLs..........................................................................................................25
2.3. SSM User Security........................................................................................................................26
2.4. Location Policy..............................................................................................................................26
2.4.1. Configuring/Updating a Location Policy.................................................................................................27
2.4.2. Location Policy Configuration Window..................................................................................................27
2.4.3. Deleting a Location Policy......................................................................................................................28
2.5. Restricting user access to HPSS. ..................................................................................................28
2.5.1. Restricted Users Window........................................................................................................................29
Chapter 3. Using SSM............................................................................................................................31
3.1. The SSM System Manager............................................................................................................31
3.1.1. Starting the SSM System Manager..........................................................................................................31
3.1.2. Tuning the System Manager RPC Thread Pool and Request Queue Sizes.............................................31
3.1.3. Labeling the System Manager RPC Program Number ...........................................................................32
3.2. Quick Startup of hpssgui...............................................................................................................33
3.3. Configuration and Startup of hpssgui and hpssadm.......................................................................34
3.3.1. Configuring the System Manager Authentication for SSM Clients.........................................................35
3.3.2. Creating the SSM User Accounts............................................................................................................35
3.3.2.1. The hpssuser Utility........................................................................................................................35
3.3.2.2. SSM User Authorization.................................................................................................................36
3.3.2.3. User Keytabs (For Use with hpssadm Only)...................................................................................37
3.3.2.3.1. Keytabs for Kerberos Authentication: hpss_krb5_keytab......................................................38
3.3.2.3.2. Keytabs for UNIX Authentication: hpss_unix_keytab...........................................................38
3.3.3. SSM Configuration File...........................................................................................................................39
HPSS Management Guide November 2009
Release 7.3 (Revision 1.0) 3
3.3.3.1. login.conf........................................................................................................................................41
3.3.3.2. krb5.conf (For Use with Kerberos Authentication Only)................................................................41
3.3.4. SSM Help Files (Optional)......................................................................................................................42
3.3.5. SSM Desktop Client Packaging...............................................................................................................42
3.3.5.1. Automatic SSM Client Packaging and Installation.........................................................................43
3.3.5.2. Manual SSM Client Packaging and Installation..............................................................................43
3.3.6. Using SSM Through a Firewall...............................................................................................................44
3.3.6.1. The Firewall Problem......................................................................................................................44
3.3.6.2. Solutions for Operating Through a Firewall..................................................................................45
3.3.6.3. Example: Using hpssgui Through a Firewall..................................................................................45
3.4. Multiple SSM Sessions..................................................................................................................47
3.5. SSM Window Conventions...........................................................................................................47
3.6. Common Window Elements..........................................................................................................50
3.7. Help Menu Overview....................................................................................................................52
3.8. Monitor, Operations and Configure Menus Overview...................................................................53
3.8.1. Monitor Menu..........................................................................................................................................53
3.8.2. Operations Menu.....................................................................................................................................54
3.8.3. Configure Menu.......................................................................................................................................55
3.9. SSM Specific Windows.................................................................................................................56
3.9.1. HPSS Login.............................................................................................................................................56
3.9.2. About HPSS.............................................................................................................................................58
3.9.3. HPSS Health and Status...........................................................................................................................58
3.9.3.1. SM Server Connection Status Indicator .........................................................................................59
3.9.3.2. HPSS Status....................................................................................................................................60
3.9.3.3. HPSS Statistics................................................................................................................................61
3.9.3.4. Menu Tree.......................................................................................................................................62
3.9.3.5. File Menu........................................................................................................................................62
3.9.3.6. View Menu......................................................................................................................................62
3.9.4. SSM Information Windows.....................................................................................................................63
3.9.4.1. System Manager Statistics Window................................................................................................63
3.9.4.2. User Session Information Window.................................................................................................67
3.10. SSM List Preferences..................................................................................................................69
Chapter 4. Global & Subsystem Configuration...................................................................................72
4.1. Global Configuration Window......................................................................................................72
4.2. Storage Subsystems ......................................................................................................................74
4.2.1. Subsystems List Window.........................................................................................................................74
4.2.2. Creating a New Storage Subsystem.........................................................................................................76
4.2.3. Storage Subsystem Configuration Window.............................................................................................76
4.2.3.1. Create Storage Subsystem Metadata...............................................................................................79
4.2.3.2. Create Storage Subsystem Configuration........................................................................................79
4.2.3.3. Create Storage Subsystem Servers..................................................................................................80
4.2.3.4. Assign a Gatekeeper if Required.....................................................................................................80
4.2.3.5. Assign Storage Resources to the Storage Subsystem......................................................................80
4.2.3.6. Create Storage Subsystem Fileset and Junction..............................................................................80
4.2.3.7. Migration and Purge Policy Overrides............................................................................................81
4.2.3.8. Storage Class Threshold Overrides.................................................................................................81
HPSS Management Guide November 2009
Release 7.3 (Revision 1.0) 4
4.2.4. Modifying a Storage Subsystem..............................................................................................................81
4.2.5. Deleting a Storage Subsystem..................................................................................................................81
Chapter 5. HPSS Servers.......................................................................................................................83
5.1. Server List.....................................................................................................................................83
5.1. Server Configuration.....................................................................................................................87
5.1.1. Common Server Configuration................................................................................................................89
5.1.1.1. Basic Controls.................................................................................................................................89
5.1.1.1. Execution Controls..........................................................................................................................90
5.1.1.2. Interface Controls............................................................................................................................92
5.1.1.1. Security Controls.............................................................................................................................92
5.1.1.1. Audit Policy....................................................................................................................................94
5.1.1.1. Log Policy.......................................................................................................................................95
5.1.1. Core Server Specific Configuration.........................................................................................................96
5.1.1.1. Additional Core Server Configuration............................................................................................97
5.1.2. Gatekeeper Specific Configuration..........................................................................................................98
5.1.3. Location Server Additional Configuration..............................................................................................99
5.1.4. Log Client Specific Configuration.........................................................................................................100
5.1.1. Log Daemon Specific Configuration.....................................................................................................101
5.1.2. Migration/Purge Server (MPS) Specific Configuration........................................................................101
5.1.3. Mover Specific Configuration...............................................................................................................102
5.1.3.1. Mover Specific Configuration Window........................................................................................102
5.1.3.1. Additional Mover Configuration...................................................................................................104
5.1.3.1.1. /etc/services, /etc/inetd.conf, and /etc/xinetd.d.....................................................................104
5.1.3.1.2. The Mover Encryption Key Files.........................................................................................105
5.1.3.1.3. /var/hpss/etc Files Required for Remote Mover...................................................................106
5.1.3.1.1. System Configuration Parameters on IRIX, Solaris, and Linux...........................................106
5.1.3.1.1. Setting Up Remote Movers with mkhpss.............................................................................108
5.1.3.1.2. Mover Configuration to Support Local File Transfer..........................................................108
5.1.1. Physical Volume Repository (PVR) Specific Configuration.................................................................109
5.1.1.1. Operator PVR Specific Configuration Window............................................................................110
5.1.1.1. 3494 PVR Specific Configuration................................................................................................111
5.1.1.1.1. 3494 PVR Specific Configuration Window.........................................................................111
5.1.1.1.1. 3494 PVR Additional Information.......................................................................................112
5.1.1.2. AML PVR Specific Configuration................................................................................................113
5.1.1.2.1. AML PVR Specific Configuration Window........................................................................113
5.1.1.2.1. AML PVR Additional Information......................................................................................115
5.1.1.1. LTO PVR Specific Configuration.................................................................................................116
5.1.1.1.1. LTO PVR Specific Configuration Window.........................................................................116
5.1.1.1.1. LTO PVR Additional Information.......................................................................................118
5.1.1.2. SCSI PVR Specific Configuration Window.................................................................................118
5.1.1.1. STK PVR Specific Configuration Window..................................................................................120
5.1.1.1.1. STK PVR Additional Information........................................................................................121
5.1.1. Deleting a Server Configuration............................................................................................................123
5.1. Monitoring Server Information....................................................................................................125
5.1.1. Basic Server Information.......................................................................................................................125
5.1.1. Specific Server Information...................................................................................................................127
5.1.1.1. Core Server Information Window.................................................................................................127
5.1.1.1. Gatekeeper Information Window.................................................................................................130
5.1.1.1. Location Server Information Window..........................................................................................132
HPSS Management Guide November 2009
Release 7.3 (Revision 1.0) 5
5.1.1.2. Migration/Purge Server Information Window..............................................................................133
5.1.1.3. Mover Information Window.........................................................................................................133
5.1.1.1. Physical Volume Library (PVL) Information Window.................................................................134
5.1.1.2. Physical Volume Repository (PVR) Information Windows.........................................................135
5.1.1.2.1. Operator PVR Information Window....................................................................................135
5.1.1.2.1. 3494 PVR Information Window..........................................................................................136
5.1.1.2.1. AML PVR Information Window..........................................................................................138
5.1.1.2.1. LTO PVR Information Window...........................................................................................139
5.1.1.2.1. SCSI PVR Information Window..........................................................................................141
5.1.1.2.1. STK PVR Information Window...........................................................................................143
5.1. Real-Time Monitoring (RTM).....................................................................................................144
5.1.1. RTM Summary List...............................................................................................................................145
5.1.2. RTM Detail............................................................................................................................................146
5.2. Starting HPSS..............................................................................................................................149
5.2.1. Starting HPSS Prerequisite Software.....................................................................................................149
5.2.2. Starting HPSS Servers...........................................................................................................................149
5.2.2.1. Starting the Startup Daemons .......................................................................................................149
5.2.2.2. Starting SSM.................................................................................................................................150
5.2.2.3. Starting Other HPSS Servers........................................................................................................150
5.2.2.4. Automatic Server Restart..............................................................................................................151
5.1. Stopping HPSS............................................................................................................................151
5.1.1. Shutting Down an HPSS Server............................................................................................................151
5.1.2. Shutting Down All HPSS Servers..........................................................................................................152
5.1.3. Halting an HPSS Server.........................................................................................................................152
5.1.4. Shutting Down the SSM Server.............................................................................................................152
5.1.5. Shutting Down the Startup Daemon......................................................................................................153
5.1.6. Stopping the Prerequisite Software........................................................................................................153
5.2. Server Repair and Reinitialization...............................................................................................153
5.2.1. Repairing an HPSS Server.....................................................................................................................153
5.2.2. Reinitializing a Server...........................................................................................................................154
5.1. Forcing an SSM Connection........................................................................................................156
Chapter 6. Storage Configuration.......................................................................................................157
6.1. Storage Classes ...........................................................................................................................157
6.1.1. Configured Storage Classes Window....................................................................................................157
6.1.2. Disk Storage Class Configuration..........................................................................................................158
6.1.3. Tape Storage Class Configuration.........................................................................................................162
6.1.4. Storage Class Subsystem Thresholds.....................................................................................................166
6.1.4.1. Disk Storage Subsystem-Specific Thresholds...............................................................................166
6.1.4.2. Tape Storage Subsystem-Specific Thresholds..............................................................................168
6.1.5. Changing a Storage Class Definition.....................................................................................................169
6.1.6. Deleting a Storage Class Definition.......................................................................................................170
6.2. Storage Hierarchies .....................................................................................................................170
6.2.1. Hierarchies Window..............................................................................................................................170
6.2.2. Storage Hierarchy Configuration Window............................................................................................172
6.2.3. Changing a Storage Hierarchy Definition..............................................................................................173
HPSS Management Guide November 2009
Release 7.3 (Revision 1.0) 6
6.2.4. Deleting a Storage Hierarchy Definition...............................................................................................173
6.3. Classes of Service........................................................................................................................174
6.3.1. Classes of Service Window...................................................................................................................174
6.3.2. Class of Service Configuration Window...............................................................................................175
6.3.3. Changing a Class of Service Definition.................................................................................................178
6.3.4. Deleting a Class of Service Definition...................................................................................................179
6.3.5. Changing a File's Class of Service.........................................................................................................180
6.3.6. Canceling a Class of Service Change Request.......................................................................................180
6.4. Migration Policies.......................................................................................................................180
6.4.1. Migration Policies Window...................................................................................................................180
6.4.2. Migration Policy Configuration.............................................................................................................182
6.4.2.1. Disk Migration Policy Configuration............................................................................................182
6.4.2.2. Tape Migration Policy Configuration...........................................................................................185
6.4.2.3. Changing a Migration Policy........................................................................................................188
6.4.2.4. Deleting a Migration Policy..........................................................................................................188
6.5. Purge Policies..............................................................................................................................189
6.5.1. Purge Policies Window..........................................................................................................................189
6.5.2. Purge Policy Configuration...................................................................................................................190
6.5.3. Changing a Purge Policy........................................................................................................................192
6.5.4. Deleting a Purge Policy.........................................................................................................................193
6.6. File Families ...............................................................................................................................193
6.6.1. File Family Configuration......................................................................................................................194
6.6.2. Changing a File Family..........................................................................................................................194
6.6.3. Deleting a File Family...........................................................................................................................194
Chapter 7. Device and Drive Management ........................................................................................196
7.1. Configure a New Device & Drive................................................................................................196
7.1.1. Devices and Drives Window.................................................................................................................202
7.1.2. Enable Variable Block Sizes for Tape Devices.....................................................................................207
7.1.3. Changing a Drive's Configuration..........................................................................................................207
7.1.4. Deleting a Drive's Configuration...........................................................................................................208
7.2. Monitoring Devices and Drives...................................................................................................209
7.2.1. Mover Device Information Window......................................................................................................209
7.2.2. PVL Drive Information Window...........................................................................................................214
7.3. Drive Pools..................................................................................................................................218
7.3.1. Tape Drive Configuration......................................................................................................................219
7.3.2. Client Application Tape Read Requests................................................................................................219
7.3.3. Drive Pool Considerations.....................................................................................................................219
7.4. Changing Device and Drive State................................................................................................220
7.4.1. Unlocking a Drive..................................................................................................................................220
7.4.2. Locking a Drive.....................................................................................................................................220
7.4.3. Repairing the State of a Device or Drive...............................................................................................221
7.4.4. Resetting Drive Statistics.......................................................................................................................221
Chapter 8. Volume and Storage Management...................................................................................223
HPSS Management Guide November 2009
Release 7.3 (Revision 1.0) 7
8.1. Adding Storage Space..................................................................................................................223
8.1.1. Importing Volumes into HPSS .............................................................................................................223
8.1.1.1. Import Tape Volumes Window.....................................................................................................225
8.1.1.2. Selecting Import Type for Tape Cartridges..................................................................................229
8.1.1.3. Import Disk Volumes Window.....................................................................................................230
8.1.1.4. Selecting Import Type for Disk Volumes.....................................................................................234
8.1.2. Creating Storage Resources...................................................................................................................234
8.1.2.1. Create Tape Resources Window...................................................................................................235
8.1.2.2. Create Disk Resources Window....................................................................................................237
8.2. Removing Storage Space.............................................................................................................240
8.2.1. Deleting Storage Resources...................................................................................................................240
8.2.1.1. Rules for Deleting Resources........................................................................................................241
8.2.1.2. Delete Resources Window............................................................................................................241
8.2.2. Exporting Volumes from HPSS.............................................................................................................243
8.2.2.1. Rules for Exporting Volumes........................................................................................................244
8.2.2.2. Export Volumes Window..............................................................................................................244
8.3. Monitoring Storage Space...........................................................................................................247
8.3.1. Active Storage Classes Window............................................................................................................248
8.3.2. MPS Disk Storage Class Information....................................................................................................251
8.3.3. MPS Tape Storage Class Information...................................................................................................256
8.4. Dealing with a Space Shortage....................................................................................................258
8.4.1. Forcing Migration..................................................................................................................................259
8.4.2. Forcing Purge.........................................................................................................................................259
8.4.3. Repacking and Reclaiming Volumes.....................................................................................................259
8.4.3.1. Repack Virtual Volumes Window................................................................................................260
8.4.3.2. Reclaim Virtual Volumes Window...............................................................................................262
8.5. Volume Management...................................................................................................................263
8.5.1. Lookup Cartridges & Volumes Window...............................................................................................263
8.5.2. PVL Volume Information Window.......................................................................................................264
8.5.3. PVR Cartridge Information Window.....................................................................................................265
8.5.4. Core Server Volume and Segment Windows........................................................................................269
8.5.4.1. Core Server Disk Volume Information Window..........................................................................269
8.5.4.2. Core Server Tape Volume Information Window..........................................................................273
8.5.5. Changing Core Server Volume Condition.............................................................................................278
8.5.6. Moving PVR Cartridges to Another PVR.............................................................................................280
8.5.6.1. Move Cartridges Window.............................................................................................................280
8.6. Monitoring and Managing Volume Mounts................................................................................283
8.6.1. PVL Job Queue Window ......................................................................................................................284
8.6.2. PVL Request Information Window.......................................................................................................286
8.6.3. Canceling Queued PVL Requests .........................................................................................................288
8.6.4. Tape Check-In Requests Window.........................................................................................................288
8.6.5. Tape Mount Requests Window..............................................................................................................289
8.6.6. Administrative Tape Dismounts............................................................................................................291
8.7. New Storage Technology Insertion..............................................................................................291
Chapter 9. Logging and Status...........................................................................................................294
HPSS Management Guide November 2009
Release 7.3 (Revision 1.0) 8
9.1. Logging Overview.......................................................................................................................294
9.2. Log Policies.................................................................................................................................295
9.2.1. Creating a Log Policy............................................................................................................................295
9.2.2. Logging Policies Window......................................................................................................................296
9.2.2.1. Logging Policy Configuration Window.......................................................................................297
9.2.3. Changing a Log Policy...........................................................................................................................298
9.2.4. Deleting a Log Policy............................................................................................................................299
9.3. Managing the Central Log...........................................................................................................299
9.3.1. Configuring Central Log Options..........................................................................................................299
9.3.2. Viewing the Central Log (Delogging)...................................................................................................300
9.4. Log Files Information..................................................................................................................300
9.5. Managing Local Logging.............................................................................................................301
9.5.1. Configuring Local Logging Options......................................................................................................302
9.5.2. Viewing the Local Log..........................................................................................................................302
9.6. Managing SSM Alarms and Events ............................................................................................302
9.6.1. Alarms and Events Window..................................................................................................................302
9.6.2. Alarm/Event Information.......................................................................................................................303
9.6.3. Diagnosing HPSS Problems with Alarms and Events...........................................................................305
9.6.4. Controlling SSM Log Message Handling.............................................................................................305
9.6.4.1. Controlling the System Manager Log Message Cache.................................................................305
9.6.4.2. Controlling Log Messages Displayed by hpssgui and hpssadm....................................................306
Chapter 10. Filesets and Junctions......................................................................................................308
10.1. Filesets & Junctions List............................................................................................................308
10.2. Creating an HPSS Fileset...........................................................................................................310
10.2.1. Create Fileset Window.........................................................................................................................310
10.3. Managing Existing Filesets........................................................................................................312
10.3.1. Core Server Fileset Information Window............................................................................................312
10.4. Deleting Filesets........................................................................................................................314
10.5. Creating a Junction....................................................................................................................315
10.5.1. Create Junction Window......................................................................................................................315
10.6. Deleting a Junction....................................................................................................................316
Chapter 11. Files, Directories and Objects by SOID.........................................................................317
11.1. Files & Directories Window......................................................................................................317
11.1.1. File/Directory Information Window....................................................................................................318
11.2. Objects by SOID Window.........................................................................................................322
Chapter 12. Tape Aggregation............................................................................................................323
12.1. Overview of Tape Aggregation..................................................................................................323
12.2. Tape Aggregation Performance Considerations........................................................................323
12.3. Configuring Tape Aggregation..................................................................................................323
Chapter 13. User Accounts and Accounting.......................................................................................325
HPSS Management Guide November 2009
Release 7.3 (Revision 1.0) 9
13.1. Managing HPSS Users...............................................................................................................325
13.1.1. Adding HPSS Users.............................................................................................................................325
13.1.1.1. Add All User ID Types...............................................................................................................325
13.1.1.2. Add a UNIX User ID..................................................................................................................326
13.1.1.3. Add a Kerberos User ID.............................................................................................................327
13.1.1.4. Add an LDAP User ID................................................................................................................327
13.1.1.5. Add an FTP User ID...................................................................................................................327
13.1.1.6. Add an SSM User ID..................................................................................................................328
13.1.2. Deleting HPSS Users...........................................................................................................................328
13.1.3. Listing HPSS Users.............................................................................................................................329
13.1.4. Create an SSM Client Package............................................................................................................329
13.2. Accounting................................................................................................................................330
13.2.1. Accounting Policy Window.................................................................................................................330
13.2.2. Accounting Reports and Status............................................................................................................332
13.2.2.1. Generating an Accounting Report...............................................................................................332
13.2.2.2. Accounting Status Window.........................................................................................................332
13.2.2.3. Interpreting the Accounting Report.............................................................................................333
13.2.3. Accounting Procedures........................................................................................................................335
13.2.3.1. Site Defined Accounting Configuration Files and Procedures...................................................336
13.2.3.1.1. Site Defined Account Maps...............................................................................................336
13.2.3.1.2. Site Defined Account Apportionment Table......................................................................337
13.2.3.1.3. Maintaining Site Defined Accounting Files.......................................................................337
13.2.3.2. Accounting Intervals and Charges..............................................................................................338
Chapter 14. User Interfaces.................................................................................................................339
14.1. Client API Configuration ..........................................................................................................339
14.2. FTP/PFTP Daemon Configuration............................................................................................341
14.3. HPSS VFS Interface Configuration ..........................................................................................345
14.3.1. HPSS VFS Interface Overview............................................................................................................345
14.3.2. Supported Linux Versions...................................................................................................................346
14.3.3. Installation and Configuration of VFS.................................................................................................346
14.3.3.1. Extracting from HPSS Source Tree............................................................................................346
14.3.3.2. Compiling/Building.....................................................................................................................347
14.3.3.3. Modifying the Kernel..................................................................................................................347
14.3.3.4. Client API – Pre-Requisite..........................................................................................................348
14.3.3.5. Other System Configuration Details...........................................................................................350
14.4. Mounting VFS Filesystems.......................................................................................................351
14.4.1. Mounting via the Command Line........................................................................................................351
14.4.2. Mounting via the ‘/etc/fstab’ File.........................................................................................................351
14.4.3. Mount Options.....................................................................................................................................352
14.4.4. Un-mounting an HPSS Filesystem.......................................................................................................354
14.4.5. Linux ‘proc’ Filesystem Statistics........................................................................................................354
14.5. Additional VFS Notes...............................................................................................................355
14.5.1. Building an RPM Package...................................................................................................................355
Chapter 15. Backup and Recovery......................................................................................................356
15.1. HPSS Metadata Backup and Recovery......................................................................................356
15.1.1. HPSS Administrator Responsibilities for DB2....................................................................................356
HPSS Management Guide November 2009
Release 7.3 (Revision 1.0) 10
15.1.2. Overview of the DB2 Backup Process................................................................................................357
15.1.2.1. Configuring DB2 for Online Backup..........................................................................................358
15.1.3. Overview of the DB2 Recovery Process.............................................................................................359
15.2. HPSS System Environmental Backup........................................................................................359
15.2.1. HPSS Filesystem Backup....................................................................................................................359
15.2.2. Operating System Backup....................................................................................................................360
15.2.3. Kerberos Backup ................................................................................................................................360
15.3. HPSS User Data Recovery.........................................................................................................360
15.3.1. Recovering HPSS Files from Damaged HPSS Volumes.....................................................................360
15.3.1.1. Recover Partially Damaged Disk or Tape Volume.....................................................................362
15.3.1.1.1. With Secondary Copies......................................................................................................362
15.3.1.1.2. Without Secondary Copies.................................................................................................363
15.3.1.2. Cleanup Totally Damaged Disk or Tape.....................................................................................364
15.4. DB2 Monitoring........................................................................................................................365
15.5. DB2 Space Shortage..................................................................................................................365
15.5.1. DMS Table Spaces..............................................................................................................................366
15.5.2. SMS Table Spaces...............................................................................................................................366
Chapter 16. Management Tools..........................................................................................................368
16.1. Utility Overview........................................................................................................................368
16.1.1. Fileset and Junction Management........................................................................................................368
16.1.2. Tape Management...............................................................................................................................368
16.1.3. System Info..........................................................................................................................................368
16.1.4. System Management............................................................................................................................369
16.1.5. User Interfaces.....................................................................................................................................370
16.1.6. Testing/Debugging...............................................................................................................................370
16.1.7. Unsupported Tools..............................................................................................................................370
Appendix A. Glossary of Terms and Acronyms.................................................................................373
Appendix B. References.......................................................................................................................385
Appendix C. Developer Acknowledgments.........................................................................................387
HPSS Management Guide November 2009
Release 7.3 (Revision 1.0) 11
List of Tables
Table 1. SSM General Options..............................................................................................................39
Table 2. HPSSGUI Specific Options.....................................................................................................40
Table 3. HPSSADM Specific Options...................................................................................................40
Table 4. Mover TCP Pathname Options.............................................................................................103
Table 1. IRIX System Parameters.......................................................................................................107
Table 2. Solaris System Parameters....................................................................................................107
Table 3. Linux System Parameters......................................................................................................108
Table 1. Auto Restart Count Values...................................................................................................151
Table 1. Server Reinitialization Behavior...........................................................................................154
Table 2. Recommended Settings for Tape Devices............................................................................201
Table 3. Tape Import Types.................................................................................................................229
Table 4. Disk Import Types.................................................................................................................234
Table 5. Banner Keywords..................................................................................................................344
Table 5. HPSS VFS Interface Mount Options....................................................................................352
HPSS Management Guide November 2009
Release 7.3 (Revision 1.0) 12
Preface
Who Should Read This Book
The HPSS Management Guide is intended as a resource for HPSS administrators. For those performing the initial
configuration for a new HPSS system, Chapter 1 provides a configuration roadmap. For both new systems and those
upgraded from a previous release, Chapter 1 provides a configuration, operational, and performance checklist which
should be consulted before bringing the system into production. The remaining chapters contain the details for
configuring, reconfiguring, monitoring, and managing an HPSS system.
Conventions Used in This Book
Example commands that should be typed at a command line will be proceeded by a percent sign (‘%’) and be
presented in a boldface courier font:
% sample command
Any text preceded by a pound sign (‘#’) should be considered comment lines:
# This is a comment
Angle brackets (‘<>’) denote a required argument for a command:
% sample command <argument>
Square brackets (‘[]’) denote an optional argument for a command:
% sample command [optional argument]
Vertical bars (‘|’) denote different choices within an argument:
% sample command <argument1 | argument2>
A byte is an eight bit data octet. A kilobyte, KB, is 1024 bytes (2
10
bytes). A megabyte, MB, is 1048576
bytes (2
20
bytes). A gigabyte, GB, is 1073741824 bytes (2
30
bytes), a terabyte, TB, is 1099511627776
bytes (2
40
bytes), and a petabyte, PB, is 1125899906842624 bytes (2
50
bytes).
HPSS Management Guide November 2009
Release 7.3 (Revision 1.0) 13
HPSS Management Guide November 2009
Release 7.3 (Revision 1.0) 14
Chapter 1. HPSS 7.1 Configuration Overview
1.1. Introduction
This chapter defines the high-level steps necessary to configure, start, and verify correct operation of a
new 7.1 HPSS system, whether that system is created from scratch or created by conversion from a 6.2
HPSS system.
To create or modify the HPSS configuration, we recommend that the administrator first be familiar with
the information described in the HPSS Installation Guide, Chapter 2: HPSS Basics and Chapter 3: HPSS
Planning.
Before performing the procedures described in this chapter, be certain that the appropriate system
preparation steps have been performed. See the HPSS Installation Guide, Chapter 4: System Preparation
for more information. For a system created from scratch, be certain that the HPSS installation and
infrastructure configuration have been completed. See the HPSS Installation Guide, Chapter 5: HPSS
Installation and Infrastructure Configuration for more information. To convert from a 6.2 system, see
the HPSS Conversion Guide for HPSS release 7.1.
1.2. Starting the SSM GUI for the First Time
The HPSS system is ready to be configured using SSM once the HPSS software is installed on the node
and the HPSS infrastructure components are configured. In order to start the SSM GUI you must first
start all infrastructure components and the SSM System Manager as follows:
% /opt/hpss/bin/rc.hpss -m start
Next you will need to add an SSM Admin user. To do this you will need to invoke the hpssuser utility as
follows:
% /opt/hpss/bin/hpssuser -add hpss -<unix|krb> -ssm
The above commands must be done as root!
Once the SSM Admin user has been created, you can invoke the SSM GUI as follows (for hpssgui.pl
options, see the hpssgui man page):
% /opt/hpss/bin/hpssgui.pl
Note: This command may be done as an HPSS user.
When the SSM GUI is running you can begin to configure the rest of HPSS (servers, devices, etc) as
described in the following sections. For more information on SSM, see Chapter 3: Using SSM on page
31.
1.3. HPSS Configuration Roadmap (New HPSS Sites)
The following steps summarize the configuration of an HPSS system when creating the 7.1system from
scratch (not upgrading from a previous release). It is important that the steps be performed in the order
HPSS Management Guide November 2009
Release 7.3 (Revision 1.0) 15
listed. Each step is required unless otherwise indicated. Each step is discussed in more detail in the
referenced section.
1. Configure storage subsystems (Section 4.2.2: Creating a New Storage Subsystem on page 76)
Subsystems can be configured only partially at this time. The Gatekeeper, Default COS, and
Allowed COS fields will be updated in a later step.
2. Configure HPSS storage policies
· Accounting Policy (Section 13.2.1: on page 330)
· Log Policies (Section 9.2: Log Policies on page 295)
· Location Policy (Section 2.4: Location Policy on page 26)
· Migration Policies (Section 6.4: Migration Policies on page 180)
· Purge Policies (Section 6.5: Purge Policies on page 189)
3. Configure HPSS storage characteristics
· Storage Classes (Section 6.1.1: Configured Storage Classes on page 157)
· Storage Hierarchies (Section 6.2: Storage Hierarchies on page 170)
· Classes of Service (Section 6.3: Classes of Service on page 174)
4. Configure HPSS servers (Section 5.1: Server Configuration on page 87)
5. Create global configuration (Section 4.1: Global Configuration Window on page 72)
6. Configure MVR devices and PVL drives (Section 7.1: Configure a New Device & Drive on page
196)
7. Configure file families, if used (Section 6.6: File Families on page 193)
8. Update storage subsystem configurations with Gatekeeper and COS information (Section 4.2.4:
Modifying a Storage Subsystem on page 81 and Section 4.2.3:Storage Subsystem Configuration
Window on page 76)
9. Create the endpoint map (Section 5.1.3: Location Server Additional Configuration on page 99).
1.4. Initial HPSS Startup Roadmap (All Sites)
This section provides instructions for starting the HPSS servers and performing post-startup
configuration. For sites which are converting from 6.2, only step 1 may be necessary. For sites
configuring a new 7.1 system from scratch, all steps are necessary:
1. Start the HPSS servers (Section 5.2.2: Starting HPSS Servers on page 149)
2. Unlock the PVL drives (Section 7.4.2: Locking a Drive on page 220)
3. Create HPSS storage space:
A. Import volumes into HPSS (Section 8.1.1: Importing Volumes into HPSS on page 223)
HPSS Management Guide November 2009
Release 7.3 (Revision 1.0) 16
B. Create storage resources (Section 8.1.2: Creating Storage Resources on page 234)
4. Create additional HPSS Users (Section 13.1.1: Adding HPSS Users on page 325)
5. Create Filesets and Junctions (Section 10.1: Filesets & Junctions List on page 308 and Section
10.5: Creating a Junction on page 315)
6. Create HPSS /log Directory
If log archiving is enabled, using an HPSS namespace tool such as scrub or ftp, create the /log
directory in HPSS. This directory must be owned by hpsslog and have permissions rwxr-xr-x.
The /log directory can be created by the root user using ftp as follows:
% ftp <node> <HPSS Port> # login as root user
ftp> mkdir /log
ftp> quote site chown hpsslog /log
ftp> quote site chmod 755 /log
1.5. Additional Configuration Roadmap (All Sites)
This section provides a high level roadmap for additional HPSS configuration.
1. Configure HPSS User Interfaces (Chapter 14: User Interfaces on page 339)
2. Set up Backup for DB2 and Other Infrastructure (Chapter 15: Backup and Recovery on page 356)
3. Set up High Availability, if desired (HPSS Installation Guide, Chapter 3: HPSS Planning)
4. Optionally configure support for both authentication mechanisms (HPSS Installation Guide,
Section 5.9: Supporting Both Unix and Kerberos Authentication for SSM)
1.6. Verification Checklists (All Sites)
This section provides a number of checklists regarding configuration, operational and performance
issues.
1.6.1. Configuration Checklists
After HPSS is running, the administrator should use the following checklists to verify that HPSS was
configured or converted correctly:
Global Configuration
Verify that a Default Class of Service has been selected.
Verify that a Root Core Server has been selected.
Storage Subsystem Configuration
Verify that a Default Class of Service has been selected if desired.
Verify that a Gatekeeper has been selected if gatekeeping or account validation is required.
Verify that the COS Name list has been filled in correctly.
HPSS Management Guide November 2009
Release 7.3 (Revision 1.0) 17
Verify that a Core Server and Migration Purge Server have been configured for each storage
subsystem.
Verify that each storage subsystem is accessible by using lsjunctions and ensuring that there is at
least one junction to the Root fileset of each subsystem. (The root fileset for a given subsystem
can be found in the specific configuration for the subsystem’s Core Server)
Servers
Verify that all required HPSS servers are configured and running.
Verify that all servers are configured with the intended level of logging, whether using their
server specific policies or the default policy. Also, verify that all Core Server and Mover log
policies have the DEBUG flag turned on to aid in the diagnostics of any future problems.
Devices and Drives
Verify that all devices/drives are configured and each is assigned to an appropriate PVR/Mover.
For tape devices, verify that the “Locate Support” option is enabled if supported.
For tape devices, verify that the “NO-DELAY” option is enabled if supported by the device.
For disk devices, verify that the “Bytes on Device” and “Starting Offset” values are correct.
Verify that all configured drives are unlocked.
Storage Classes
Verify that all storage classes are defined and each has sufficient free storage space.
Verify that each storage class that will be migrated and purged is configured with the appropriate
migration and purge policy.
Verify that no storage class at the lowest level in a hierarchy is configured with a migration or
purge policy.
To support repack and recover of tape volumes, verify that the stripe width of each tape storage
class is less than half of the number of available drives of the appropriate drive type.
Storage Hierarchies
Verify that all storage hierarchies are defined.
Classes of Service (COS)
Verify that all classes of service are defined.
Verify that each COS is associated with the appropriate storage hierarchy.
Verify that the COS is configured to use the characteristics of the hierarchy and the underlying
storage classes. In addition, verify that the classes of service have the correct Minimum File Size
and Maximum File Size values. If these sizes overlap, the file placement may be indeterminate
when the user creates a file using the size hints. For classes of services which are not to be used as
part of standard file placement, set their Force Selection flag to ON so that they will only be
HPSS Management Guide November 2009
Release 7.3 (Revision 1.0) 18
chosen if specified by their COS ID.
Verify that classes of service with multiple copies have the Retry Stage Failures from
Secondary Copy flag enabled.
File Families, Filesets, and Junctions
Verify that file families and filesets are created according to the site’s requirements.
Verify that each fileset is associated with the appropriate file family and/or COS.
Verify that each fileset has an associated junction.
User Interfaces
Verify that the desired HPSS user interfaces (FTP, PFTP, Client API, etc.) are configured
(Chapter 14 : User Interfaces on page 339).
1.6.2. Operational Checklists
The administrator should follow these checklists to ensure that HPSS is operating properly.
Configured user interfaces
Create files of various sizes on each defined COS.
Verify that the files are created in the expected storage class with acceptable transfer rates.
If necessary, redefine the associated storage class definition to enhance the throughput
performance.
The characteristics fields (Transfer Rate, Latency, etc.) in the storage class and class of service
definition should be updated to reflect actual performance results.
After the files are created on the correct storage class, verify that the files are created with correct
file ownerships and permissions.
Verify that other file operations (delete, chmod, copy, etc.) work.
If accounting is configured, verify that the files are created with the correct accounting indices.
If file families, filesets and junctions are configured, verify that they work as intended.
Devices and Drives
Ensure that each drive mounts, reads, and writes.
Storage Management
Verify that migration and purge operations work as intended.
Start Migration and Purge operations manually to verify that files are migrated and purged
correctly.
Verify that files can be accessed after being migrated/purged.
HPSS Management Guide November 2009
Release 7.3 (Revision 1.0) 19
Monitor free space from the top level storage class in each hierarchy to verify that the migration
and purge policy are maintaining adequate free space.
1.6.3. Performance Checklist
Measure data transfer rates in each COS for:
Client writes to disk
Migration from disk to tape
Staging from tape to disk
Client reads from disk
Transfer rates should be close to the speed of the underlying hardware. The actual hardware speeds can
be obtained from their specifications and by testing directly from the operating system (e.g., using dd to
read and write to each device). Keep in mind that transfer performance can be limited by factors external
to HPSS. For example, HPSS file read performance may be limited by the performance of the UNIX file
system writing the file rather than limits inside HPSS.
HPSS Management Guide November 2009
Release 7.3 (Revision 1.0) 20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249
  • Page 250 250
  • Page 251 251
  • Page 252 252
  • Page 253 253
  • Page 254 254
  • Page 255 255
  • Page 256 256
  • Page 257 257
  • Page 258 258
  • Page 259 259
  • Page 260 260
  • Page 261 261
  • Page 262 262
  • Page 263 263
  • Page 264 264
  • Page 265 265
  • Page 266 266
  • Page 267 267
  • Page 268 268
  • Page 269 269
  • Page 270 270
  • Page 271 271
  • Page 272 272
  • Page 273 273
  • Page 274 274
  • Page 275 275
  • Page 276 276
  • Page 277 277
  • Page 278 278
  • Page 279 279
  • Page 280 280
  • Page 281 281
  • Page 282 282
  • Page 283 283
  • Page 284 284
  • Page 285 285
  • Page 286 286
  • Page 287 287
  • Page 288 288
  • Page 289 289
  • Page 290 290
  • Page 291 291
  • Page 292 292
  • Page 293 293
  • Page 294 294
  • Page 295 295
  • Page 296 296
  • Page 297 297
  • Page 298 298
  • Page 299 299
  • Page 300 300
  • Page 301 301
  • Page 302 302
  • Page 303 303
  • Page 304 304
  • Page 305 305
  • Page 306 306
  • Page 307 307
  • Page 308 308
  • Page 309 309
  • Page 310 310
  • Page 311 311
  • Page 312 312
  • Page 313 313
  • Page 314 314
  • Page 315 315
  • Page 316 316
  • Page 317 317
  • Page 318 318
  • Page 319 319
  • Page 320 320
  • Page 321 321
  • Page 322 322
  • Page 323 323
  • Page 324 324
  • Page 325 325
  • Page 326 326
  • Page 327 327
  • Page 328 328
  • Page 329 329
  • Page 330 330
  • Page 331 331
  • Page 332 332
  • Page 333 333
  • Page 334 334
  • Page 335 335
  • Page 336 336
  • Page 337 337
  • Page 338 338
  • Page 339 339
  • Page 340 340
  • Page 341 341
  • Page 342 342
  • Page 343 343
  • Page 344 344
  • Page 345 345
  • Page 346 346
  • Page 347 347
  • Page 348 348
  • Page 349 349
  • Page 350 350
  • Page 351 351
  • Page 352 352
  • Page 353 353
  • Page 354 354
  • Page 355 355
  • Page 356 356
  • Page 357 357
  • Page 358 358
  • Page 359 359
  • Page 360 360
  • Page 361 361
  • Page 362 362
  • Page 363 363
  • Page 364 364
  • Page 365 365
  • Page 366 366
  • Page 367 367
  • Page 368 368
  • Page 369 369
  • Page 370 370
  • Page 371 371
  • Page 372 372
  • Page 373 373
  • Page 374 374
  • Page 375 375
  • Page 376 376
  • Page 377 377
  • Page 378 378
  • Page 379 379
  • Page 380 380
  • Page 381 381
  • Page 382 382
  • Page 383 383
  • Page 384 384
  • Page 385 385
  • Page 386 386
  • Page 387 387
  • Page 388 388

IBM RELEASE 7.3 User manual

Category
Software
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI